用该方法对实验环境照度下捕捉的图像和红外光源辅助照明的图像进行了分析，并与主动轮廓线方法对比。
The proposed method is applied to the visible-light image and IR-illuminated image in the experimental condition, and contrasted with a method based on active contour.
利用这一规律和作图方法，可以解决任意位置的非退变二阶曲面的投影轮廓线的作图问题。
By using the role and the drafting methods, projective contour line of a quadric at random position can be drawn.
该文针对复杂背景的彩色图像，提出并实现了一种图像封闭轮廓线提取的方法。
This paper has deep ly researched image segmentation. Aiming at the color image with complicated background, a novel method of close contour line extraction is presented.
方法CT图像处理、截面轮廓线信息处理、数字有限元分析。
Methods ct imagine processing, contour lines of cross-sections information processing, numerical finite element analyses.
提出了双作用式平行分度凸轮机构，并按研究齿轮啮合的方法研究其凸轮廓线。
This paper proposes double action parallel indexing CAM mechanism, and studies cams profile by methods used in gear meshing.
进一步讨论了采用CAD动画的方法，高速高精度地计算凸轮廓线曲率半径的过程。
Then the process for computing the radius of curvature of planar cam profile is introduced by means of CAD animation.
本文提出了一种直接提取眼图轮廓线的新方法来快速估计高速串行链路中的数据相关性抖动。
To estimate data dependent jitter(DDJ)in high speed serial links, a new method is proposed for extracting contour of eye diagram directly.
在人眼视觉机理的基础上，提出光斑扩散方法，用来探测图像中各个纤维截面并得到其轮廓线。
Based on mechanism of human sight, the facula diffusion method is advanced to detect individual cross-sections in the image and takes out the contours of them.
论文讨论和比较了几种插值方法，引入傅立叶描述子对轮廓线进行插值；
Several interpolation methods are discussed and compared, and Fourier description is introduced as a interpolations.
该方法不仅能获得汉字字形的轮廓线，还能平滑地放大汉字字形轮廓。
The contour line of Chinese character can not only be attained, but also be magnified smoothly in this way.
本文利用复数表示法，得出从动转子中心作平面一般运动情况下的凸轮廓线的设计方法。
With the help of complex number operation, the author has developed a method for designing the contour of a CAM whose follower keeps a general plane motion.
并讨论了亚音速段和超音速段最佳轮廓线的确定方法。
Furthermore we discussed the method of defining the optimal contour in the supersonic and subsonic regions.
传统的基于轮廓线三维重建方法中，直接采用由序列轮廓线生成的平面三角片拟合曲面，重建的效果和表达的信息均有限。
In traditional method, flat triangles produced by listed contour data are used directly to fit the surface in which the reconstructed effect and the expressive information are limited.
主动轮廓线模型引入高层知识，在处理局部间断的边缘时，具有优于传统轮廓提取方法的提取效果。
With the introduction of high level information, Snake model has more satisfactory effects than what gained by the traditional method when dealing with disconnected edges in the image.
最后用改进的水平集方法对初始轮廓线进行演化而得到最终结果。
At last, the initial contour lines are evolved using improved level set method to achieve object boundaries.
方法：设计A-T形推进皮瓣来修复位于面部自然轮廓线周围的创面。
Methods We designed that A-T advanced skin flap to repair the wound near nature contour line on face.
为了改进主动轮廓线模型求解过程中轮廓线初始位置的敏感性，通常要采用一些方法扩大图像力的作用域。
To improve the active contour model's sensitivity to its initial position, some methods must be applied to widen the image force scope.
提出了直纹面叶轮叶片非等距轮廓线的生成方法。
It introduces a new kind of generating method of non-equidistant curves.
本文先用少量粒子勾勒火焰的外轮廓线，再用纹理绘制的方法填充火焰纹理。
This paper USES particle to draw outline of the fire and fill the fire body with texture taken from realistic fire video.
按本文的方法设计特殊速比函数，可使与主动滚子啮合的从动凸轮廓线不会产生曲率干涉。
The special speed-ratio function designed in this paper can make driven cam profile that meshing with driving roller no curvature interference.
运用相关函数法研究了凸轮廓线误差对凸轮机构从动件动力精度的影响，并给出了动力精度的求解方法。
The influence of errors of cam profiles on the dynamic accuracy of cam mechanism is studied using the correlation function method, and a calculation means of dynamic accuracy is given.
实验结果证明，AEP算法能标记出一幅图中不同的目标，K主曲线能提供精确的目标轮廓线，该分割方法行之有效。
Experimental results prove that the AEP algorithm can label the distinct objects in the image and that K principal curves can provide accurate contours. The method is very effectual.
在人脸任意位置下，利用PCA自动确定人脸纵方向，采用网格配准方法提取对称面和对称轮廓线；
The vertical direction of face is determined by the PCA at the random pose. Based on surface registration, the symmetrical surface and symmetrical profile are extracted.
提出了一种新的目标轮廓特征级融合方法，求解两类模式图像的收敛动态轮廓线控制点向量差的范数平方极小化。
A new feature level fusion method of target's contour was proposed, which minimizes norm's square of the difference of control point vectors of convergent dynamic contours in two modal images.
研究中采用了基于侧影轮廓线的重建方法。
We take the the silhouette-based as the main reconstruction algorithm.
本文提出一种实用的凸轮廓线动态设计方法。
The paper Outlines a practical dynamic design method for CAM profiles.
传统的方法直接采用由序列轮廓线生成的三角片来拟合曲面，重建的效果和表达的信息均有限。
Flat triangles produced by listed contour data are used directly to fit the surface in traditional method, in which the reconstructed effect and the conveyed information are finite.
利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
利用坐标变换的方法得到的凸轮轮廓线可为凸轮机构的动力学仿真和数控加工编程提供依据。
The cam contour curve was obtained through coordinate transformation method. It offers references for dynamic simulation and the programming of numerical-control machining for cam mechanism.
应用推荐