通过控制适当的工艺参数，采用喷雾干燥法成功制备了VAE类可再分散聚合物粉末。
One kind of VAE redispersible polymer powders were prepared by the method of spray drying with fit technical parameters.
目的粉末直接压片法研究制备头孢克肟片。
OBJECTIVE Study on preparing cefixime tablets with direct compression method.
粉末实体发泡法泡沫铝制备工艺包括混合、压制和发泡三个过程。
Powder compact foaming process for producing aluminum foams consists of mixing, compacting and foaming.
本文针对稀土氧化物超微粉末的研制，提出较好的制备方法：沉淀转化法和喷雾热解法。
Deposition inversion and pulverization pyrolysis are the better preparation methods on the study of rare earth oxide ultra micro powder.
采用柠檬酸盐凝胶自燃烧法成功制备出了磷酸氧钛钾(KTP)纳米晶粉末。
Potassium titanyl phosphate (KTP) nanocrystalline powders were successfully synthesized by auto-combustion of nitrate-citrate gel.
并综述了功能梯度材料目前常采用的一些制备方法及使用情况，包括火花等离子烧结技术、粉末冶金法、离子结构工艺等。
And, some preparation methods of FGM and their applications are dealt with, including spark plasma sinter technology, powder metallurgy method and plasma structure craftwork.
采用化学共沉淀法，通过加入分散剂，制备了团聚程度低、结晶度完好、具有较好磁性能、不同组成的锰锌铁氧体粉末晶体。
The homogeneous low-agglomerated and well crystallined MnZn ferrite powder with good magnetic properties were prepared by coprecipitation method and adding dispersant.
方法粉末直接压片法制备含渗透活性物质的片芯，滚转包衣锅法分别包溶胀层和控释衣层。
Methods Core tablets containing osmotic active agent were prepared by direct compression and spray coated with swelling layer and semipermeable membrane subsequently.
应用流态化-动态悬浮沉降干法分级新工艺制备的分级钨粉，采用薄料层静态法，对粉末体氧化动力学进行了研究。
Using the thin layer static method, the oxiding kinetics of W powder have been studied. The powder for study is classified by fluidized new technique.
采用固体粉末包埋渗铝法，在K438高温合金表面制备渗铝涂层。
The aluminized coating on K438 superalloy was prepared by pack cementation.
本文基于化学反应沉淀法的基本原理，通过设计不同的工艺路线和工艺条件制备硫化锰微细粉末。
Based on fundamental of chemical precipitation, the superfine manganese sulfide was prepared by designed different technologies and conditions.
本文将热喷涂法与机械球磨法相结合，提出一种新的超细铜锌粉末的制备方法。
The methods of thermal spray and mechanical ball milling are combined in this paper and a new method of preparation of Cu-Zn ultrafine powders is brought forward.
本文将热喷涂法与机械球磨法相结合，提出一种新的超细铜锌粉末的制备方法。
The methods of thermal spray and mechanical ball milling were combined in this paper and a new method of preparation of ultrafine Cu-Zn powder was brought forward.
溶胶-凝胶法是一种有发展潜力的制备方法，采用溶胶-凝胶法可获得纯度高、粒度细的优质硬质合金粉末，可解决传统的CVD、PVD等涂层结合力不高的问题。
Sol-gel technology is an appealing preparation method. Using the method, fine and high purity powder can be prepared, higher binding force than CVD and PVD coatings can be achieved.
目的粉末直接压片法研究制备头孢克肟片。
将聚丙烯腈粉末用碱水解，所得到的产物分别用外加交联剂法和热交联法交联，制备高吸水性树脂。
The polyacrylonitrile powder was hydrolyzed in a caustic solution. The obtained product was treated by either crosslinking or adding an external crosslinking agent to produce the absorbent resin.
激光诱导气相沉积法是制备纳米氮化硅粉末的主要方法之一。
Laser induced chemical vapor deposition is the main method among the methods of fabricating nano Si3N4.
目前钛酸锶粉末的制备方法主要有：高温固相烧结法、水热法、化学共沉淀法、溶胶-凝胶法等。
The methods of preparing SrTiO_3 powders include solid-state method, co-precipitate method, sol-gel method, hydrothermal method, etc.
采用低成本高效率的湿陶瓷粉末法结合共烧结法成功制备了阳极支撑型固体氧化物燃料电池。
A low-cost and high-efficiency technique, namely, wet ceramic powder process in combination with co-firing, is developed to fabricate anode-supported solid oxide fuel cells(SOFCs).
它还配以适量稀释剂、助剂，采用喷雾干燥法、冷冻干燥法及直接混合法制备得到注射用无菌粉末。所述的方法不同其处方也不同。
Besides, said sterile powder for injection also can contains proper quantity of diluent and adjuvant, and is made up by adopting spray-drying process, freeze-drying process and direct mixing process.
它还配以适量稀释剂、助剂，采用喷雾干燥法、冷冻干燥法及直接混合法制备得到注射用无菌粉末。所述的方法不同其处方也不同。
Besides, said sterile powder for injection also can contains proper quantity of diluent and adjuvant, and is made up by adopting spray-drying process, freeze-drying process and direct mixing process.
应用推荐