在地面支持设备上对系统功能进行了仿真和测试。
The system function was simulated and testing under ground support equipment.
利用粒子群的优化算法，建立侵彻子母弹最佳抛撒高度的求解模型，并进行了仿真计算。
By using Particle Swarm Optimization (PSO), a model was built up for calculating the optimum dispersion height of intrusive submunition dispenser, and mathematical simulation was carried out.
研究了扩展拉格朗日方法的人工神经网络模型，实现了其电路结构，并进行了仿真实验。
We have investigated artificial neural network models based on an augmented Lagrange method, and accomplished the circuit structure and the simulation experiments.
分析了单模激光系统的混沌特性，并对单模激光系统的混沌同步与控制进行了仿真研究。
The chaotic characteristic of single mode laser system is analyzed. The simulation experiments of synchronizing and controlling chaos in single mode laser are studied.
讨论了光子与大气的相互作用，利用量子计算语言对大气信道中的量子密钥分配进行了仿真。
We discussed the interaction between a photon and the atmosphere, and simulated the quantum key distribution protocol between atmospheric channels using the quantum computation language.
设计了一种蜂窝系统无线定位中使用的扩展卡尔曼滤波(ekf)算法，对其性能进行了仿真。
An extended Kalman filtering (EKF) algorithm is designed for radiolocation in cellular communication system, simulation is conducted to examine its performance.
对小扰动下感应电动机的动态电压稳定性进行了仿真，并运用其负荷特性对仿真结果进行了分析。
Simulation of dynamic voltage stability of induction motor in the context of small disturbances and analyses of the simulation results with its load characteristics.
文中还应用该仿真模型对具有不同参数的UWB信号功率谱进行了仿真，验证仿真模型的可行性。
Then the power spectral densities of UWB signals with difference parameters are simulated by the simulation model, and the feasibility of the model is validated.
最后，对某一具体基坑工程中的分级开挖和加钉同时进行了仿真模拟计算，取得了较满意的结果。
At last, some simulating calculations for an engineering excavation by phases as well as simultaneously nailing are conducted, and the results obtained are satisfactory.
文中对带有自动驾驶仪飞机投弹的稳定性进行了分析，对其过程进行了仿真研究和控制律优化设计。
The paper analyses the launching missiles stability of aircraft with auto-flight system, and simulates the process of launching and optimizes the control law of the auto-flight system.
对几种快速BP算法的特点及性能作了归纳和对比，并对一个非线性函数逼近实例进行了仿真研究。
In this paper, the characteristic and performance of various fast BP algorithms are generalized and contrasted through study on simulation of nonlinear function approximation experiment.
本文采用数字求解，并用所得出的状态空间模型对同步电动机步进运动的稳态特性进行了仿真研究。
The solutions are found by computer and the steady -state characteristics of synchronous motor on step motion are simulated and analyzed by using these state space models.
建立了冗余度机械臂协调操作的数学模型，利用该模型对两机器人抓持同一刚性物体进行了仿真研究。
The kinematical model for coordinating manipulators is constructed and research is done through simulation examples for two coordinating manipulators holding one object.
改变输入信号幅度、反馈增益系数、放大器增益、比较器增益等参数以及相位补偿器的位置进行了仿真。
Simulations have been done through adjusting parameters such as input signal amplitude, feedback gain, amplifier gain, comparator gain and the position of the phase compensator.
并且通过建立速度匹配传递对准的状态空间模型，对上述方案进行了仿真研究，证实了该方案的正确性。
And by establishing state roomage model of velocity matching transfer alignment made simulation and study to this scheme, confirmed the feasibility of this scheme.
其次，以前步分析结果为基础，采用“场路混合法”对迎击式交流接触器电磁机构的动特性进行了仿真。
Secondly, on the basis of previous analysis results, this paper makes a emulation program of electromagnetic mechanism dynamic characteristics, combining with the magnetic circuit method.
最后本文采用定子磁场定向的矢量控制策略，结合转速扰动功率观测的控制算法对转子侧进行了仿真验证。
Finally, simulating experiment for the whole system is carried through with the stator flux-oriented vector strategy and control arithmetic of rotor speed perturb and power observation.
对所给出的补偿方法进行了仿真研究，结果验证了单相statcom进行快速平衡化补偿的能力比较强。
It is proved by the simulation results of the proposed compensation method that the single phase STATCOM possesses the ability to carry out fast balancing compensation.
为了提高船载装置设计的安全性和可靠性，对基于海况环境激励的某船载装置动力学特性进行了仿真分析。
In order to improve design safety and reliability on ship-borne device, dynamic character of a ship-borne device was simulated based on sea state excitation.
着重对数据接入延时与语音负载、数据长度、数据发送间隔、系统容量等参数之间的关系进行了仿真分析。
The relationship between the access delay and the voice traffic, data length, data transmission interval, system volume is analyzed through the simulation.
并且进行了仿真，结果表明该方法的合理性、有效性，为实际电机控制系统的设计和调试提供了新的思路。
The simulation result proves that this method is reasonable and deficient and offers a new thought way for designing and debugging actual control system of motor.
作者提出低频时码信号的正交扫描解调技术，从理论上分析了正交扫描原理和实现方法，并进行了仿真测试；
The orthogonal sampling demodulating technique for low frequency time-code signal is introduced. Based on the theoretical analysis about its principle and implement method, The simulation is tested.
对在多用户和频率选择性瑞利衰落环境下的下行链路的误比特率性能进行了仿真，其结果表明系统是可行的。
The simulation of error bit rate performance for multi -channel and frequency -selective Rayleigh fading is carried out, and the simulation results show that the system is.
文章介绍了利用芯片ADMC331设计DC直流驱动电源的方案，进行了仿真并对设计样机进行严格测试。
This paper introduces the use of the chip design ADMC331 DC driver power supply program, carried out a simulation prototype design and rigorous testing.
另外，还对滤波器的结构和参数对输出直流电压脉动和发电机相电流波形的影响及相电流谐波进行了仿真分析。
In addition, the thesis analyzes the influence of the filter structure and parameters on the output DC voltage ripple and the shape of phase currents, as well as harmonics of phase currents.
为改善功率因数，对神经网络控制器(NNC)与电流模式控制器(CMC)的控制效果进行了仿真比较研究。
To correct the power factor, the controlling effect of both neural network controller (NNC) and current mode controller (CMC) is researched in this paper.
针对每一种控制算法分别采用阶跃风速和紊流风速信号进行了仿真，仿真结果验证了控制算法的可靠性和有效性。
The simulation is conducted for each control strategy in different wind situations. The results show the reliability and affectivity of the proposed control strategy.
针对每一种控制算法分别采用阶跃风速和紊流风速信号进行了仿真，仿真结果验证了控制算法的可靠性和有效性。
The simulation is conducted for each control strategy in different wind situations. The results show the reliability and affectivity of the proposed control strategy.
应用推荐