文中运用工程设计计算法，针对该特殊结构的容器进行了设计计算。
Design calculation has been made for this kind of special structure vessel with engineering design calculation method.
执行算法是很无聊的，但设计算法很有趣，是智力上的一种挑战，也是计算机科学的核心部分。
Executing algorithms is boring, but designing them is interesting, intellectually challenging, and a central part of computer science.
提出一种评价数据链路系统性能的目标函数，设计了数据链路系统的优化设计算法，并给出其优化结果。
The objective function for evaluating the data link system is proposed, and then the system optimization algorithm and optimal results are presented.
给出了最优控制律的存在唯一性条件，并提出了最优控制律的设计算法。
The conditions of existence and uniqueness of the optimal control law is given and an algorithm of solving the optimal control law is proposed.
文章在研究FIR数字滤波器设计算法的基础上，采用滤波函数与分段卷积结合的方法实现对较长测井信号的处理。
The passage deals with the logging signal by the method of combining filter function with partition convolution which is based on the search of designing FIR digital.
提出了一种以降低识别计算代价为目标的孤立词语音识别系统的设计算法。
The paper provides a method for designing a set of isolated speech recognition system for the purpose of reducing expense in recognition calculation.
本文以邻接矩阵作为图的存储结构，指出如何在计算机上实现克鲁斯·卡尔算法，并分析所设计算法的时间复杂度。
This text regards adjacent matrix as the memory structure of graph, and points out how to realize Kruskal algorithm in the computer, and analyses its complexity.
另外，由于考虑了线性相位约束，滤波器组的通带平坦性约束变得更为简单，简化了设计算法。
Additionally, due to the linear phase constraint, the constraint on the passband flatness becomes simpler and the design algorithm is significantly simplified.
本文给出了一种信源一信道联合分组编码的设计算法。
Design algorithm of joint source-channel block coding is presented in this paper.
采集环境温度和压力，设计算法实现对温度和压力的补偿；系统还设计了各种接口，实现键盘、显示、报警和上传下载等功能。
Temperature and pressure of surroundings were compensated by algorithm, and kinds of interface to fulfill keyboard, display, alarm and up-down functions were designed.
最后给出了面向大批量定制的敏捷产品可重用设计算法。
At last, the reusable design algorithm of the agile products for mass customization is developed.
论文主要对带有降压变压器的晶闸管投切滤波器装置的设计算法进行了研究。
Study on the design algorithm of thyristor-switched filters with step-down transformers is emphasized in the paper.
图像质量评价研究的目标是设计算法，给出和人的主观视觉感受相符合的评价结果。
Its objective is to design algorithms which can give the objective evaluation results that in line with the human's subject perception.
同时，给出了切换状态反馈控制器和闭环切换系统的公共李雅普诺夫函数的设计算法。
Meanwhile, the design algorithm for the switching state feedback controllers and the common Lyapunov function of the closed-loop switched system is given.
第3章主要介绍了一种基于扁长椭球波函数的超宽带成形脉冲优化设计算法。
In chapter 3, a novel optimal UWB shaping pulse design algorithm based on prolate spheroidal wave functions is described.
本文介绍了国内首次开发的船位动态跟踪标绘程序的基本设计方法、设计流程和设计算法。
This paper introduces basic design ideas, flow charts and algorithms of program for dynamic tracing and signing of ship's position, which is first developed at home.
为优化装配系统中公差链的公差值，建立了几何尺寸公差的优化模型，并提出公差的分层优化设计算法：第一层，解决设计公称值居中的优化问题；
In order to optimize tolerance values for an assembly system, a model for geometric dimension tolerance optimization was established and an algorithm for optimal tolerance design was proposed.
然后，本文在传统双闭环控制的基础上，内环的控制算法不变，改变外环控制器的设计算法，主要采用IP控制方案。
Then, this thesis applies IP control algorithm to change controller in outer loop but not in inner loop based on basic double closed loop control system.
本文提出一个基于性能的LUT结构的FPGA的再设计算法，该算法采用特征函数以及对原布尔网络进行相应的约束实现电路的再设计。
This paper presents a performance based redesign algorithm for LUT type FPGA. The algorithm uses characteristic functions and presents a redesign method based on restriction for an original relation .
从三个方面研究了基于特征设计的形式化描述方法：基于特征设计的基本定义、设计过程模型及设计算法。
This paper aims to establish a domain independent representation formalism for feature based design in three aspects: formal representation, design process model and design algorithm.
最后，针对实现级联码译码量化实现，提出了一种基于SDR的双目标规划设计算法。
Finally, a scheme using the double objects programming based on SDR is purposed, and applied to the given concatenated code.
从系统设计角度研究了MIMO-OFDM系统的信道估计方法，提出一种基于空频域的最优导频设计算法。
The MIMO-OFDM channel estimation method is researched based on the system design, and a space-frequency domain optimal pilot-tones design algorithm is presented.
根据生物免疫系统的特性，提出一种基于免疫进化计算PID控制器参数的优化设计算法。
According to the properties of biological immune system, the paper presents an optimum design algorithm of PID parameter based upon immune evolution algorithm.
本文提出了一个基于进化算法的信道最优矢量量化器(COVQ)设计算法。
An evolutionary algorithm based channel-optimized VQ (COVQ) design algorithm on noisy channel is presented in the paper.
利用该理论和算法建立了常见几何特征模型的基因编码和简单零件的基因编码，并通过CATIA5R8验证了多特征零件设计算法。
Based on such algorithm, we finally build the gene coding of general geometry feature and simple parts, and its algorithm is validated in CATIA5R8 platform.
设计算法以在预定义的时间周期上检查所述流体液面以指示在多于一个点处的所述流体液面且还追踪所述流体液面。
The algorithms are designed to check the fluid level over predefined time periods to indicate the fluid level at more than one point and also track the fluid level.
根据本文提出的优化设计算法，作者详细研究了FIR线性相位带通滤波器优化设计实例。
Author studies in detail the optimal design examples about the FIR band pass filters with a linear phase according to the optimal design algorithm presented in the paper.
将成熟的电子学里的格型数字滤波器的概念和设计算法移植到光学滤波器，给出了根据目标滤波传递函数求解光格型阵列具体参数的算法。
The conception and algorithm simulation of lattice digital filter in electronics are transplanted into optical filter, with a novice algorithm to resolve optical lattice array concrete parameter.
然后在此基础上介绍了一种故障检测的方法，总结了故障观测器的设计算法。
Then fault detection approach based on this observer was introduced. The design algorithm of the fault observer was summarized.
然后在此基础上介绍了一种故障检测的方法，总结了故障观测器的设计算法。
Then fault detection approach based on this observer was introduced. The design algorithm of the fault observer was summarized.
应用推荐