适用于滑动部件和密封件，但不适合负荷轴承。
Used for sliding parts and seals but not load-carrying bearings.
有时轴承组件需要调试。在冬季，电线上水分含量很高会结冰，这给电线增加了几十倍的负荷。
Sometimes bearing assemblies need adapting. In winter, when moisture on wires is high, ice may form on them, which increases the load for dozens of times.
单列角接触球轴承可承受径向，轴向或复合负荷，不过，任何轴向负载必须在一个方向。
Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.
本方法是利用了一些无因次参数及综合参数，使轴承负荷同柴油机工作过程及结构的某些参数联系起来。
This method utilizes some of non-dimensional parameters and combined parameters, in order to interrelate the bearing load with parameters of working process and structure of a diesel engine.
输送皂角泵内有设计合理的泄油和回油槽，是齿轮在工作中承受的扭矩力最小，因此轴承负荷小，磨损小，泵效率高。
Pump is the drainage and back into the groove of reasonable design, is a gear in the work under the minimum torque force, so the bearing load is small, wear small, pump with high efficiency.
在背靠背的安排是特别好时，轴承之间的距离很短，目前负荷得到应用。
The back-to-back arrangement is especially good when the distance between bearings is short and moment loads are applied.
当有轴向负荷时，应和其他轴承组合使用，它不限。
When the shaft has axial load, it can be used in combination with other bearings.
适用于重负荷或振动工况下操作的中速或低速轴承。
For medium and slow speed bearings operating under heavy load or shock-loading conditions.
大多数轴承都支承径向或轴向负荷的转轴。
Most bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
径向负荷的重量是多少轴垂直放在上面。三轮车坐在一个地方对轴承的轴向负荷。下图是一个径向轴承截面的看法。
Radial loading is the amount of weight placed vertically above the axle. Sitting on a trike places an axial load on the bearings. The drawing below is a cross-sectional view of a radial bearing.
负载锁定春季阻止自由的球轴承是从螺母丢失下降负荷。
Load locking spring prevents load from free falling in the event the ball bearings are lost from the nut.
双向压力球轴承有安装于轴上的中间圈和两个外圈，在中间圈与外圈之间分别加有钢球，能够承受双向轴向负荷。
Two-way pressure has mounted on ball bearings between the shaft and two outer rings, in the middle ring and outer ring were added between the steel ball, able to withstand the two-way axial load.
由于对旋轴流式风机电动机轴承要承受较大的轴向负荷和径向负荷，实际使用过程中常发生电动机轴承损坏的现象。
Due to the strong axial and radial load to the bearing of electromotor in counter-rotating axial fan, it is always occurred that the bearing was damaged in use.
为了承受高负荷，如在实际情况下，固体铸铁轴承端盖投入使用。
In order to withstand high loads, as is found in practical circumstances, solid cast iron bearing end shields come into use.
在平面有限元计算中，必须把轴承负荷转为节点力。
It is known that in plane finite element calculation the bearing load must be transformed into force of nodal.
这些轴承有特别高的轴向负荷能力，主要用作轧钢机里的推力轴承。
These bearings have a particularly high axial load carrying capacity and are used primarily as thrust bearings in rolling mill applications.
由于各种机械有着不同的工作条件，对滚动轴承在负荷能力、结构和使用性能等方面都提出了各种不同要求。
As machinery has a different working conditions, the load bearing capacity, structure and performance in such aspects as proposed by a variety of different requirements.
浪形的两部分由铆钉固定，用于高负荷运行的轴承。
Two wave-shaped in part by the rivets, bearings for high load operation.
有两列滚动体的双向推力滚动轴承，每列只在一个方向承受轴向负荷。
There are two bi-directional thrust bearing rolling bodies, each listed in only one direction of axial load.
为此，本文作者在研究了有关文献后，提出了单列式柴油机轴承负荷快速估算法。
For this account, the author provides a simplified method for estimating the bearing load of a single row diesel engine.
假设柔性轴承的寿命符合韦布尔分布，应用赫兹弹性接触理论和滚动轴承额定动负荷理论进行柔性轴承的寿命分析。
Hertz contact theory and dynamic load rating theory are used to study flexible bearing life assuming that the life is coincident with Weibull distribution.
应根据负荷灵敏度矩阵通过综合调整各轴承处的标高达到负荷在各轴承间合理分布的目的。
The reasonable distribution of multi-support rotor bearing loads can be achieved by adjusting the elevation of all bearings based on the load sensitivity matrix.
这就减少了发动机轴承上的惯性负荷，使发动机反应更加灵敏。
This reduces the inertia load on the engine bearings and, in addition, makes for a more responsive engine.
由于其接触角，单列角接触球轴承比深沟球轴承更适合维持高轴向负荷。
Due to their contact Angle, single-row angular contact ball bearings are better suited to sustaining high axial loads than deep-groove ball bearings.
该类轴承主要用以承受径向负荷，也可承受一定的轴向负荷。
This class will be mainly used for withstanding radial bearing load, can withstand certain axial loads.
如实际负荷为径向和轴向复合负荷，则必须计算当量轴承静负荷。
If the actual load is a combined radial and axial load, then an equivalent static bearing load must be calculated.
通过计算承受联合载荷的圆锥滚子轴承负荷分布，分析了在不同偏斜状况下圆锥滚子及滚道受力的变化趋势，总结出偏斜对圆锥滚子轴承受力的影响。
Calculates the load distribution in a tapered roller bearing under combined loads, and analyzes the effect of misalignment on the loads in a tapered roller and raceways.
而关于预负荷空心圆柱滚动体轴承的研究更是少之又少，到目前为止，在国内的期刊和杂志上还没有发现关于这方面的研究论文。
The researches on the preloaded hollow cylindrical roller bearing are much less, no research paper is found about this aspect in the magazine at home by now.
轴承负荷及曲轴疲劳强度的计算均按简支梁进行。
The bearing loads and crankshaft fatigue strength are calculated according to the principle of a simple beam.
最后，又对预负荷空心圆柱滚动体轴承的刚度进行了研究。
At last, the rigidity of the preloaded hollow cylindrical roller bearing is researched.
应用推荐