结果表明：双向高斯脉冲激励的处理过程和角分辨率特性均优于单向高斯脉冲。
Results show that the signal processing and the properties of angular resolution by the dual Gaussian pulse excitation are better than those by the singular Gaussian pulse.
本文运用本征函数展开方法，求解均质杆——弹簧系统受序列矩形脉冲激励的振动响应问题。
This paper, using characteristic function expansion method, have soluted a vibration response problem of a uniform bar-spring which was subjected to a series of rectangular pulses excitation.
本文讨论了矩形脉冲激励的对称驻波天线的能量方向图、总辐射能量、辐射效率和辐射电阻等问题。
The energy pattern, total radiation energy, radiation efficiency and radiation resistance of standing-wave dipole excited by rectangular pulse are discussed.
讨论了脉冲激励幅值以及系统阻尼等对冲击谱的影响规律。
The regular pattern of influence on impact spectra by amplitude of pulse excitation and system damping was discussed.
利用非线性时域有限差分数值模拟方法，得到了高斯脉冲激励下的双稳态响应曲线。
The bistable hysteresis loops with Gaussian pulse pumps is obtained by using nonlinear FDTD method.
本文重点讨论了曲轴橡胶减振器测试中常用的正弦扫描法和脉冲激励法。
Sine wave scanning method and pulse excitation method-common methods for the test of rubber absorbers are studied emphatically.
多脉冲激励线性预测编码（MPLPC）方法中，合成滤波器的阶数是固定的。
The order of synthesis filter is fixed in multi-pulse excited linear prediction coding(MPLPC) method.
分别考虑了两种简单情况下梁的响应：阶跃激励和脉冲激励。
Two simple cases, step and impulse function responses, were considered respectively.
对框架柱进行了局部挠曲模态的脉冲激励试验和正弦稳态扫描试验。
Impulse excitation and sine stable sweeping tests of local bending modes of the frame columns were conducted.
研究多层堆码包装系统在半正弦脉冲激励下的冲击特性。
The shock characteristics of linear stacking packaging system were investigated under the action of half-sine acceleration pulse.
为了验证模型参数的准确性，对推进轴系进行了脉冲激励试验。
For verifying the accuracy of the model parameters an impulse excitation test was performed.
电磁激振器安装在转子的伸出端，产生脉冲激励力或不同频率的简谐激励力。
EA mounted on the either end of rotor shaft can generate impulse excitation force or simple harmonic excitation force with different frequency.
研究考虑易损件的正切型包装系统在半正弦脉冲激励下的冲击特性。
The shock characteristics of a tangent packaging system with critical components are investigated under action of a half-sine acceleration pulse.
本文从复模态理论出发，探讨了在机床模态分析中，应用脉冲激振法激励机床时的一些问题。
Based on the complex modal theory, some problems arising in machine tool modal analysis by impulse excitation are examined.
研究了后峰锯齿脉冲激励下洗衣机缓冲包装系统的冲击响应。
The shock response of washing cushioning system is investigated under the action of bock crest tooth pulse.
本文针对语音多脉冲激励模型，提出了量化网络的结构和学习规则，并将此方法和传统方法进行了比较。
We provide the architecture and learning rule of the quantizing network, and compare it with the traditional method in the implementation.
在钟形双脉冲激励下，观察了DH激光器的电荷存储效应。
The charge storage in DH laser driven by pairs of bell-shape pulse current has been investigated.
通过在浊音段提取多脉冲激励信号加入语音的状态方程，有效地重建语音的高频谐波。
By extracting the multipulse excitations during voiced speech, and adding the excitations into the process equation the harmonic of high-frequency area can be reconstructed.
计算由于车辆的运行而使储油罐受到脉冲激励及谐波激励作用下，储油罐的响应。
The oil tanker's response are calculated when it get the impulsive excitation and harmonic excitation.
对五轴联动铣床采用锤击脉冲激励法和变时基采样方法进行实验模态分析，获得机床的各阶固有频率、振型及其相应的振型动画。
The experimental modal analysis of five-axis linkage milling machine is made by using hammer-hitting pulse-inspirit method and change time based sampling method.
建立了各类缓冲包装系统在不同加速度脉冲激励下的统一的动力学模型，开发了缓冲包装分析系统应用软件。
A general dynamic model of cushioning packaging systems under different acceleration pulse is suggested, and the corresponding software is developed for the analysis of cushioning packaging systems.
研究了正切包装系统的关键部件在矩形脉冲激励下的冲击破损评价方法。
The damage potential and evaluation method of a tangent nonlinear packaging system with critical component was investigated under the action of rectangular acceleration pulse.
用超短光脉冲激励染料溶液，进行超荧光的研究：1。超荧光光谱峰移动和光谱宽度；
The amplified spontaneous emission in dye solutions excited with powerpul picosecond light pulses is studied in two respects:1. spectral peak shift and the emission width;
对转台中环主轴施加轴向定位预紧力，通过脉冲激励法试验得到角接触球轴承的轴向刚度，试验结果与理论结果吻合较好，为转台研制中各轴系预紧量的控制提供了理论和实验依据。
The axial fixed position preload is applied to middle ring of the shaft, the axial rigidity of the angular contact ball bearing is obtained by the impulse excitation tests.
利用付立叶逆变换，给出了半正弦脉冲激励下桩顶速度时域响应半解析解。分析了主要参数对响应的影响。
Then, a semi-analytical solution for the velocity response of the pile subjected to a semi-sine wave exciting force was derived by using invert Fourier transform.
实际结果表明，我们研制的脉冲激励电源可以满足大功率TEACO2激光器的特殊工作要求。
The experimental results demonstrate that this pulsed exciting power supply developed by our lab can totally satisfy the special requirement of the high-power TEA CO2 laser.
实际结果表明，我们研制的脉冲激励电源可以满足大功率TEACO2激光器的特殊工作要求。
The experimental results demonstrate that this pulsed exciting power supply developed by our lab can totally satisfy the special requirement of the high-power TEA CO2 laser.
应用推荐