在退火过程中自动进行泄压。
第三章，我们考虑了欧氏空间上的退火过程。
In the third chapter, we discuss the annealing process on the Euclidean space.
本文还讨论了瞬态退火过程中的增强扩散效应。
In addition, the transient enhanced diffusion during the rapid annealing of boron implanted silicon has also been discussed.
温度和热应力是罩式退火过程中的两个重要参数。
The temperature and thermal stresses are important parameters in the process of bell type annealing.
没有中间温度预退火过程的薄膜，显示出（100）择优取向；
PLZT thin film without intermediate pre-annealing process displays (100)-preferential orientation.
整个退火过程中，晶体缺陷的变化对铝阳极活性改变影响最大。
For the whole process of annealing, the leading factor for the change of activity of the al alloy anode was the change of crystal defects.
结果发现，中间温度预退火过程可以影响薄膜对晶型结构的选择。
The results show that the intermediate pre-annealing process can affect the selection of crystalline texture.
整个退火过程中，晶体缺陷的变化对铝合金阳极活性改变影响最大。
For the whole process of homogenizing annealing, the leading factor for the change of Al-alloy-anode's activation properties is the change of crystal defects.
建立了以温度跟踪为目的的全氢罩式炉钢卷退火过程在线数学模型。
A on-line mathematical model for tracing coil temperature of the bell-type furnace is established based on the two-dimensional, axisymmetric, transient heat conduction equation.
在不同导热系数条件下，采用两种有限元模型对退火过程进行模拟和求解。
In different coefficient of thermal conductivity, two kinds of finite element model were used to simulate and solve for the annealing process.
这可能是由于在退火过程中，界面区域的原子在界面处相互扩散所引起的。
This is possibly due to a new phase formation induced by the atoms' inter-diffusion at the interface.
于莉：这只鸟很难做，由于原料是瓷料玻璃，半成品在退火过程中容易冷爆。
Emily: It's difficult to make. The raw material of this bird is a mixture of glass and porcelain, so the semi-finished products are easy to burst during the annealing procedure.
以40t铝材退火炉内铝卷为研究对象，建立了铝卷退火过程的导热数值模型。
The numerical value model of thermal conduction was established for annealing process of aluminium foil coils based on annealing furnace loaded with 40 t capacities.
结合退火工艺过程的分析，建立了全氢炉退火过程钢卷温度场模拟计算的逻辑体系。
Combining with the analysis of the annealing craft process, the simulation system for the calculation of the coil's temperature has been developed.
将硅本征氧化层与硅热氧化层两种键合界面在退火过程中的行为进行了理论分析与比较。
Wafer pairs with bonding interface being native oxide or thermal oxide have different bonding behavior in the annealing process, which were investigated and compared.
本文用激光探针测量了砷离子注入硅在CW CO_2激光退火过程中的实时分辨反射率。
The time-resolved optical reflectivity of as ion-implanted silicon during CW CO_2 laser annealing has been measured by using laser probes.
退火过程中析出的二次碳化物阻碍再结晶晶界的迁移，从而影响再结晶层的界面推移速率。
The secondary carbides have a strong influence on recrystallization rate by retarding the migration of recrystallization grain boundaries.
2005年，他实验室的一位博士后研究员利用一种水退火过程在潮湿环境下对丝类进行了缓慢的重组。
In 2005, a postdoctoral researcher in his laboratory developed a water annealing process, reconstituting the silks slowly in a humid environment.
在带钢连续退火过程中，带钢张力的波动是造成带钢产品质量下降及制约连续退火机组高速运行的重要原因。
In continuous annealing process, strip tension is an important factor that decides whether the continuous annealing line works steadily and promptly or not.
通过直接栅电流测量方法研究了热载流子退化和高栅压退火过程中PMOSFET ' s热载流子损伤的生长规律。
The growth laws of hot carrier damage of PMOSFET's during the hot carrier degradation and the high field annealing are studied by direct gate current measurement.
皱褶是铝及铝合金带材生产中常见的缺陷，介绍了我公司带材退火过程中产生的皱褶，该缺陷形成的原因及其预防措施。
Rumple is the familiar defect during the producing of aluminium & aluminium alloy strip. This article introduces a sort of rumple producing during anneal, discusses causes and preventive measures.
文中根据混合离散变量的特点，提出了几种邻域状态的产生函数和迭代方案，给出了适宜的模拟退火过程的冷却进度表。
According to the property of mixed-discrete variable problem, an adjacent producing function states is proposed, and a suitable annealing schedule to this optimzation is given.
并结合对钢卷导热方程和边界条件的离散求解，实现了钢卷温度场模拟计算的同时，获取了全氢炉退火过程的工艺制度。
Basing on the heat transfer mathematical models and the simulation system, the temperature fields of coils during annealing process have been calculated.
用电阻应变片法测试了管棒材拉拔、矫直和退火过程中产品表面残余应力，研究了管棒材残余应力随工艺参数变化的规律。
The surface residual stress of tube and bar after drawing straightening and annealing, under different processing conditions, were measured by means of resistance strain gauge.
叙述了某大型辊底式炉在轴承套圈余热退火过程中，采用可编程控制器(PLC)作为控制核心，自动进行工作的机械液压传动控制系统的组成、PLC软件设计及编制。
The authors describe the constituent of hydraulic control system and the design of PLC software for some large roller hearth furnace with PLCs as its control centre for annealing bearing RACES.
这过程被称为完全退火，因为它去除了以前组织结构的所有痕迹、细化晶粒并软化金属。
This process is known as full annealing because it wipes out all trace of previous structure, refines the crystalline structure, and softens the metal.
三个过程：它们是淬火、回火和退火。
而在真空退火的生产过程中，退火工件温度的精确控制是一个典型的非线性、大时滞、强耦合的复杂控制问题。
The accurate control of the work pieces temperature in vacuum annealing furnace is a typical nonlinear large time delay and cross coupling complicated problem.
而在真空退火的生产过程中，退火工件温度的精确控制是一个典型的非线性、大时滞、强耦合的复杂控制问题。
The accurate control of the work pieces temperature in vacuum annealing furnace is a typical nonlinear large time delay and cross coupling complicated problem.
应用推荐