橡皮条被拉紧以试验强度。
根据模型得到的计算强度与试验强度拟合的非常好，相关系数非常高。
According to calculation strength that model receive being with test strength fit very well, the coefficient correlation is very high.
飞行试验具有试验强度高，测试参数多，测试、处理、监控与显示实时性高，试飞风险大，技术要求高等特点。
The flight test has the characteristics of high test intensity, masses of parameters, high realtime performance requirement for testing, processing, monitoring and displaying, and high risk etc.
分析了电子引伸计应变测量误差形成的主要原因，以及对金属材料拉伸试验强度测试的影响，介绍了引伸计使用中的一些经验和注意事项。
The main cause of error of strain measurement using electronic extensometer and its effects on the strength measurement in tensile tests of metallic materials was analyzed.
静力测试提供了一种检测飞机机体结构破坏模式以及静强度的试验方法。
Static trials represent an experimental test method of defected mode and static strength of a plane construction.
电气强度试验是电气安全性能测试标准所要求的第三项测试。
The Dielectric Withstand test is the third test required by the electrical safety testing standards.
电气强度试验包括在测试过程火线和地线同时短路的情况下测量被测设备的漏电量。
The Dielectric Withstand test consists in measuring the current leak of a device under test, while phase and neutral are short circuited together.
在试验中，罗盘探测到的磁场强度范围从低于地球磁场的0.1高斯到高于一小块磁铁的200高斯。
In the experiment, the compass detected magnetic fields with a strength between 0.1 gauss, which is less than the Earth's magnetic field, and 200 gauss, which is stronger than a small iron magnet.
由保险公司提供资金的安全研究小组“公路安全保险协会”(Insurance Institutefor Highway Safety)公布了2010年评级最高的轿车和越野车，今年还增加了一项翻车时车顶强度试验。
The Insurance Institute for Highway safety, a car-safety research group funded by insurers, announced its highest-rated cars and SUVs for 2010, having added a rollover roof-strength test this year.
在最近的一次小试验中，马洛尼考虑到接受低强度激光疗法的19位患者的胆固醇和甘油三脂浓度。
In one recent small trial, Maloney looked at the cholesterol and triglyceride levels in 19patients undergoing LLLT.
织物传送带。全厚度拉伸试验。第1部分：拉伸强度、断裂伸长率和标准负荷下伸长率的测定。
Textile conveyor belts - Full thickness tensile testing - Part 1: determination of tensile strength, elongation at break and elongation at the reference load.
电介质强度试验是在每对导体（包括地）之间和每个导体与包装了金属薄片的尾档之间测量。
The Dielectric Strength Test is to be performed between each pair of conductors (including ground if applicable) and between each conductor and the foil wrapped cord guard.
本文在黄土已有研究成果的基础上，通过三轴剪切试验对类黄土(黄土状土)的强度软化特性进行了重点研究。
This paper mainly studies the strength softening characteristic of loess-like soil by triaxial shear test on the basis of primary research productions of loess.
掺高效减水剂的混凝土采用蒸汽养护时，混凝土应具有必要的结构强度才能升温，蒸养制度应通过试验确定。
Mixed efficient jianshuiji USES steam curing of concrete, concrete should have the necessary structure strength to warming, steaming raise system should be determined by test.
叙述了热轧钛钢板的强度和冲压成形性能的试验结果，介绍了钛钢板在汽车生产中的应用。
This paper describes the experimental results of the strength and stamping forming property of the hot rolled titanium steel plates, and presents their application in automotive production.
试验表明，环氧灌浆料具有较高的粘结强度，而且固化时间短，尤其能在潮湿界面中使用。
The experiment shows that the epoxy grouting material has binding strength more powerful and solidified time shorter, and can be especially used in the moist surface.
首先进行强度和稳定性计算，主要进行了筒体、端盖的壁厚计算、水压试验应力校核以及叶轮、轴的强度校核。
First of all, for strength and stability, mainly a cylinder, cover the wall, the water pressure check and impeller stress test, the axis of strength checking.
根据试验结果，确定适合加工该型号高强度钢的刀具材料和切削用量。
Based on the results of experiment, the suitable tool material and machining parameters are confirmed.
随着最大试验荷载的增加，更新的粘结强度均值逐渐增大，但更新的变异系数逐渐减小。
With the increase of test loads, the updated mean bond stress increases, but the updated coefficient of variation decreases.
用于检测金属线材的抗拉强度，及弯曲试验。
For testing the tensile strength and flexure strength of wire.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
载荷和抗冲击强度试验，发现这种井盖的载荷力为24吨，抗冲击强度也超过了普通井盖。
Load and impact strength test, found that this covers the load of 24 tons, the impact strength is higher than that of conventional manhole cover.
介绍了稳态强度理论的基本概念、稳态强度的固结不排水剪切试验方法及试验结果；
The steady state strength concepts, the consolidated-undrained triaxial shear test method and the test results are introduced.
通过室内试验，用强度，渗透性和抗水解性来表征该材料的效果。
Through the laboratory test, with strength, permeability and resistance to characterize the hydrolysis of materials.
本文对偏高岭土以及替代传统掺合料对混凝土强度的影响进行了试验研究。
In this paper, the impact of metakaolin as well as alternative to traditional metakaolin admixture on concrete strength is studied.
该文根据试验结果，得出了高性能混凝土强度和水胶比、混合材料掺量之间的关系。
Based on experiments, this paper puts forward the relationship of the strength of high performance concrete to the ratio of water-binder, the amount of admixture.
试验结果表明，发动机在高、低速区的最佳进气涡流强度是不同的。
Results show that there are different optimum swirls in different ranges of diesel engine operating condition.
通常由实验室的试验得到材料的强度。
The strength of material is usually obtained by laboratory tests.
试件截面受拉偏心是混凝土均匀受拉强度试验中存在的主要问题。
Tension eccentricity of the specimen section is the main problem in concrete homogenous tensile strength test.
本文通过试验与工程实践，介绍采用碎（砂）石桩及低强度混凝土桩组合构成复合地基的试验成果、计算方法及应用检测成果。
This paper introduces the test results and calculative method by using the composite foundation of sand-stone pile and concrete pile with low strength.
应用推荐