优点：耐磨性佳、防滑、有弹性、不易断裂、柔软度较好、伸延性好、收缩稳定、硬度佳、弯曲性好。
Advantages: good abrasion resistance, anti slip, elasticity, not easy to break, softness, good stability, extended contraction, good hardness, good bending.
具有优良的韧性和耐磨性，适用于低速切削，允许采用大前角，保证刀刃的锋利性，从而可随大的切削力，并获得光洁度高的表面。
Good toughness and wear resistance, suitable for low speed cutting allowing a big rake Angle, ensuring the sharpness of the edges, bearing a heavy cutting force and achieving good surface finish.
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also the abradability and corrosion stability.
内椎光洁度好，与电极接杆配合更精密，更具耐磨性。
There are a good glaze in inner vertebra which matches the electrode pole tightly and has better abrasion resistance.
良好附着力，良好抗刮耐磨性，良好耐候性，耐曝晒，高光泽度。
Excellent adhesion. Excellent rub and scratch resistance. Excellent weather resistant. Light fastness. High gloss.
产品特点：材质优良，加工细腻，精密度高，光洁度好，耐磨性强，使用寿命长。
Features: Material fine, fine processing, high precision, finish good, strong wear resistance, long life.
研究结果表明，混粉电火花镜面加工不但能够显著降低加工表面粗糙度值，而且能够提高加工表面的耐磨性、耐蚀性和表层显微硬度。
It is proved that mirror EDM with mixed dielectric powders can not only decrease the surface roughness, but also improve the surface abradability, corrosion-resistance and micro - hardness.
电缆外护套机械强度高、耐磨性好，并且具有高光洁度。
The outer sheath of cables has high mechanical strength, good abrasion resistant and high polish degree.
与现有的镀膜材料相比，本发明提供的镀膜材料的薄膜同时具有较小的表面粗糙度、较高的硬度和较好的耐磨性。
Compared with the existing coating material, the film of the coating material simultaneously has the advantages of smaller surface roughness, higher hardness and better wearing resistance.
对于雾化法得到的ZWC预合金粉末和ZSF预合金粉末组成的胎体锯片，金刚石浓度为18%时即能够保证有较好的锋利度、耐磨性以及加工质量。
Better sharpness, wearability and working quality of the saw blades can be ensured by using atomized prealloyed powder ZWC and ZSF at diamond concentration of 18%.
表面粗糙度与机械零件的配合性质、耐磨性、工作精度、抗腐蚀性有着密切的关系，它影响到机器或仪器的可靠性和使用寿命。
The surface roughness directly influences the conformity, wear resistance, corrosion resistance, working accuracy of the machine, and the reliability of the instrument and its service life.
同时，加入蜡增强了其耐磨性及抗划伤性能，加入增白剂可以增加油墨的光泽度、鲜艳度及分辨率。
In addition, wax is added to increase wear resistance and scratch resistance, and brightening agent is added to increase the lustrousness, brilliance and definition of the ink.
分析得到了粗糙度与耐磨性关系曲线，结果表明三角形晶粒以及适中的粗糙度能有效的提高薄膜耐磨性。
Grain shape and surface roughness are indicated to codetermine the abrasion resistance of the film. Further, the ar film with triangular grain and moderate roughness shows good abrasion resistance.
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also th...
这既与涂层的耐磨性、表面粗糙度和抗氧化性能有关，也与硬质合金A的硬度、韧性和抗弯强度有关。
This is related not only to the wearability, the surface roughness and the oxidation resistance of coating but also to the hardness, the toughness and the bending strength of carbide alloy A.
金刚石膜刀具和聚晶金刚石刀具硬度高，耐磨性好、磨擦性好、磨擦系数小、抗粘接性强，用于有色金属的高光洁度加工。
These kind of cutting tools have high hardness, good wear-resistance, low friction coefficient, can be used for high surface finishes machining of non-ferrous.
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also the abradability and corrosion stabili...
混粉电火花镜面加工不但能改善加工表面粗糙度，且能提高加工表面的耐磨性和耐蚀性。
The powder mixed dielectric mirror EDM not only can improve the machined surface roughness but also the abradability and corrosion stabili...
应用推荐