该系统由工业PC，DMC300运动控制器，放电状态检查卡，A/D 卡，I/O 卡和脉冲电源组成。
The system is composed of industrial PC, DMC300 motion controller, discharge status checking card, A/D card, I/O card and pulse power.
开放式运动控制器是数控系统的核心。
运动控制器是开放式运动控制系统的核心。
Motion controller is the core of opening motion control system.
微机或单机运动控制器为两，四，六，八轴。
PC-based or stand-alone motion controllers for two, four, six or eight axes.
介绍了开放式运动控制器PMAC的结构及原理。
In this paper, the structure and principle of PMAC open movement controller were introduced.
介绍了开放式运动控制器PMAC的结构及原理。
In this paper, the structure and principle of PMAC open movement controller was introduced.
台达运动控制器20pm已经在点胶行业广泛应用。
Delta motion controller 20pm has been widely used in rubber industry.
讨论了一种基于双映射神经网络的机械臂运动控制器。
The application of a robotic manipulator based on mutual mapping neural network(MMNN) is discussed.
本文提出了一套基于DSP内核的运动控制器的设计方案。
A design is described in the paper that step motor motion controller is a down location control unit based on DSP kernel.
作者运用该神经网络算法设计了水下机器人的运动控制器。
The algorithm was applied to the control of an autonomous underwater vehicle designed by HEU.
介绍了一种由数字信号处理器构成的军用操作机器人运动控制器。
A motion controller with DSP for military operation robot is introduced in this pa-per.
复杂控制算法实现，是目前运动控制器实现技术研究的一个热点。
Implementation of algorism of complex control is one of the hot research for technique of motion controller implementation.
阐述了该运动控制器在X、Y两轴数控伺服工作台中的应用原理。
The application principle of the motion controller in X, Y numerical servo platform was discussed.
开放式运动控制器市场的迅速扩大，给我们带来了新的机遇和挑战。
The fast expanding market of motion controller with open architecture gives us new challenge and opportunity.
可编程的多轴运动控制器，稳定性和操作性达到国内外领先技术水平。
Programmable multi axis motion controller, stability and operation to achieve the leading technical level at home and abroad.
采用触摸屏与运动控制器相结合的方式，开发出三伺服机械手的控制系统。
The combination of touch-screen and motion controller is used to develop the control system of the three servo manipulator.
针对影响运动控制性能的因素，设计了一种新型的高精度鲁棒运动控制器。
A novel high accuracy robust motion controller is designed aiming at the factors that affect the performance of motion control.
讨论相应的一些支撑技术即虚拟设计系统、虚拟仪器系统和虚拟运动控制器。
Some enable technologies, such as virtual design system, virtual device system and virtual motion controller, are discussed.
讨论了一种采用ARM处理器及FPGA设计的7轴电动机伺服运动控制器。
This paper presents a high performance 7-axis controller developed, with the cores of ARM and FPGA.
通过对可编程多轴运动控制器PMAC的应用开发得以实现，取得了良好效果。
Programmable Multiple Axis Controller(PMAC) is used in the system and good result has been gotten.
最后，采用PMAC卡作为系统的运动控制器，对本文所设计的位置控制器进行实验验证。
Finally, using the PMAC as the movement controller of the servo system, experimentation validates the position servo system controller designed in this thesis.
基于智能运动控制器的二次插补算法可分成两次运算，即采取离线粗插补和实时精插补完成。
The two interpolate algorithm based on intelligent motion controller can be partitioned into two times algorithm, viz. first interpolate in offline and second interpolate on real time.
本文主要针对高性能数字运动控制器中的轨迹规划，研究出最具运动平滑性的轨迹规划算法。
Therefore, this paper focuses on study of trajectory planning for high-performance digital motion controller, and gets the smoothest trajectory planning algorithm.
系统使用可编程多轴控制器(PMAC)作为伺服运动控制器，具有很强的灵活性和可靠性。
The system USES programmable multi-axis controller (PMAC) as servo motion controller. It is flexible and reliable.
提出一种用运动控制芯片PCL240AS构造的伺服电动机和步进电动机通用的运动控制器。
A motion controller interchangeable for servo motor and step motor constructed by motion control chip PCL240AS is introduced.
运动控制器系统还为用户提供运动控制函数库，用户在此基础上易于实现特定的运动控制要求。
The lib of motion control function is also provided for users, it's easier to implement special requirement by using it.
基于工控机和多任务运动控制器的缠绕机CAM系统采用电子齿轮方式实现缠绕机同步运动控制。
CAM system based on industry computer and multi-task motion controller adopts the electrical gear to accomplish synchronous motion control of the winding machine.
基于网络的开放式结构和嵌入式结构的通用运动控制器逐步成为自动化控制领域里的主导产品之一。
General movement controller, which is based on the open and embedded structure of Internet, is gradually becoming one of the main products in automatic control field.
文中重点叙述了PMAC可编程多轴运动控制器、松下交流伺服电机和驱动器及工控机组成的硬件系统。
This thesis gives great emphases on the hardware system consisted of PMAC, Panasonic AC servo-motors, drivers and IPC.
本文针对多轴纤维缠绕机数控系统，提出了一种集成于运动控制器平台上的纤维缠绕张力控制系统的方案。
A new tension control system integrated into the platform of motion controller is developed in this article for the numerical control system of multi-axes filament winding machine.
应用推荐