分析了不可压缩刚粘塑性圆轴扭转和拉伸的组合变形。
The combined deformation due to torsion and tension of incompressible rigid viscoplastic circular shafts is analyzed.
在工程构件中，最常见的变形形式是弯曲变形和弯扭组合变形。
In structural members, the deformation is usually caused by bending or by a combination of bending and torsion.
本文采用组合变形的分析方法，对锥体连接钎头工作时进行受力分析；
Using the combined deformation analysis method, the author mache an analysis of tapered bit forced in operating.
本文采用两个32单元变形镜搭建了一个用于相位校正的组合变形镜。
The CDM AO system for wavefront correction is built, which consists of two 32-element DMs.
本文从双向弯曲、拉弯、扭弯等组合变形方面详细推导了应变能公式，得出组合应变能为各基本应变能之和。
In this paper, the formula of strain energy is derived in detail form the combined deformation like bidirectional bending, tension-bending and torsion-bending deformation. Result illustrates th...
在我们变形虫那样的远古祖先身体里，基因之间已经形成了固定的组合来一起从事构成细胞壁和其他基本的生命必要活动。
In our distant, amoeba-like ancestors, clusters of genes were already forming to work together on building cell walls and on other very basic tasks essential to life.
一般情况下，模型栅格的变形是轴向应变和切向应变的组合。
In general, the deformation of the model grille is a combination of axial and shear strains.
索穹顶结构是大变形柔性组合结构，其受力分析属于几何非线性问题，求解较复杂。
Cable dome is a large deformation composite structure consisted of flexible cables. Its analysis is a geometric nonlinear problem and is difficult in its solution.
设计分析：含荷载组合计算、截面配筋设计、承载能力计算、截面应力验算、变形及裂缝宽度验算等。
Design and analysis: loading combinations, section steel area calculating, earring capacity computation, section stress checking, deformation and crack width checking and so on.
对精密机床、数控机床、座标镗床、磨床、加工中心及组合机床，也能有效地减少热变形提高精确度。
On precision machine tools, CNC machine tools, coordinate boring machines, grinding machine, machining centers and combination machine, can effectively reduce thermal deformation increase accuracy.
某产品天线组合钎焊后，局部发生熔化变形现象。
Local fusion deformation occurred after the product antenna combination was brazed.
本文的出发点是以篆刻艺术的眼光看待古玺中的文字的变形、美饰手段、组合方式和文字的排列方式（章法）。
The objective of this dissertation is to study ancient bullas as Seal Cutting Art on characters transformation, prettification, combination and the arrangement .
因为其性质可能以不同的组合出现，对真实体变形的描述是很困难的。
Just as the properties may appear in diverse combination, description of the deformation of real body often becomes very difficult to deal with.
拉索拱结构是大变形组合结构。
The combined arch and cable structure is a roof structure with large deformation.
应用数值计算方法，分析了偏心钻头底部钻具组合的受力和变形特性。
The mechanical properties and the deformation characteristics of the BHA with the eccentric bit are analyzed.
我的石头和他的柴刀的组合必须有一些魔力，它允许他变形入一个怪异版本的他自己。
The combination of my stone and his axe must have some mystical power as it allowed him to distort into a monstrous version of himself.
通过对区内标志岩层组合的系统追索，所确定的构造变形特征，对正确认识该造山带的形成演化具有重要地质意义。
Thedetermined structural deformation features through systematic tracing the marker bed in the area are geologically significant to correctly recognizing the formation and evolution of the orogen.
在数据较少或变形数据变化较大时，组合模型预测值明显优于单一模型预测值。
Under the condition of small and unstable data, the combined prediction value is superior to the single grey model.
研究顶板-煤体-底板所构成的组合煤岩体试样变形破裂规律及冲击倾向性对于预测冲击矿压具有非常重要的实践意义。
It is necessary to research into the burst failure and rock burst tendency of combined sample which is made up of roof, coal and floor.
最后，根据试验研究结果进行简化，提出组合板承载力和变形的实用设计方法，可供工程技术人员参考使用。
Finally, by simplifying the result of experiment, a practical design method about bearing capacity and deformation is got and can used by engineers.
在计算底部钻具组合的受力和变形时，以前一般都是按弯矩为零的条件来确定其上切点的位置。
The tangency point of Bottom Hole Assembly is located at where the drill string just touches the wall of the borehole, and the contact force is zero here.
对组合墙体抵抗水平剪力的变形特征进行了分析研究。
The deformation behavior of composite wall to resist horizontal load is analyzed in this paper.
针对圆锯片基体的适张处理，在考虑切削热影响的情况下，应用ANSYS对新型组合式金刚石圆锯片基体进行应力、变形分析。
For tensity disposal of saw blade, the cutting heat was considered when analysing the stress and deformation of the new combined diamond saw blade by applying ANSYS.
考虑下部钻具组合的弯曲效应和接触状态，运用间隙无法对下部钻具组合进行了受力变形计算。
The force and deformation of bottom hole assembly (BHA)are calculated by the gap-element method, in consideration for the bending effect and contact state of BHA.
简要分析大型储煤场的受力特性及各种工况组合下的内力、变形计算。
Additionally, mechanics characteristics of the large coal storage are analyzed, and its internal forces and deformations under various engineering conditions are calculated.
基于最大变形和累积耗能线性组合的双重破坏准则及破坏指标，对单自由度结构进行了倒塌分析。
Based on the double control damage criterion and index of the linear function of the maximum deformation and cumulative hysteretic energy, the collapse of the SDOF structures is analysed.
利用曲面拟合的方法，分析斜浪中甲板的变形规律，提出了扭转变形分析的分量组合方法。
Use curved surface fitting method, to analyze the rule of main deck's deformation in oblique wave; present method of sub value and combination to analyze torsion deformation.
推导了组合型密封环的压缩变形量及接触压力的计算公式。
The calculation methods of deformation and contact press force of sealing rings are derived.
索拱结构是大变形组合结构。
The cable arch structure is a roof structure with large deformation.
索拱结构是大变形组合结构。
The cable arch structure is a roof structure with large deformation.
应用推荐