本防腐蚀技术规范必须经过供应商的检查。
This corrosion protection specification must be examined by the supplier.
对比了国内外抗锌液腐蚀技术的研究现状。
The research status for the technology of providing corrosion protection was discussed.
还介绍了加工高酸值原油中的防腐蚀技术。
The corrosion prevention techniques during the refining of crude oil with high acid value are also introduced.
采用水热腐蚀技术制备的铁钝化多孔硅表面具有可调超结构。
Tunable superstructures were obtained in hydrothermally etched iron-passivated porous silicon (IPS).
使用和添加缓蚀剂已成为防腐蚀技术中应用最为广泛的方法之一。
The application and addition of inhibitor has become one of the most widely-used methods in anti-corrosion technology.
结果表明，新的防腐蚀技术措施和原有的防腐方法相比，具有明显的防腐效果。
The result shows, the new technical measures for corrosion prevention have more obvious effect than the old ones do.
牺牲层腐蚀技术结合MEMS技术是制作三维可动微机构的一个重要加工手段。
Wet chemical etching of sacrificial layers plays an important part in fabricating movable tree-dimensional micromachines by combination with MEMS technologies.
采用激光快速熔凝和深腐蚀技术，对快速凝固过程中铸铁的共晶生长进行了研究。
The eutectic growth of cast iron during rapid solidification has been studied with laser remelting and deep etching.
文章评述了抓好防腐蚀技术工作与延长装置开工周期、提高企业经济效益的关系。
The effects of strengthening the corrosion protection work on extending the operation cycle if the unit and improving the profitability of the enterprises were discussed.
并针对硅微压传感元件研制中存在的问题，提出采用化学腐蚀技术，选择性腐蚀工艺控制膜厚。
In view oi the problems existing in the silicon micro pressure sensors, this paper proposes the chemical etching techniques and the selective etching processes to control diaphragm thickness.
通过改变溶液的组成成份，用水热腐蚀技术原位制备出具有不同表面钝化状况的四类多孔硅样品。
Through varying the components of the hydrothermal solution, four kinds of PS (porous silicon) are prepared by the hydrothermal method.
采用着色腐蚀技术，金相显示了球墨铸铁缩松区中奥氏体枝晶组织形貌，分析了球铁缩松的形成机制。
The morphology of austenite dendrites in shrinkage porosity in nodular iron is displayed by the color etching technique and the formation mechanism of shrinkage porosity has been analyzed.
对垂直腔面发射激光器的湿法腐蚀技术、选择氧化工艺、合金工艺等关键工艺进行了研究，得到了最佳工艺条件。
We have explored technologies for the fabrication of VCSELs, such as wet etching, wet and selective oxidation and annealing.
并与现有的各种重防腐蚀技术进行了分析对照，阐明了该发明的优越性、新颖性、首创性和实用价值，为我国和国际防腐蚀科技提供了一条崭新的途径。
The superiority, novelty, and practical value were introduced with comparison to various heavy anti-corrosion technology, thus a new way was provided to the corrosion science and technology.
SprayCool已经申请了专利的这项两阶段液态冷却技术使用了无腐蚀、不导电的液体薄雾。把这种薄雾喷在一个薄片上，然后蒸发并冷却电子设备。
SprayCool patented two-phase liquid cooling technology USES a fine mist of non-corrosive, non-conductive liquid, sprayed in a thin layer, which evaporates and cools electronics.
虽然这项技术首先在老鼠身上取得突破性进展，但是仍可以为那些因食物腐蚀或受创而失去牙齿的人获得“长出”替代物的机会铺平道路。
The breakthrough was made on mice but could pave the way for those who lose teeth to decay or injury being able to "grow" replacements.
钢网制作技术包括化学腐蚀，激光切割和电铸。
Stencil manufacturing techniques include chemical etching laser cutting and electroforming.
采用SEBF重腐蚀防护技术的船用水泵，在公司内的试验台架上进行模拟海水的对比试验。
Contrast test simulating seawater has been performed on Marine pumps using SEBF sever corrosion prevention technology on the test bench in the Company.
进行了腐蚀环境下航空材料裂纹扩展的自动测量技术研究。
Crack length measurement technique, which used for aeronautical materials under corrosive environment, has been studied in this paper.
本文介绍了工程中采用的瓦斯突出、岩溶水突出、油气燃烧及地下水腐蚀的防治技术。
This paper introduces control technologies for gas blower, Karat water gushing, oil and gas burn and corroding of groundwater.
多通道超声自动检测是管道腐蚀内检测的关键技术。
Multi-channels ultrasonic is dealt with, which is a key technology of in-line inspection of pipeline corrosion.
基于含铬处理对环境影响的考虑，世界范围内都在积极开发有效的替代技术，用于铝合金腐蚀保护从而代替铬酸盐转化处理。
Environmental concerns relating to chromate -containing treatment employed for the protection aluminum alloys from corrosion have led to an intensive search for their replacement in the world.
技术上合理的防腐蚀保护不允许出现上述的缺陷，所以在进行任何涂刷前应将其表面打磨光滑以避免出现这些缺陷。
Should the said defects not allow for a technically sound corrosion protection, then these defects are to be ground smooth before any paint application.
积极研究输水建筑物老化防治技术、病害诊断技术和防腐蚀、修复、堵漏技术；
Actively research technologies of ageing prevention for water transfer constructions, disease diagnosis and corrosion prevention, restoration and leakage-blocking technologies.
材料腐蚀监测是利用视频技术、计算机图像处理技术、模式识别技术等对材料外观腐蚀图像进行检测、处理及管理。
Material decay monitoring, using techniques of video, computer image processing and pattern identification, detects, processes and manages the external material decay image.
埋地裸金属网现场腐蚀检测技术研究着重解决了现场检测中的电流分散、检测方法、噪声干扰等问题。
The key of corrosion detecting technique of ground grid was to solve the problem of in field current distribution, detecting methods and the noise interfering.
腐蚀监测技术除定点测厚之外，电化学测量方法、电阻探针和电感探针法均是行之有效的方法。
In addition to the positioned thickness measurement, the electro-chemical measurement, resistance probe and inductance probe techniques were also the effective methods in corrosion monitoring.
腐蚀监测技术除定点测厚之外，电化学测量方法、电阻探针和电感探针法均是行之有效的方法。
In addition to the positioned thickness measurement, the electro-chemical measurement, resistance probe and inductance probe techniques were also the effective methods in corrosion monitoring.
应用推荐