采用轴变形方法模拟机器鱼的运动。
The axial deformation method was used to simulate the motion of robot fish in this paper.
提出了一种无局部自交的轴变形的新算法。
This paper presents a novel axial deformation algorithm without local self-intersection.
意外的轴变形将造成严重的边缘载荷，将减少齿轮寿命，并产生噪音。
Unexpected deflections can cause severe edge loading that is detrimental to gear surface life as well as noise performance.
第三种情况是因为传动轴变形不平衡引起，一般这种情况出现在底盘碰撞过的车比较多。
The third case is due to the deformation of the transmission shaft caused by the imbalance, the general situation in the chassis collision over the car.
通过抑制特定基因，他们有系统地造成“形成多个口头波兰人(”户主“)…变形主体轴…和重叠的触角。”
By suppressing certain genes, they systematically caused "formation of multiple oral poles (" heads")... deformation of the main body axis... and duplication of tentacles."
拉尔夫·内德称科维尔是“一辆车的车祸”，因为它的摆动轴悬挂容易向下方变形，导致司机失去控制。
Ralph Nader dubbed the Corvair "the one-car accident" because its swing axle suspension had a tendency to tuck under, causing the driver to lose control.
通过研究基坑的变形，锚杆的受力状态和轴力的分布规律，来分析预应力锚杆柔性支护的力学性能。
The mechanics of its performance are studied by researching the deformation of excavation, the force of anchor and the distribution of axial force.
该法可以对在弯矩、剪力和轴力共同作用下的钢筋混凝土梁截面进行较为准确的荷载-变形反应全过程分析。
This method can be used to analyze accurately the complete load-deformation response of RC beams loaded in combined shear, moment, and axial load.
转动的泵轴会弯曲变形，产生最大挠度。
Rotational deformation of the shaft will produce maximum deflection.
当阀门水平放置运输时传动装置及传动部位应悬空，以防止传动轴受力过大变形损坏。
Transmission device and part should be hung up when the valve is in horizontal in order to prevent damage of axle.
当阀门运输时传动装置及传动部位应悬空，以防止传动轴受力过大变形损坏。
Transmission device and part should be hung up when the valve is transported in order to prevent damage of axle.
电冰箱金属冲压铰链的轴与铰链板就是通过铆压变形连接在一起的。
The refrigerator hinge axle and the hinge plate are linked by the riveting pressure.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
本文用红砂岩试件做了一系列的试验，探讨了在多轴压缩下红砂岩的强度和变形特征。
Systematic tests were conducted on specimens of red sandstone under polyaxial compression, and the strength and the deformation characteristics were carefully investigated.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
最后通过动力三轴试验仪研究冲击荷载作用下红粘土的力学和变形特性。
Finally use the dynamic three axle shear test to research impulsive load function under red clay mechanics and distortion characteristic.
根据材料的极限变形，导出管轴临界弯曲半径的计算方法。
According to the limit deformation, a method for calculation of the critical curvature of the tube is developed.
在单轴压缩变形破坏过程中，具有与普通岩石试件不同的四阶段性特征。
Moreover, the uniaxial compressive deformation and damage of thenardite are different from other rocks during four deformation phases.
针对单弧度弯曲大变形无裂纹轴校直问题，根据广义预测控制理论，建立了多步校直行程预测算法。
However to the large deformation shaft without crack, general predictive theory has been applied to built up the multi-steps straightening stroke predictive algorithm.
通过埋设测试元件对承台土反力、桩身轴力及复合地基变形等进行了量测。
The pressure under cap, axis force along pile and deformation of foundation were obtained from these tests.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
在滚压加工工艺中，滚压套的压下量大小决定了滚压力的大小并决定了细长轴表面发生弹塑性变形的状况，从而决定了细长轴的加工质量。
In the process of rolling, the movement of rolling sets decide the rolling pressure, the deformation of the spindly shaft and consequently the rolling quality.
结果表明由于平台变形使主惯性轴方向变化从而使气浮台姿态准确度产生误差。
The result shows that the deformation of platform makes the change on the direction of inertia principal axes which results in an error on the attitude precision.
本课题针对在KX3132G型六轴数控滚齿机床加工过程中，工作台热致变形产生的X轴方向上的误差进行测量与补偿。
This subject is about thermal deformation error detection and compensation of an YKX3132G six axes CNC gear-hobber machine's worktable in X axis direction.
本文首先建立楔形梁包含轴力和剪切变形效应的平衡微分方程。
In this paper, the equilibrium differential equation including the effects of constant axial force and shear deformation was established for tapered beams.
分析了不可压缩刚粘塑性圆轴扭转和拉伸的组合变形。
The combined deformation due to torsion and tension of incompressible rigid viscoplastic circular shafts is analyzed.
目前在材料力学实验中的圆轴扭转大变形问题尚未解决。
During the experiment on mechanics of materials, a problem of solid circular shaft in torsion testing for large deformation remains unsolved.
通过计算机数值模拟分析研究了锚杆支护回采巷道围岩应力分布、围岩变形、锚杆轴力及顶板离层规律。
By computer simulation, we analysis and study the law of wall rock stress distribution, deformation, the axial force of bolt and the roof-off-strata.
研究结果表明，对糯扎渡心墙砾石土料，由室内三轴试验和现场载荷试验得到的变形特性基本一致。
The study result indicates that the deformation properties of core clay from the triaxial tests are well agreed with those from the field loading tests.
在真三轴应力状态下进行了各种应力途径的岩石变形和破坏实验。
The rock deformation and failure tests are performed along various stress paths under true triaxial stress state.
应用推荐