分析了整位误差对波特率误差的影响。
The effect of full bit error on the baud rate is also analysed.
认为这种误差的影响很小，实际上可忽略不计。
The effect of the centring errors is usually very small and can be neglected.
其对PSD四个角位置附近定位误差的影响最大。
The positioning errors at the four corners of the PSDs are affected most.
一个滑模控制项用于消除神经网络逼近误差的影响。
A sliding model control term is used to compensate for the effects of approximation errors.
特别分析了边界误差的影响，并构造了一些新的算法。
Specially, the effect of boundary error is analysed, and some new algorithms are constructed.
同时也分析了这一数据处理过程对贯通横向误差的影响。
The influence on lateral error of transfixion in the data process are studied and analyzed in this paper.
在这个增量形式的虚功方程中，考虑了积累误差的影响。
The effect of truncation errors is considered in the incremental virtual work equation.
此外，还分析数控模型以及回摆间隙角对加工误差的影响。
Besides, the influence of the machining error by the nc model and the clearance Angle of the sway back are analyzed.
首先给出了阈值选取对质心探测系统误差和随机误差的影响。
The influence of threshold selection on the centroid system errors and random errors is discussed.
研究雾状流条件下，离散液相对涡街流量计测量误差的影响。
The measuring error of vortex street flowmeter was investigated in condition of mist flow.
结果表明该方法能有效抑制测量误差的影响，提高识别与平衡精度。
The experiment results show that this method can decrease the influence of measurement error on identifying precision and improve balance precision.
分析了如何划分子测绘带以便分别处理，以抑制高阶相位误差的影响。
The principle of determining the width of sub-swath is discussed to suppress the high order phase error.
分析了多边形效应对同步带直线传动移动误差的影响，得出误差计算的表达式。
The influence of polygon effect on the displacement error of timing belt linear transmission was analyzed, and an error expression was obtained.
对各种误差的影响性质和大小做了全面的分析，细致地讨论了仪器常数的内容。
Discussion is also made on the property and magnitude of various errors as well as the implication of instrumental constants.
近壁对总压测量影响不大。速度梯度和近壁对测量误差的影响还与来流方向有关。
The effects of the velocity gradient and wall-proximity on the measuring errors are related to the flow direction.
并通过引入最优逼近误差的自适应补偿项来消除建模误差和参数估计误差的影响。
The adaptive compensation term of the optimal approximation error is adopted to minimize the influence of the modeling error and the parameter estimation error.
然而，MVB算法的主要问题在于不具有鲁棒性，不能克服未知导向矢量误差的影响。
However, the major problem of the MVB is that it lacks robustness when there are unknown array steering vector errors.
从现代数理统计的角度，对这种随机误差的影响进行较深入的分析，得出了有益的结论。
This paper makes thorough analyses for the effects of the random errors with modern statistics and achieves useful conclusions.
结果表明，装药量在其正常范围内波动时，装药量的变化对初速或然误差的影响并不显著。
Results show that the effect of charge weight variation on the muzzle velocity probable error is not significant when the variation is within normal range.
研究了光纤电压传感器光路系统中光源、光纤、电光晶体和光电探测器对测量误差的影响。
The errors caused by light source, optical fiber, electro optic crystal and opto electric detector in optical fiber voltage transducer are presented.
分析了GPS卫星星历误差的影响特征与规律，提出了广播星历误差影响诊断与预测模型。
This paper analyzed the characters and rule of the satellite ephemeris error. It proposes the Model of the diagnosis and Forecast for the GPS broadcasting ephemeris error.
首先分析了数字化数据中各种误差的影响性质及其控制方法，指出现有研究方法中存在的问题。
First, the influence property of different kinds of errors in digitalized data and the methods of controlling them are discussed. Some problems on the present methods are also studied.
对回归方程误差的影响因素进行了分析，导出了回归方程的均方误差与其影响因素之间的关系式。
The influencing factors for errors in regression equation are discussed and the relations between mean square error of regression equation and its influence factors are deduced.
所以利用系统跟踪误差构造线性最优补偿器，该补偿器用于减少逼近误差对系统跟踪误差的影响。
So a compensator is constructed, which is compensates the approximation error's effect on system output at the condition of the approximation error thought as disturbance of the system.
本文结合内耗机理及部分实践提出了钢弹性体材料处理、热处理工艺对传感器滞后误差的影响分析。
This text analysed the influence of steel elastomer material, heat treatment craft to load cell lag error combining internal friction mechanism and practical experience.
然而，对于由机械加工获得的金属机械零件，必须考虑零件内存在的残余应力对热变形误差的影响。
However, for the metal mechanical parts which are processed by mechanical method, the influence of its inner residual stress on the thermal deformation error should be considered.
将柔性坐标系引入经纬仪工业测量中，使其系统自定位不再受仪器整平误差和相对定向误差的影响。
Flexible coordinate system is introduced into theodolite industrial measurement, so there arent errors of instruments levelling and relative orientation in self locating of the system.
由于测量过程中，测得的数据不可避免要受到各种随机测量误差的影响，影响到测量结果的准确性。
During the measure course, the measure data will be affected unavoidably by all kinds of error, and the veracity of measure result will be affected.
给出了运动估计的置信度度量，并将其引入到图像恢复算法中，进一步克服了运动估计误差的影响。
The algorithm also provides a reliability measure of the estimated result, which was introduced into the super-resolution image reconstruction to overcome the influence of the estimation error.
给出了运动估计的置信度度量，并将其引入到图像恢复算法中，进一步克服了运动估计误差的影响。
The algorithm also provides a reliability measure of the estimated result, which was introduced into the super-resolution image reconstruction to overcome the influence of the estimation error.
应用推荐