粗糙度和有关表面加工的附加备注。
Roughness implemented and additional remark about surface finish.
表面加工质量的改变。
应用：大理石花岗石石板砖块混凝土等表面加工。
Applications: Marble, Granite, Block, Brick Concrete, and Stone.
另外该机床也能够对其它一些工具零件进行表面加工。
By changing the abrasive wheel it can also process different type and outline .
在金属表面加工薄膜层是提高材料性能的重要途径之一。
Preparing thin solid film on the metal surface is one of the important methods to improve the metal properties.
因此，其表面质量的好坏将直接影响到表面加工的外观质量。
Therefore, its surface quality directly will affect the face work outward appearance quality.
针对表面残余应力的计算也证实了表面加工变质层的有效去除。
The demonstrated decrease of surface residual stresses testifies the removal of the former deformation layer.
主要原因与热处理回火温度、表面加工缺陷以及材料化学成分有关。
The cause of fracture is related with tempering temperature, machining defects on the surface and chemical composition of the fracture bolt.
带磁切削能有效减小切削力，提高刀具耐用度，改善表面加工质量。
Cutting with magnetic field is enable to make cutting force shrinking, longer tool life, lower cost and machining quality improved obviously.
通过电参数的不同匹配，分析研究了影响表面加工质量的因素及规律。
The factors and rules influencing surface roughness were analyzed by matching different electrical parameters.
表面加工部分：以质材柔软的布轻轻擦拭，避免用质料过粗的纸张擦拭。
Surface machining parts: quality materials soft cloth gently wipe and avoid using too thick of paper wiping material.
十字轴最大应力发生在圆弧过渡处，因此，应提高该处的表面加工质量。
The maximal stress in cross universal coupling happens at the circular transition where measures should be taken to enhance the surface machining quality.
本文阐述了一种基于流体二维振动的原子级无损伤超光滑表面加工技术。
A novel polishing technique based on the two-dimension vibration of fluid is put forward to obtain ultra-smooth surface without damage.
试验结果表明，该算法可有效地提高自由曲面的加工效率和表面加工质量。
The experimental results show that the proposed algorithm can improve machining efficiency and surface quality.
以表面加工多晶硅悬臂梁为例分析了MEMS器件在振动环境下的可靠性。
The MEMS reliability of a surface micromachined polysilicon cantilever under vibration is investigated.
结果表明航空铝合金的两种激光表面加工技术的这两种是不同的加工技术。
The above studies indicate laser shock-processing and laser shock-forming are different surface processing methods.
框锯机锯切工件表面加工质量在很大程度上取决于进给速度和锯切速度的匹配关系。
The quality of the workpiece surface is subject to the matching relation between the feed speed and the sawing speed to some large extent.
近来，为了适应环保要求，用于表面加工的光油正逐步从溶剂型光油向水性光油转化。
Recently, in order to adapt to the demands of environmental protection, for surface finishing of varnish is progressively from solvent-based light oil to water-based conversion varnish.
对断裂的金属接骨螺钉进行了化学成分、硬度、显微组织分析及表面加工质量的检测。
The analysis of chemical composition, hardness and microstructure and quality inspection of surface processing have been done to metal bone screw which was fractured in human body.
零件表面加工方案的选择是一个多因素约束的逻辑推理过程，需要大量工艺知识支持。
Selection of part shape machining process is a logic inference course restrained by many factors. A lot of machining knowledges are demanded.
根据复合构件加工中的各种缺陷，分析了采用预压应力钻削对改善表面加工质量的重要性。
After the various visual defects during drilling processes were analyzed, the importance of drilling with compressive pre stress was presented.
为减轻金刚石刀具的磨损，提高工件表面加工质量，采用超声振动的方法切削不锈钢零件。
Ultrasonic vibration is applied to diamond turning of stainless steel in order to decrease diamond tool wear and improve the surface quality of the workpieces.
在楔形玻璃平板表面加工闪耀光栅，即构成了光栅楔形平板，本文详细介绍了其工作原理。
The grating wedge plate is formed by making flare grating on a wedge plate of glass.
加大插齿刀后角可以有效改善插齿刀的切削条件，提高齿表面加工质量和延长刀具使用寿命。
Enlarging the clearance of gear shaping cutter can improve efficiently its cutting condition, the gear surface quality and tool life.
结果表明：回火索氏体是最佳的组织形态；微观硬度的不均匀性显著影响钢的表面加工质量。
The results indicated that the tempered sorbite was the optimum microstructure, the inhomogeneous distribution of micro hardness affected markedly the finish quality of the steel surface.
该磨头能简单的装配在普通机床上，配合一定的控制设备，即可进行硬脆材料的优良表面加工。
This grinding head can be simply mounted on the general purpose machine tools, and is suitable for machining the hard brittle material with equipped some control system.
零件的表面加工精度由相应的参数来表征，例如表面粗糙度参数、波纹度参数和形状误差参数等。
The surface machining precision of the accessories is denoted by relevant parameters, such as the parameters of surface roughness, the parameters of ripple, the parameters of shape error and so on.
零件的表面加工精度由相应的参数来表征，例如表面粗糙度参数、波纹度参数和形状误差参数等。
The surface machining precision of the accessories is denoted by relevant parameters, such as the parameters of surface roughness, the parameters of ripple, the parameters of shape error and so on.
应用推荐