属于聚氨酯系列的环抱产品，溶剂排放量低，符合欧洲最严格的排放标准。
It is a 2K product based on acrylic resins with high solids content(HS), and its low VOC conforms to the strictest European standard.
聚氨酯系列产品主要包括：聚氨酯挡煤板、聚氨酯刮刀等，为满足不同客户的需求，可根据图纸、样品定做各种规格的产品。
Polyurethane products mainly include: polyurethane block of coal plates, polyurethane scraper, etc., to meet different customer needs, special orders can be made as drawing and sample.
建筑立面采用的是覆有聚氨酯涂层的胶合板，他们形成了一系列不规则的交叉图纹。
The facade is covered with polyurethane coated toned plywood panels that make an irregular cross pattern.
以成熟的工艺、合理的配方生产加工各种聚氨酯弹性体系列制品。
To mature technology and reasonable formula production and processing of various polyurethane elastomer series of products.
合成了一种新的聚脂型脂肪族多嵌段聚氨酯(ASPU)系列样品。
A new series of aliphatic segmented polyurethanes (ASPU) had been prepared and their infrared spectra were assigned.
合成了一种新系列丁二酸多元醇聚酯，并用它合成出耐酮类溶剂的聚氨酯弹性体。
Several succinic acid polyester polyols were synthesized and used to prepare polyurethane elastomers having excellent solvent resistance.
合成了一系列不同结构的丙烯酸聚氨酯预聚物，重点讨论预聚物的分子结构及相对分子质量对紫外光固化反应的影响。
A series of acrylic-polyurethane resin with different structure were prepared, and the influence of the structure and molecular weight of the polymers on UV-curing reaction was studed.
采用羟基官能度不同的马来酸酐改性蓖麻油(MCO)，合成了一系列软段含有离子基的聚氨酯水分散液(MCPU)。
A series of aqueous polyurethane dispersions (MCPU) with ionic groups in the soft segments were prepared with maleic anhydride modified castor oil (MCO) of various hydroxyl functionality.
合成了系列水性聚氨酯分散液，就分子链软段中亲水性链段聚乙二醇(PEG)含量对聚氨酯涂膜结晶性的影响进行了探讨。
A series of water - borne polyurethanes were synthesized, and the effect of PEG content in soft - segment on the crystallization of their cast films was studied.
阳离子封底剂及SC—800系列涂饰剂为新一代聚氨酯涂饰剂产品。
FD-01 Cationic Base Sealing Coat and SC-800 series finishing agents are the polyurethane finishing materials of a new generation.
利用双辊制备了一系列热塑性弹性体聚氨酯（PU ）和铁电钛酸锆酸铅盐（PZT）的电致感应PZT/PU复合物。
Electrostrictive composites of thermoplastic elastomer polyurethane (PU) and the ferroelectric lead zirconate titanate (PZT) with various volume fractions were prepared by hot roller miller.
本文在蓖麻油型聚氨酯网络聚合物的基础上加入不同比例的珍珠岩或蛭石的粉末合成了系列样品。
A series of samples is synthesized by polymer networks materials based on castor oil urethane and acrylate with different ratio pearlite or vermiculite.
本文采用丙烯醇、不同分子量聚乙二醇(PEG)以及2,4 -甲苯二异氰酸酯(2,4 -TDI)为主要原料合成了系列不同分子量的非离子型可聚合聚氨酯表面活性剂。
A series of polymerizable nonionic urethane surfactants were synthesized with 2, 4-tolylene di-iso-cyanate (2, 4-tdi), polyethylene glycols (PEG) of different molecular weight and allyl alcohol.
概述了一系列新型的软段含离子的聚氨酯离聚物的合成、性能、研究进展，以及这类离聚物对聚氨酯离聚物离子簇解离现象的贡献。
The synthesis, properties, recent research development and the significance for the ionic aggregate dissociation of polyurethane ionomers with ions in soft segments are reviewed.
利用热重分析及热重动力学方法研究了作者新合成的一系列新型聚酯型脂肪族聚氨酯的热稳定性。
The thermostability of a new series of aliphatic polyurethanes (ASPU)has been studied by TG and thermogravimetric kinetics.
在室温下，选用聚醚多元醇，多异氰酸酯等材料，合成了一系列高硬度聚氨酯弹性体。
At room temperature, polyether-polybasic alcohol, polyisocyanate and so on were used as mainly materials to synthesize a series of high-hardness polyether urethane elastomers.
通过聚氨酯预聚体法合成出硅烷KH-550封端的聚氨酯热熔胶（SPUR），并制备了一系列不同封端率的硅烷化聚氨酯热熔胶。
Silylated hot melt moisture cured polyurethane adhesive(SPUR)was prepared with KH-550, and a series of polymer was synthesized with different silane ending ratio.
利用溶液聚合方法合成了聚醚聚氨酯，并以聚氨酯、高氯酸锂和增塑剂为组分，制备了一系列新型聚合物固体电解质。
A poly (ether urethane) (PU) was synthesized via solution polymerization, which was mixed with LiClO4 and various plasticizers to generate a series of novel solid polymer electrolytes.
利用溶液聚合方法合成了聚醚聚氨酯，并以聚氨酯、高氯酸锂和增塑剂为组分，制备了一系列新型聚合物固体电解质。
A poly (ether urethane) (PU) was synthesized via solution polymerization, which was mixed with LiClO4 and various plasticizers to generate a series of novel solid polymer electrolytes.
应用推荐