生产方法是乳液聚合，和苯乙烯-丁二烯橡胶的生产过程相似，得到“热”橡胶和“冷”橡胶。
Produced by emulsion polymerization in a similar way to styrene-butadiene rubber processes, yielding both "hot" and "cold" rubbers.
改性聚乙烯树脂(SPE)是由PE树脂与苯乙烯-丁二烯共聚物经反应釜高温密炼而成的树脂颗粒。
Modified polyethylene resin (SPE) is PE resin and styrene - butadiene copolymer by high-temperature reactor mixing to make of resin particles.
采用纳米有机蒙脱土（OMMT）改性的苯乙烯-丁二烯-苯乙烯嵌段共聚物（SBS）增韧聚丙烯（PP）。
Styrene-butadiene-styrene block copolymer(SBS)modified with organic montmorillonite(OMMT)was utilized to toughen polypropylene(PP)in this paper.
用红外光谱、凝胶渗透色谱、动态黏弹仪研究了苯乙烯-丁二烯嵌段共聚物（SBS）改性沥青的薄膜烘箱老化行为。
Thin film oven aging behaviors of SB S modified asphalts were studied by infrared spectrum, gel permeation chromatography, dyn amic mechanical property analysis.
乐高积木始于小颗粒状的丙烯腈丁二烯苯乙烯(abs)，一种闪亮的可以被用于制造从硬帽子到水管的塑料。
LEGO bricks start out as granulated acrylonitrile butadiene styrene (ABS), a type of shiny plastic used to make everything from hard hats to toys to pipes.
由各种比例苯乙烯、丙烯腈和丁二烯组成的一类热塑性合成共聚物。
A type of thermoplastic synthetic copolymer composed of various proportions of styrene, acrylonitrile and butadiene.
合成橡胶是丁二烯（75％）和苯乙烯（25％）的共聚物。
Synthetic rubber is a copolymer of butadiene (75%) and styrene (25%).
ABS的多功能性來源于其三种组成单体丙烯睛，丁二烯和苯乙烯。
The versatility of ABS is derived from its monomer building blocks Acrylonitrile, Butadiene and Styrene.
此方法也用于包含两种或两种以上单体的系统(共聚)，例如苯乙烯和丁二烯。
This method is also applicable to systems involving two or more type of monomers (copolymerization), for example, of styrene and butadiene.
用动态激光光散射法测定了丁二烯-苯乙烯乳液聚合的乳胶粒子的粒径及其分布。
The latex particles size and size distribution in emulsion copolymerization process of butadiene-styrene were determined by dynamic laser scattering.
丁二烯一苯乙烯橡胶和加油丁二烯一苯乙烯。乳状聚合物型。试验配方和硫化特性的评定。
Styrene - butadiene rubbers and oil extended styrene butadiene. emulsion polymerised types. test recipe and evaluation of vulcanisation characteristics.
ABS是由丙烯腈、丁二烯和苯乙烯三种化学单体合成。
ABS is produced by a combination of three monomers: acrylonitrile, butadiene, and styrene.
挤出级的ABS（丙烯腈丁二烯苯乙烯）。具有超强的韧性非常高品位的影响，特别是低温应用，以及良好的热成型。
Lustran ABS 1152 Extrusion grade of ABS (acrylonitrile butadiene styrene). Very high impact grade with superior toughness, especially for low temperature applications, and good thermoformability.
三中单体的聚合产生了具有两相的三元共聚物，一个是苯乙烯-丙烯腈的连续相， 另一个是聚丁二烯橡胶分散相。
The polymerization of the three monomers produces a terpolymer which has two phases: a continuous phase of styrene-acrylonitrile (SAN) and a dispersed phase of polybutadiene rubber.
详细叙述了加压过滤设备在丙烯腈-丁二烯-苯乙烯(abs)装置上的实验和应用情况。
This paper described in detail the test and application of pressure filtration apparatus in ABS plant.
研究了热塑性聚氨酯(TPU)与丙烯腈-丁二烯-苯乙烯共聚物(abs)共混对ABS结构和性能的影响。
This paper studied the influence of blending ABS with thermoplastic polyurethane (TPU) on the structure and properties of ABS resins.
未反应的丁二烯通过闪蒸去除，苯乙烯在萃取塔中通过蒸汽萃取（剥离） 。
Unreacted butadiene is removed by flash distillation, and syrene by steam-stripping in a column.
前言：对软质聚氯乙烯（ PVC）/ 丙烯腈-丁二烯-苯乙烯共聚物（ABS）合金的力学性能、加工性能进行了测试，并利用差示扫描量热仪和扫描电镜对试样断面结构以及两相的相容性进行了表征。
The mechanical property and processing property of soft PVC/ABS alloy were tested, the fracture surface structure of the sample and compatibility of the two phases were characterized.
中国石油兰州石化公司合成橡胶厂将碳四、苯乙烯、丙烯腈-丁二烯-苯乙烯嵌段共聚物等装置的凝结水收集后，先用于丁腈硬胶聚合用盐水的加热，换热后的回水再用于凝聚和洗涤用水；
The condensed water from plants of C4 , styrene and ABS was recycled and applied to heat salt water in production of acrylonitrile-butadiene rubber, and then used for agglomerating and washing.
以热重分析法（TG、DTG）为手段，对丙烯腈-丁二烯-苯乙烯共聚物（ABS）的热降解动力学进行了研究。
Thermal degradation of polymer ABS was Studied by using the method of gravimetric analysis(TG, DTG).
名称：2-乙烯基吡啶与1，3-丁二烯和苯乙烯的聚合物；
Pyridine, 2-ethenyl-, polymer with 1,3-butadiene and ethenylbenzene;
名称：2-乙烯基吡啶与1，3-丁二烯和苯乙烯的聚合物；
Pyridine, 2-ethenyl-, polymer with 1,3-butadiene and ethenylbenzene;
应用推荐