轮胎包容特性模型可用于汽车振动分析与动态载荷分析。
The established model can be applied to the analysis of vibration and dynamic load of vehicles.
上述管道运动的阻力计算公式可直接应用于采矿系统的载荷分析。
Such calculation formula for resistance to motion also can be directly applied into the load analysis for mining system.
按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。
Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.
论文包括四部分：紊流风场模型、风力机载荷分析、风力机叶片载荷分布、风力机叶片可靠性分析。
The paper includes four parts: turbulence wind field model, the load of the wind turbine, the load distribution of wind turbine blade, the wind turbine reliability analysis.
从罐体承受的主要载荷分析、测试前的准备工作到罐体的静、动态试验以及应力电测试验数据处理等都作了简要地介绍。
The major loads borne on the tank body are analyzed, and stress measurements, from the preparation work to static and dynamic test conditions as well as data processing are presented in this article.
首先，从频域和时域的角度对路面不平度进行模拟，进而建立一系列车辆动力学模型，并以此作为车辆动载荷分析的基础。
First, road roughness is simulated in frequency and time domain, and some vehicle models are established for the study of vehicle dynamic load.
同时，洛·马公司还将执行这些卫星的载荷数据分析工作。
Lockheed Martin will also perform payload data analysis for these satellite missions.
由于模型和载荷的对称性，这里取CSP结构中包含一个焊盘的部分进行分析。
As the model and load symmetry here take CSP structure contains a pad part of the analysis.
在分析动载荷下的应力和变形时，除考虑横向剪切效应外，还须考虑微段的惯性力和阻尼力矩。
In the analysis of the stress and deformation under dynamic loading, the inertia force and damping moment should be considered in addition to the transverse shear effect.
在分析已有单桩静载荷试验资料及单桩竖向抗压极限承载力确定标准的基础上，本文提出了确定单桩承载力的一种建议方法。
A proposed method to determine the ultimate bearing capacity of pile is presented based on analyzing the data of loading tests and the related criterions for single pile.
设计工程师负责明确采用以下哪种数据作为标准管架的设计依据，即，分析设计，或额定载荷。
The design Engineer shall determine whether the design justification of the standard component support is to be by "design by Analysis" or by "Load Rating".
研究了梯度材料在承受热冲击载荷作用时的动态热应力响应分析模型问题。
The dynamic thermal stresses responses analysis model problems of metal-ceramic functionally graded materials (FGMs) under thermal shock load are studied.
提出了综合考虑动载荷和结构参数双重随机性的动力可靠度分析方法。
The method for dynamic reliability analysis, in which the randomicity of dynamic loads and structural parameters can be considered, is proposed.
水电机组在实际运行过程中所承受的各类动载荷是进行振动分析和动态设计的基础数据。
The dynamic load on powerhouse when operating is the basic data of dynamic design and vibration analysis.
根据分析结果判断，“载荷组”的允许载荷需要进行调整，以符合技术规范的特定要求。
Depending on results of the analyses the "load Group" allowable loadings may be modified to suit the specific requirements of the technical specification.
对软土地质条件下管桩静载荷试验异常原因进行研究分析，从设计和施工角度提出了合理建议。
In this article, the author analyzes the causes of abnormal static load test of pipe pile in soft soil stratum, puts forward reasonable advices from design and construction aspect.
分析表明，所提出的飞行载荷计算方法合理有效，计算结果合理可信。
The analysis presents that the introduced flight loads calculating method is reasonable and efficient and the result is believable.
而且该算法精确度高，抗随机噪声干扰能力强，使得载荷谱分析更加准确。
And it has a high precision, strong restraining random interfering noise. As a result, it makes loading-spectrum analysis more accurate.
对泵阀工作时的各种载荷进行了分析，建立了相应的力学模型。
Based on the analysis on all kinds of load while the pump valve is working, we establish the corresponding mechanical model.
分析结果可为风力机叶片载荷研究做参考。
The results of the analysis is a reference for wind turbine blade loads research.
分析中考虑了静载与波浪载荷的叠加。
In the analysis, the superposition of the static loads and wave loads are considered.
考虑脱层壳的三种不同屈曲模态，分析了边界条件、脱层长度、深度对脱层壳屈曲载荷的影响；
Three difference buckling modes of delaminated shell were considered. The influence of boundary condition, length and depth of delamination on buckling load was analyzed.
从以上分析可知，本诊断策略在不同的载荷下，不同的工况下都能较准确的诊断DPF堵塞故障，具有一定的适应性。
I can be seen from the above analysis, under different loads and different working conditions, this diagnosis strategy can accurately diagnose the blocking failure of DPF, and has due adaptability.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
结合冲击动力学理论，对该材料在高速冲击载荷作用下的响应特征进行了分析和讨论。
By the theory of dynamics, the impact response characteristics of the material is analyzed and discussed.
设计工程师负责对分析结果进行评审。按照标准载荷组载荷要求，对载荷进行调整的相关事宜，由管架集团工程总监作出最终决定。
Review of the results will be performed by a Design engineer and decisions regarding modification to standard load group loadings will be determined by the PSG Engineering Director.
给出了循环弯曲载荷下船体梁极限强度的简化分析方法。
A simplified analysis method for the ultimate strength of ship's hull girder under cyclic bending was proposed.
计算实例说明ANSYS的动力模块程序是计算波浪载荷，进行动力分析的有效工具。
The calculate result proves that the ANSYS program is an effective calculation tool for wave load and power analysis.
海洋环境载荷的分析计算是海上结构物强度保证的基础。
Analysis of the ocean environment loads is essential to ensuring the strength of offshore structures.
海洋环境载荷的分析计算是海上结构物强度保证的基础。
Analysis of the ocean environment loads is essential to ensuring the strength of offshore structures.
应用推荐