样板现较多采用线切割加工。
对四轴联动数控线切割加工进行轨迹合成研究。
The paper studies the profile synthesis in the four axes simultaneous control wire EDM.
由于算法的简单、实用，很适于数控线切割加工编程。
With its simple, practical character the scheme is well fit for programing of NC wire cut machining.
找出了影响线切割加工质量的因素和提高加工质量的途径。
Found the factors input on the processing quality of cutting machine and ways to improve it.
微细电化学线切割加工是最近出现的一种微细加工新方法。
Wire electrochemical micromachining(WEMM) is a recent new method for micro-machining.
慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。
Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.
电火花线切割加工的表面粗糙度是衡量加工质量的重要指标之一。
The surface roughness in the wire cut of electric discharge machine work is one of the important parameters to measure the work performance.
开发了能实现复杂曲面零件电火花线切割加工的多轴联动加工系统。
In this paper, the motion rules of multiple spindle linkage motion in machining complex ruled curved surfaces by WEDM was analyzed.
研究了电火花线切割加工工程陶瓷的表面完整性及其淬火强化处理。
This paper attempts to study the surface integrity of WEDM engineering ceramics and their strengthening by quenching.
通过实例，介绍上、下异形零件的线切割加工工艺及编程具备的必要条件。
Taking an example, introduces the inevitable conditions in the wire cut plan and its program.
分析了板线内导体在利用数控电火花线切割加工中所遇到的工艺技术难题。
The core technique problems during wire cut electrical discharge machining in the inner conductor sheet were analyzed by this paper.
针对扩口器工件的特点进行了线切割加工工艺分析、工件校正及编程设计；
For a workpiece used in expanding the beginning of plastic pipe, We analyse the machining process, workpiece rectifying before machining, and design WEDM processing and its program.
钼丝的张力直接影响着钼丝的抖动幅度和频度，从而影响线切割加工的质量。
The tension of the molybdenum wire produces a direct effect on the range and the frequency of its vibration, thus affecting the quality of the wire cutting.
气中电火花线切割加工技术是近几年出现的一种新技术，它采用气体作为介质。
WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.
以一个椭圆齿轮为例，进行设计和线切割加工，得到由图形所确定的齿轮轮廓。
As an example, an elliptical gear was designed and processed in the linear cutting machine, the gear contour determined by graphics was obtained.
高速走丝电火花线切割加工过程中，电极丝有时会出现先有花斑后断丝的现象。
Indistinct pattern are sometimes found on the wire electrode wound regularly in reciprocating travelling WEDM.
本文基于电化学腐蚀原理，制备微细电化学线切割加工中使用的微米尺度线电极。
Based on electrochemical etching principles, the paper fabricated the micrometer scale wire electrodes used in WEMM.
研究了在大气和乳化液两种介质中，峰值电流对高速走丝电火花线切割加工的影响。
The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.
可实现在计算机上模拟显示线切割加工轨迹，从而可验证所编3B程序的正确性等。
Which can be used to display the cutting path of WEDM, so that the 3B mode program can be verified.
金属电化学线切割加工技术是利用电化学加工原理进行金属切割的一种新加工工艺。
Metal wire cut electrochemical machining (MWEM) technology is a new metal cutting machining method that based on the principles of electrochemical machining.
方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点，始终采用线切割加工方兜孔。
The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.
本品配成的乳化液具有较小的导电率用于线切割加工不易断丝，能保证加工正常进行。
This product is prepared from emulsion with smaller conductivity for wire cutting is not easy to break the wire processing, can guarantee the normal.
电火花线切割加工精度，主要指尺寸精度、形状精度、位置精度以及加工表面粗糙度。
The machining accuracy of WEDM means mainly the dimensional accuracy, accuracy of form, accuracy of position, and the surface roughness of cut surfaces.
分析了异形工件在进行线切割加工时出现开裂变形的原因，并制定了详细的预防措施。
The factors of craze and transfiguration are analysed when the workpiece is cutting by wire-EDM machine, at the same time, the particular preventive measures are proposed.
在现代电力电子技术基础上，开发出新型微能可控的微细电火花线切割加工脉冲电源。
Base on power electronic, a newly micro energy controlled pulse generator for MWEDM was developed.
开发了以新型翻转式自动分度数控回转工作台为核心的复杂曲面电火花线切割加工系统。
Taking newtype numerical control turntable as the core, a WEDM system for complicated surfaces was developed.
采用一般的脉冲电源对磁钢进行电火花线切割加工，不可避免地将引起充磁，造成排屑困难。
When the method of general pulse power of wire cut EDM is used, magnetic steel has magnetic property inevitably and it is difficult to evacuate.
对进一步提高微细电火花线切割加工精度，减少电极丝的损耗，降低加工成本具有一定意义。
The measures and solution for decreasing wire wear are proposed, which are significant to increase the precision of Micro-WEDM process, reduce the wire wear and cost of the machining process.
论述了基于曲线合成插补理论的反向合成插补理论，研制出直线和二次曲线切割加工控制程序。
A backtracking interpolation theory based on the synthetic interpolation theory was expounded, a controlling program used to cutting straight line and quadratic curve has been developed successfully.
设计了一套超声辅助电火花线切割加工的实验装置，并对复合加工的机理和特性进行了研究和探讨。
A set of experimental device that ultrasonic aided wire cut machining has been developed. and the mechanism and inherent nature of combined technology are explored and studied in deep going.
应用推荐