采用螺距粗的螺丝和螺母实现螺纹型芯自动脱模。
A type of screw and nut with coarse pitch was applied to realize thread core demoulding automatically.
如果脱模剂发粘，则减少硅酸盐。
蛋糕脱模、放在架子上让它完全冷却。
Invert the cake, still in the pan, onto a wire rack and leave to cool completely, upside down.
经生产验证，达到了理想的脱模效果。
解决薄壁成型困难，薄壁带倒钩脱模困难等技术问题。
The difficulty of the mould forming and the knockout with thin-wall structure were solved.
用热毛巾围住蛋糕模外，帮助脱模，用发起的忌廉装饰。
Use hot towel to help demould the cake. Put whipped cream on it for decoration.
此倒勾在滑块上强迫脱模，倒勾是否可以减小到0.6。
This undercut will be force ejected out, Please confirm whether it can be reduced to 0.6 mm.
尤其适用于大跨度桥梁构件及断面复杂的混凝土构件脱模。
Particularly suitable for large span bridge structures and cross-section complicated concrete component demoulding.
适用于各种模具的脱模，保养和清洁，使用方便，脱模效果好。
Applicable to a variety of mold release, maintenance and cleaning, easy to use, Demoulding effect.
要确定脱模剂的精确配方是困难的，因为软木是一种天然产物。
It is difficult to set down an exact formula because cork is a natural product.
同时设计了与专用脱模机配套的脱模环，保证产品的顺利脱模。
Besides, a demolding ring mating with specialized demolding machine was designed, which could ensure a smooth demolding.
更强大的设计标准900系列阻燃等级。内部脱模。紫外线稳定。
More robust design of standard 900 series flame retardant grade. Internal mold release. UV-stabilized.
绝缘子、避雷器产品中的纤维棒准确定芯、退芯、脱模等多种功能。
Accurate fiber seting core, back core, mold release and other function for insulator, arrester parts.
挤压后的零件不易脱模是多台阶空心零件在挤压成形工艺中的难点。
The forming of hollow steps shaped part by the extrusion forming process is a difficult problem.
水太多会减少粘附力，加水太少则会使脱模剂在模具表面堆积太厚。
Too much water reduces the adhesion and too little piles the material up too thick on the mold surface .
通过对快速膨胀变形的适当控制，可开发出滞后膨胀式脱模养护剂。
A new lag inflating curing agent could be developed by controlling the expanding speed properly.
设计了螺纹脱模机构、浇注系统、螺纹转动保险机构和温度控制系统。
Thread demoulding mechanism, injection system, protect mechanism of thread rotation and temperature control system were designed.
为避免对于测定元素的干扰，可分别选用溴或碘的化合物作为脱模剂。
To avoid interference, compounds containing Br or I can be used as mould release agent.
介绍当塑料件留在动或定模中时，注射模双脱模结构的设计及其特点。
The design and characteristics for the double stripper mechanism of the injection mold arc introduced.
通过计算设计了注塑模具的成型结构、 脱模机构、浇注系统等方面。
The design includes the mould structure, the mould cavity, the pour system, and so on.
对辊切饼干机在成型和辊切中的面带入辊、饼干坯脱模进行了力学分析。
The dough drawing the biscuit shaping and separating from patterns in roller cutting biscuit machine were analysed.
通过对有内螺纹的塑件结构分析，确定采用齿轮齿条机构脱模的模具结构。
Through analyzing the structure of plastics with inner screw, determined mold structure with gear and rack stripping screw mechanism.
该硅油脱模剂性能良好，广泛应用于PU、ABS和橡胶模塑制品的脱模。
The silicone oil release agent has good properties and is widely used in PU, ABS and rubber mould.
使用脱模剂可能造成短射（缺料），鱼眼纹，条纹，表面斑点，或影响透明度。
Mold release agents cannot be used as shortmolding, fish-eye marks, streaking and blurring would occur.
基面上的积垢、浮浆、脱模剂、油污、装饰物、尘土等脏杂物必须设法清理干净。
The base surface fouling, floating pulp, release agents, oil, decorative objects, dust, dirt and other debris must try to clean up.
震动脱模：本机配有垂直多次震动脱模，对于高难度产品，不易变形，脱模容易。
Vibration demould: this machine is outfitted with vertical vibration demould device which is suitable for complex products for easy demould and less possibility of deforming.
介绍了一种型芯与推板双锥面配合脱模机构设计，分析了结构特点及制造加工工艺性。
A demoulding structural design by the cooperation of core and dual-cone is introduced, and the structural character and manufacture process are analyzed as well.
结果表明该硅油脱模剂性能良好，可广泛应用于PU、ABS和橡胶模塑制品的脱模。
The silicone oil release agent has good properties and is broadly applied in PU, ABS and rubber mould.
有一些关键因素，可以帮助管理，避免常见的陷阱，识别脱模更快和学习他人的经验。
There are some critical factors can help management to avoid common pitfalls, identify knockouts sooner and learn from the experience of others.
有一些关键因素，可以帮助管理，避免常见的陷阱，识别脱模更快和学习他人的经验。
There are some critical factors can help management to avoid common pitfalls, identify knockouts sooner and learn from the experience of others.
应用推荐