• 详细地论述计算机数控系统软件设计可靠性实时性问题

    This paper discusses the issues of reliability and real time on CNC system software.

    youdao

  • 开放式计算机数控系统成为面向未来机床工业竞争必然发展趋势

    The open CNC system has become the trend of development of machine tool industry in long-term competition.

    youdao

  • 基于计算机数控系统逐点比较法基本思想提出一种新的补算法。

    Based on the basic principle of point by point comparison, a new interpolation algorithm is presented.

    youdao

  • 基于计算机数控系统比较法基本思想,提出一种新的补算法。

    According to the basic mechanism of point to point comparing method, a new interpolating recurrence algorithm is proposed.

    youdao

  • 讨论了一种用于立式铣床的PC -DSP主从式计算机数控系统

    This paper describes a computerized numerical control system for a two and a half axis upright numerical control milling machine.

    youdao

  • 基于模块化设计思想建立计算机数控系统硬件功能模块研制模式原型系统

    Based on the modular design method, this paper establishes of standard software and hardware modular developing mode of a CNC system's and a prototype system.

    youdao

  • 介绍分布式计算机数控系统通信网络结构、通信协议、通信管理软件特点功能

    Introduces its construction of distributed numerical control system, and communication protocols, and features and function of the software of DNC communication and managing.

    youdao

  • 本文主要描述计算机数控系统开关量接口原理,接口软件诊断方法程序编写技术

    The principle of on-off interface of CNC system, the software diagnosis and the programming technique for the interface are described.

    youdao

  • 本文分析了传统计算机数控系统布线复杂维护困难基础上提出基于现场总线计算机数控系统

    This paper proposes CNC system based on field bus on the basis of analyzing of which routing is complex and maintaining is difficult for past CNC system.

    youdao

  • 文章介绍分布式计算机数控系统通信网络结构、通信协议调试步骤以及通信管理软件的主要功能

    This article mainly introduces the construction of distributed numerical control system, communication protocols, debug process, and function of DNC communication and managing software.

    youdao

  • 本文根据开放型计算机数控系统理论,对开放型控制系统进行探讨,开发出套小型计算机数控系统

    In this thesis, the theory of open computer numeric control (CNC) was discussed and a miniature CNC system was developed according to ISO open computer numeric control.

    youdao

  • 为了提高实时处理能力分布式多处理器计算机数控系统(CNC)系统数控核心任务并行处理进行了研究。

    To improve the real time processing capability of distributed multiprocessor Computer Numerical Control (CNC) system systemically, the parallel processing of CNC core tasks was studied.

    youdao

  • 由于计算机数控系统具有可靠控制功能强易于使用等特点,CNC系统机床领域广泛使用外,在其它领域的应用越来越广泛。

    Due to its reliability, versatility and easy to use, CNC systems are not only used in workers of machine tools but also widely used in workers of other fields.

    youdao

  • 人们不得不采用数字逻辑电路机床专用计算机作为数控系统,被成为硬件连接数控简称数控(NC)。

    People have to use the digital logic circuit "build" into a special computer numerical control machine tool real as a system, the hardware connecting numerical control, or not numerical control (NC).

    youdao

  • 于是移植过来作为数控系统核心部件从此进入计算机数控(CNC)阶段

    So will it come as a transplant the core parts of the numerical control system has entered computer numerical control (CNC) phase.

    youdao

  • 所有计算机一样数控系统只能工作01组成的二进制下

    As with all computers, the CNC device works on a binary principle using only two characters 1 and 0.

    youdao

  • 提出一种基于现代数控系统计算机数据采样插补算法

    Represents a computer data sampling interpolation algorithm based on modern numerical control system.

    youdao

  • 设计了相应计算机程序构建了开放式模块化数控系统平台

    We also design the computer programs for the NC system and construct its platform which has an open and modular fashion.

    youdao

  • 最后提出“将计算机图形领域生成图形成熟算法直接应用数控系统插补算法”的思路

    At last, draw a new clue that well-rounded algorithm in the field of computer graphic can be used in CNC interpolation.

    youdao

  • 计算机控制下,数控系统平面加工方式有序连续加工出每个使它们自动粘接成型

    Until computer control, numerical control system process by level way process each thin layer and make they automatic sticking and shaping in succession in an orderly manner.

    youdao

  • 计算机数控系统联网实现集成制造基础

    Numerical control systems connected by computer are the foundation of implementing Integrated Manufacturing.

    youdao

  • 计算机处理后,将补偿信息反馈数控系统将得到的工件精度测量结果图形方式显示显示器

    The compensation information is feedback to NC system and the measured surface accuracy is displayed by drawing on the screen panel.

    youdao

  • 介绍了一种基于微型计算机多功能数控机床数控系统,并具体论述系统软件结构

    In this paper, a numerical controlling system of multi function machine tool is introduced, and explained concretely software structure of the system.

    youdao

  • 自动铝带绕片数控机床一种集成计算机数控技术电机驱动技术、PLC控制技术最新成就的自动化精密机床,数控系统核心所在。

    Automatic aluminum winding machine is an automatic accurate machine, which integrates some new technologies such as CNC technology, motor driver technology and PLC control technology and so on.

    youdao

  • 利用FANUC0数控系统具有RS 232c接口计算机联网,实现数控机床计算机通讯,进行数控系统参数、报警信息和加工过程状态信息提取。

    Connect the RS232C of FANUC0's NC system and computer's interface, realize the communication among machine tool and computer. Pick up the information of parameter in the system and alarm information.

    youdao

  • 数控刻楦一种集成计算机数控技术机床结构设计技术电机驱动技术等最新成就自动化精密机床,数控系统核心所在

    It was integrated that CNC, lathe structure technology and motor driver technology in this machine, of them CNC is the most important.

    youdao

  • 机床电器数控系统、数显装置伺服驱动装置计算机应用技术气动液压元器件

    Machine Tool electrical apparatuses, Digital Display Device, Control System, Servo Drive, Computer application technology, Hydraulic Components, Pneumatic Parts.

    youdao

  • 经过研究表明计算机组态数控系统理论促进柔性化开放化数控系统开发

    The studies we have performed showed that CCNC theory bring a new method for the development of CNC system with open and flexible architecture.

    youdao

  • 经过研究表明计算机组态数控系统理论促进柔性化开放化数控系统开发

    The studies we have performed showed that CCNC theory bring a new method for the development of CNC system with open and flexible architecture.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定