图2展示安装路径已经更改为一个拥有足够空间、可以处理将被比较的所有输出的驱动器。
Image 2 shows that the installation path has been changed to a drive that has sufficient space on it to handle all the outputs that will be compared.
非连接对象JoinRowSet的输出与我们在服务器端执行join查询得到的数据完全一致(与表3比较)。
The output of our disconnected JoinRowSet object correctly parallels the data we obtained when we performed our server side database JOIN query (compare to Table 3).
使用您喜欢的文本编辑器清理script输出文件比较容易，网上有各种清理脚本可用。
It's easy enough to clean up a script output file using your favorite text editor, and a variety of cleanup scripts are available on the web.
传感器的安装位置尽量远离大功率设备，因为它本身的输出信号就比较弱，通常为毫伏级，极易受到干扰。
Sensor is installed as far away from high-power devices, because its own output signal is relatively weak, typically millivolts, vulnerable to interference.
输入模拟信号立即与所有的参考电压通过一串高速比较器进行比较，高速比较器用于产生二进制输出。
The analog signal is compared with all the reference voltages at once by a string of high-speed comparators whose outputs are used to generate the binary output.
本文比较了在不同的采样开关管和源随器组合方式下，电路的输出摆幅和线性范围的变化。
The output swing and linearity range of the ROIC were compared, using different combinations of the CDS switch and SF structure.
通过比较探测器的输出值与其附近湿度变化曲线，从原理上分析了误报发生的原因。
The humidity curve near the fire detector was compared with the output of the smoke fire detector to analyze the cause of false alarms.
最后通过滤波器加载输出腔的模拟计算结果与冷测结果的比较和分析，进一步验证该方法的可靠性。
Finally, a output cavity loaded with a filter is computed and the computed result is analyzed and compared with cold test data in order to conform the reliability of this simulated computation method.
参考和模拟输入电压驱动神经网络，数字输出来源于网络中的比较器。
Reference and analog-input voltages drive the neural networks, and digital outputs come from the comparators in the networks.
这个传感器的电路模拟输出电压发送到3迟滞比较器。
For this the analog output voltage of the sensor circuit is sent to 3 comparators with hysteresis.
对致动器输出特性虚拟测试系统进行联合调试，对其测试结果进行分析，并与传统仪器的测试结果进行了比较。
The virtual testing system for actuator output characteristics is jointly debugged and testing results are analyzed and compared with the results of traditional instruments.
首先，本文在研究DSP原理的基础上，重点研究了事件管理器中通用定时器的比较操作与PW M波形输出原理以及捕捉单元工作原理。
Firstly, the paper studies the theory of the DSP, especially the theory of the compare operation and the PWM pulse outputting and catch cell.
本发明提供一种用于确定输出到比较器的输入电压值的方法及光驱动电路。
The invention provides a method of performing input voltage value to comparator and an optical-driving circuit.
相位频率检测器比较基准时钟信号和反馈时钟信号从而在一个或更多个输出信号中生成脉冲。
A phase frequency detector compares a reference clock signal to a feedback clock signal to generate pulses in one or more output signals.
高精度大电流控制器有着广泛的应用，但在高共模电压情况下输出电流的检测电路比较复杂。
The high precision and large current controller are used widely. But in the situation where there is high common-mode voltage, the detection circuit of the output current is very complex.
抽运方法已成为影响光纤激光器输出功率的关键因素，有比较重要的意义。
The pumping method has become the key factor which affects the output power of fiber lasers.
不然，分别比较各个模型输出数据，使用一种棒状感应器直接测量par。
Or else, respectively as a comparison to the model output, we can measure par directly in the greenhouse, using a rod sensor.
同时还详细描述了前置音频放大器，三角波产生电路、比较器，死区控制电路，输出驱动电路等子模块的设计内容。
And then describe the module of pre audio amplifier, triangle generator, comparator, death time control and output driver etc.
频率比较器比较基准时钟和输出时钟的频率，并输出频率比较信号。
A frequency comparator compares the frequency of a reference clock with that of an output clock and outputs a frequency comparison signal.
相位比较器比较基准时钟和输出时钟的相位，并输出相位比较信号。
A phase comparator compares the phase of the reference clock with that of the output clock and outputs a phase comparison signal.
它由传感器、信号放大电路、比较输出电路、延时电路和可控硅组成。
The utility model is composed of a sensor, a signal amplification circuit, a comparison output circuit, a delay circuit and controllable silicon.
该传感器比较当前与教曲线代表的集装箱空，充满回声的地位，并设置相应的输出。
The sensor compares the current echo with the taught curves representing the empty and filled status of the container and sets the output accordingly.
本文分析了DC/DC变换器一些基本拓扑的结构及其特点，对隔离式DC/DC变换器原边和副边拓扑进行了分析和比较，得出了隔离式低压大电流输出DC/DC变换器的优选拓扑结构。
Secondly, this dissertation educes the promising topologies for isolated low-voltage high-current output DC/DC converters by analyzing and comparing the basic topologies of the DC/DC converters.
它通过背景相减实现目标检测，然后把输出的结果交给Kalman滤波器，预测出下一出现的位置(红色)，可以和实际出现的位置(绿色)相比较。
Through background subtraction to achieve target detection, and then output the results to the Kalman filter, prediction next appear (red), can occur and the actual position (green) compared.
介绍了一种结构比较简单、输出与输入同轴且输出在电机与减速器中间的减速传动。
One reducing transmission form the middle of motor and reducer, which has the same shaft for output and input and a simple structure, is introduced.
该芯片采用半桥式拓扑结构，由积分器、比较器、驱动输出级以及反馈网络组成。
The designed IC is based on the half bridge topology, and consists of integrator, comparator, output stage and feedback.
FPGA的输出是固定频率、计数器和数字比较器使占空比可变的典型波形(表1)。
The output of the FPGA is typically a waveform with a fixed-frequency, variable-duty cycle, which a counter and a digital comparator generate (Listing 1).
该方法是在传统的两态滞环控制的基础上，增加过零比较器，通过优化逆变器的开关逻辑，从而实现滞环控制下并网逆变器的三态输出。
Through adding a zero-crossing comparator and optimizing the inverter switching logic, this method which is based on the traditional two-state hysteresis control can achieve three-state outputs.
模糊控制器的两个输入变量为设定值，与灰色预测模型的输出值之间比较得到预测误差及其预测误差的变化率。
The predictive error and its rate of change of the gray predictive model are taken to the fuzzy controller as two input variables.
模糊控制器的两个输入变量为设定值，与灰色预测模型的输出值之间比较得到预测误差及其预测误差的变化率。
The predictive error and its rate of change of the gray predictive model are taken to the fuzzy controller as two input variables.
应用推荐