为保证测量精度，应对非线性误差进行校正。
To ensure accuracy, the nonlinear error should be calibrated.
结合局部标定法，对摄象机光学系统的畸变误差进行校正。
Combining with local calibration, the distortion error of the optical system in the camera is corrected.
本文介绍了在化探编图中，对数据系统误差进行校正的一种方法。
A correction method of systematic errors of data for geochemical map compilation is introduced in this paper.
在IPPP帧结构中，转换编码结构需要对显著的色差漂移误差进行校正。
In the case of IPPP frame structure, the obvious chroma drift errors had been corrected in our transcoding architecture.
为减少检测系统的测量误差，在自动检测系统中需要对非线性误差进行校正。
In order to reduce the measuring error of automatic detection systems, it is needed to adjust the nonlinear error for automatic detection systems.
基于特征值分解的DOA估计算法对信号的相位误差非常敏感，因此有必要对阵元位置误差进行校正。
DOA estimation algorithm based on eigenvalue decomposition is very sensitive to phase error of array signal.
为了提高测量的精度，通过对角速度传感器零位和灵敏度的误差进行校正，可得到更为精确的目标运动角速度。
To improve the survey precision, we revise the null position and sensitivity errors through the linear operation, and more accurate target angular velocity results could be got.
根据该误差对校正结果进行修正以抑制投影噪声的放大。
According to the errors, the correction results are revised to suppress the projection noise enlargement.
将这些误差进行分离，可以指导仪器的的校正；
Separate these errors, the instrument can be revised properly.
对由于纤维在高浓度氢氧化钠溶液中的部分溶解而引起的小量误差进行了校正。
The slight error resulting from the partial solubility of the fibre in sodium hydroxide of higher concentrations is corrected.
为了减小误差在不同扫描行之间的传播，利用透射数据对重建结果进行校正。
For reducing the error propagations among scanning lines, the transmission data are used for rectifying the scattering reconstruction.
从弹塑性理论出发以圆截面轴为例对校正应力与残余变形进行了分析研究，提出了在给定弯曲误差下的校正载荷的计算公式。
The paper has studied straightening stress and residual deformation of circular shaft by using elastic - plastic theory, deueloped calculation formula of straightening loud in given deflection error.
借助于先进的激光测量技术，可对天线近场测量系统的定位误差进行精确测量并加以校正。
The positioning error of the antenna near field measurement system can be exactly measured and corrected by using the advanced laser measurement technology.
将来自不同国家的数据源进行数据转换、投影变换和误差校正，转换为统一的数据格式和投影坐标系统。
The data from the data sources of different countries are converted into the unifying data format and projection coordinates system by data conversion, projection conversion and error correction.
文中基于准三维模型对惯导系统误差校正的思想，利用摄像机成像系统和捷联惯导系统（SINS）相结合的方法，着重对量测矩阵进行推导。
Based on the INS error correction by quasi-three dimensional model, the method of the combination of camera imaging system with SINS to deduce the measurement matrix was utilized.
本文对阵列加权反演口径幅相分布的方法所引起的误差进行了分析，并提出校正方法。
The analysis and correction of the errors on the method of reconstructing aperture distribution by using array weighting are given in this paper.
本文分析了不同情况下流压偏差的曲线形态差异，并进行了准确的校正，降低了解释误差。
Therefore, the paper analyzes the curve pattern of different deviation and carries on correcting accurately, lowing error of analysis approach.
当阵列模型存在误差时，子空间类方法的高分辨性能会显著下降，因此必须进行有效的校正。
A novel vector sensors array calibration method based on subspace approaches in the presence of phase errors on high-resolution estimation methods is presented in this paper.
图像和视频的采集过程中有许多可能会造成错误或者误差，我们需要进行校正。
Image and video collection in the course of many may be wrong or error, we need a correction.
对所有多聚体分子间相互作用能的计算，进行基组叠加误差（BSSE）和零点能（ZPE）校正都是必要的。
The basis set superposition error (BSSE) and zero point energies (ZPE) corrections are absolutely necessary for the interaction energies of the clusters.
利用误差网络参数，对被测网络的输入反射系数进行误差的自动校正，提高了测量线测试系统的测量精度。
With the error network parameters, the real network's input reflecting coefficient is revised and the measurement precision of measuring line system is improved.
在对网络分析仪的测量误差来源进行分析的基础上，介绍了误差的主要校准方法，同时给出了二端口校正的误差模型。
Based on analyzing the sources of measurement errors, the correction methods of the errors are introduced and error models of two port calibration are provided.
根据现场环境用单片机实现了硬件和软件设计，并对系统的误差进行了分析和校正。
Hardware and software are designed using SCM according condition of local in this paper. And errors of this system are analyzed and revised.
本文详细介绍了亚洲陆海大地貌图在计算机编制过程中的误差校正问题和所采用的有效进行误差校正的方法与具体实施过程。
The paper introduces the error correction during computer aided compiling with Terra and sea relief map of Asia. some efficient methods of error correcting and detail applied process.
解离能计算进行了零点振动能(ZPVE)校正，并运用完全均衡校正法对基函数重叠误差(BSSE)进行校正。
For dissociation energy, zero point vibration energy (ZPVE) is calculated and basis set superposition error (BSSE) is corrected by counterpoise method.
本文提出了可进行条纹非均匀性校正的最小均方误差法(MMSE)。
We develop the minimum mean square error (MMSE) method for stripe nonuniformity correction (NUC).
在各基组下均进行基组叠加误差(BSSE)和零点能(ZPE)校正求得结合能。
All the binding energies have been corrected by the basis set superposition error (BSSE) and zero point energies (ZPE).
本文在综合分析现有测量数据校正技术研究进展的基础上，对整合数据校正的过失误差侦破策略进行了研究。
On the basis of analyzing the present method of data reconciliation, a strategy which combined the data reconciliation method with the gross error detection is studied.
对LED显示屏进行一致性校正，由于量化误差及视觉函数修正的影响，会产生相应的误差。
It will have the corresponding error on the uniformity correction to the LED display monitor for the influence of quantized error and the visual function.
对LED显示屏进行一致性校正，由于量化误差及视觉函数修正的影响，会产生相应的误差。
It will have the corresponding error on the uniformity correction to the LED display monitor for the influence of quantized error and the visual function.
应用推荐