选择器系统在低负荷条件下能有效地控制污泥丝状菌性膨胀。
The aerobic selector process can control filamentous bulking efficiently under low F/M condition.
不间断电源(ups)通常作为重要负荷，如计算机、控制、监测系统的电源。
Uninterruptible power supplies (UPS) are often provided to supply power to critical loads such as computers, controls, and monitoring systems.
如何降低甩负荷时汽轮机组的动态超速始终是汽轮机控制系统设计的重要任务之一。
How to decrease the overspeed while the steam turbine suddenly lose full load is one of the important problems to design the control system of the steam turbine.
为了节能和优质供热，提出将负荷预报和预测控制施加于供热系统中。
This paper presents the application of heating load prediction and predictive control in the heat supply system for energy saving and high grade heat supply.
对空调系统进行冷负荷预测是对冰蓄冷系统进行优化控制的重要前提与基础。
Predicting the cooling load of air-conditioning system is the precondition and foundation of optimizing control of an ice storage system.
介绍了一种用于锅炉热负荷系统的复合控制器。
This paper describes a multiple controller for a boiler thermal load system.
应用该算法可以克服锅炉的大迟滞和大惯性，能够有效地提高协调控制系统响应agc负荷指令的速率。
Not only it, but also this algorithm can overcome the large lag and inertia for boiler and heightening the responding rate to AGC in boiler-turbine coordinated control system in effect.
所要控制的要素包括系统频率、联络线潮流、线路电流、设备的负荷和电压。
The elements to be controlled include system frequency tie line flows line currents equipment loading and voltage.
电厂负荷和发电机控制系统的复杂性限制了精确解析方法在励磁涌流研究中的应用。
Because of the complexity of the load and the control systems, the quantitative analysis method is not suitable for the problem solving.
提出了一个实现大范围负荷跟踪的火电单元机组智能控制系统。
This paper proposes a power unit intelligent control system implementing wide range load tracking.
因此，模型可实际用于建筑能耗分析、空调系统负荷计算、运行管理及动态控制。
Thus, the model is applicable to building energy consumption analysis, load calculation, operation management and dynamic control of air conditioning systems.
实际运行证明，自动变负荷控制系统运行效果较好。
The practical operation proves that the automatic variable-load control system works well.
负荷控制是保证船舶推进系统在动态工况下保护主机的有效手段。
Load control is an efficient method to ensure good protection of the main engine by ship propulsion system in dynamic working state.
电力系统负荷预测是电力系统运行、控制和规划不可缺少的一部分，是电力市场技术支持系统的基础。
Power system load forecast, which is the base of power market technique supporting system, is an essential part of power system operation, control and planning.
合流制排水系统溢流调蓄技术是控制面源污染、削减污染负荷的一项关键技术。
The storage technology of combined sewerage overflow is a key technology to control the surface pollution and cut pollution load.
介绍了一种微机双绕组变压器负荷经济运行控制系统的基本工作原理、硬件结构框图和主要技术特点。
The basic working principle, hardware structure and main technical features of a micro computer based control system for transformer economic operation is presented in this paper.
文章针对单元机组负荷控制的特点，采用最优预见控制（OPC）策略设计了基于多变量预见控制原理的单元机组负荷最优预见控制系统，并讨论了预见步数对控制品质的影响。
This paper designed a multivariable load Optical Preview Control (OPC) system for a thermal power unit, and discussed the effect of preview step number on control performance of the load OPC system.
其次对模糊理论及模糊控制进行了综述，接着介绍了电解清洗线计算机控制的系统设计，并设计了刷辊的电流负荷模糊控制系统。
Secondly, fuzzy theory and fuzzy control is introduced generally. Then, the computer control system of electrolytic cleaning line and brush roll motor current load fuzzy control system are designed.
针对常用控制方法对负荷保持系统产生的缺陷，采用模糊控制思想，利用PW M脉宽调制技术，达到了很好的控制效果。
Due to usual control methods making defects to retainable load system, fuzzy control with PWM is adopted, which has reached good control results.
本文的研究目的是立足于低压配电系统或工业负荷补偿，且控制方法采用直接电流控制的静止无功发生器的研究。
Based on the low-voltage distribution system or load compensation for industry, the aim of the thesis is to study the SVG that adopts direct-current control.
本文主要论述了球磨机负荷控制系统数学模型的建立与应用。
The research and application of the load-control system were studied in this article.
实践证明，该方法简单易行，解决了控制系统中负荷分配不均的问题。
The practice showed that this method was simply practical and overcome the variance of load distribution.
介绍了仪表控制系统的供电原则及仪表控制系统的负荷分配方案。
This article introduces the instrument control systems power supply and its relative load distribution plan.
数字式电液调节系统(DEH)是控制汽轮机运行的核心，其负荷调节系统控制性能的优劣直接影响整个机组的正常运行。
Digital electro-hydraulic control system (DEH) is the core of turbine control system, then the performance of load control system determines whether the unit can run better.
高纯盐酸控制系统能实现自动点火，自动调节生产负荷， 在线控制产品质量，自动联锁保护等优点。
This system can make automatic ignition, automatic interlock, automatic regulate work load, meanwhile it can control the product's quality.
将该控制器应用于锅炉的单元机组负荷控制系统中，实现了对非线性和大时滞系统的自适应控制。
While the controller is applied to controlling system about unit load of boiler, adaptive control of nonlinear big-lagged system is realized.
该项研究对操纵负荷系统的性能分析及利用PID控制方案设计控制系统具有一定的参考价值。
This study provides a reference for analyzing performance of control load system and applying PID control project to design control system.
多机集中控制：用一台集中控制器可以对多台主机进行集中控制，根据系统负荷及个单元运行时间决定主机工作状态。
Multi-centralized control: The controller can be a focus of many central control console, according to system load and run-time units decide the host job status.
结果表明：在大范围的负荷变化时，控制系统仍具有满意的控制效果。
Results show that the proposed algorithm exhibits satisfying control effects even for large load varying ranges.
结果表明：在大范围的负荷变化时，控制系统仍具有满意的控制效果。
Results show that the proposed algorithm exhibits satisfying control effects even for large load varying ranges.
应用推荐