在实际应用中，调整功率谱密度函数以适应各类场地土仍是一项困难的工作。
In practical application, one of the difficulties is the adjustment of the power spectral density function to various soil conditions.
路灯单元控制系统采用恒流源供电，具有输出功率调整功能，并能定时调整功率。
The control system of street light unit USES the constant current to supply, has the function of establish and timing adjustment output.
而通过前端控制面板上的自动烹调功能则可以自动调整功率等级，计算烹饪和加热的时间。
The auto cook feature, accessible on the front control panel adjusts power levels and calculates cooking and reheating times automatically.
通常，德州仪器畅销的模拟芯片，这适用于电话和其它电子设备调整功率，转变声音成为电脉冲。
As usual, TI's best sellers were analog chips, which are used in phones and other electronics to regulate power and convert sound into electric pulses.
切换电路接收第三讯号并依据一参考电压，以控制切换讯号的脉波宽度，所以可调整功率转换器的输出电流。
Receiving the third signal and based on a reference voltage, the switching circuit controls the pulse wave width of the switching signal so as to adjust output current of the power converter.
不过，它的总体造型不错，而且经过一些细微的调整和功率升级，所以这是一辆值得开的好车。
Still, the overall shape looks good, and with a mild drop and a power upgrade, this could be a fun car to drive.
于是，这就有可能控制一个质量阻尼器的移动或相对地利用低功率来调整建筑物结构的硬度。
It is thus possible to control the movement of a mass damper or adjust the stiffness of a building's structure using relatively little power.
用户可根据性能参数、检测要求，设定调整放电功率。
Users can set adjustable discharge power according to capability parameter and test request.
把INDUCTOR调整到和反射功率有最小的偏差。
Adjust the INDUCTOR control for lowest deflection on the reflected power.
控制部件(12)根据当前的发射功率来确定调整过的发射功率。
The control unit (12) determines the aligned transmit power based on the current transmit power.
在各预想故障下不断调整送电区和受电区之间的电力输出，使两区域间的功率差不断增加，直到某一设备或系统达到它的极限值。
Under various faults, the transfer power between the feeding region and the accepting region is increased continually, until the limitation of some device or system is reached.
输入功率过大，调整接收天线。
提出了一种基于功率估计的门限调整技术。
This paper proposes threshold adjusting technology based on estimation of power.
这些方法经实际应用的检验，被证实是可行的，对功率因数自动补偿设备的设计、调整有一定的指导意义。
These methods have been proved to be feasible by the tests of practical USES, and they have certain guiding significance for the design and adjustment of power factor automatic compensate equipments.
光束自动准直系统应用于大型高功率激光装置的多路光束的精密准直调整。
The laser beams automatic alignment system is applied to adjust multiple beam paths accurately in the high power laser facilities.
结论：巩膜瓣可调整缝线的应用可有效地调节眼压，大大减少术后浅前房发生率，提高手术成功率。
CONCLUSION: Releasable sclera flap sutures can effectively accommodate IOP, reduce the occurrence of postoperative shallow anterior chamber and improve surgical successful rate.
超声功率与超声频率可根据需要调整。
Ultrasonic power ultrasonic frequency may adjust according to the needs.
超声功率与超声频率可根据需要调整。
Ultrasonic power and ultrasonic frequency may adjust according to the needs.
条件允许实时读数的电压，电流，功率和故障，并实时改变设定点调整的权力，工艺要求。
Allows for real-time readings of voltage, current, power and fault conditions, and for real-time changes to the set point that adjusts power to process requirements.
调整了直流输出电压可调节范围、效率与功率因数、宽频杂音电压、稳压精度等指标。
It adjusts some technical parameters, such as the output DC voltage adjustable range, efficiency and power factor, wide band noise voltage, static regulation value.
增益控制机构允许对输出发射功率电平的精确调整。
A gain control mechanism allows for accurate adjustment of the output transmit power level.
利用蓝宝石单晶光纤温度计测温，通过调整模糊PID控制器参数控制微波辐射输出功率实现温度的精确控制。
With the output power of microwave irradiation controlled by Fuzzy-PID controller, the temperature, measured by sapphire single crystal optical fiber temperature sensor, was controlled very precision.
SOC估计和功率强度估计相结合，实现了在功率强度估计的同时对SOC估计提供自调整机制。
By the integration of estimation of SOC combined with power capability, power capability is estimated and the self adjustment mechanism is provided simultaneously.
由于粉末棒密度不均匀，生长过程中又有气泡产生，CO2光源的功率必须严格控制，并随时调整以适应单晶光纤的生长。
The power of CO2 laser is critical due to the non-uniform density and the air bubble in it. It must be strictly controlled.
比特交换和功率调整算法可以作为带宽优化算法的重要组成部分，应用于电力线高速数据通信之中。
The bit swap and power reallocation algorithm can be an important part of dynamic spectrum optimizations of high speed power-line communications.
对于两路电源供电给同一用户的情况，目前现场通用的功率因数调整电费有两种计算方法。
In the case of double-source supply to a consumer, there are two kinds of currently prevalent calculation method for tariff regulation by power factors at site.
自动发电控制(agc)是调整电网频率与有功功率、保证电网安全、经济运行的重要措施之一。
Automatic generation control (AGC) is one of the important measures to regulate the frequency and active power of power grid and ensure its security and economic operation.
自动发电控制(agc)是调整电网频率与有功功率、保证电网安全、经济运行的重要措施之一。
Automatic generation control (AGC) is one of the important measures to regulate the frequency and active power of power grid and ensure its security and economic operation.
应用推荐