氮气雾化法生产铝粉具有细粉率高，铝粉活性好，球形铝粉成型率高，生产安全等优点。
Nitrogen atomization method has the following privileges: high percent fine powder, good activation and shape, production safety etc.
探讨了一项利用激光快速成型技术、胶模成型技术、陶土粉成型技术制造PD C钻头烧结模具的新工艺。
This article introduces a new manufacture process of the sintered mould for matrix PDC bits by using laser rapid modeling technique, rubber mold forming technique and kaolin powder modeling technique.
分析了主要工艺参数如：激光功率、扫描速度、送粉量以及Z轴增量对成型质量和形貌的影响。
The technics parameters, such as the laser power, scan velocity, powder feed rate and the Z axis increment, which influence quality and shape were analyzed in this article.
对中性亚硫酸钠-蒽醌法杨木蒸煮废液(NS - L)和碱性亚硫酸钠-蒽醌法落叶松蒸煮废液(AS - L)做锌矿粉的成型粘合剂进行了研究。
Aspen neutral sulfite-anthraquinone pulping waste liquor (NS-L) and Larch alkaline sulfite-anthraquinone pulping waste liquor (AS-L) are used as the adhesive for the forming of zinc ore powder.
喷雾干燥粉料成型性与其团聚态结构和强度有着密切关系。
Moulding characteristic of SD powder has a close relation with the structural state and the strength of agglomerates.
粉料经预模压后冷等静压成型，能得到均匀致密的陶瓷坯体。
The ceramic green was shaped by pressing and cold isostatic pressure, then an uniform and compact ceramic green was produced.
湿法成型在降低粉体团聚、改善素坯显微结构均匀性方面有着明显的优势。
The wet forming method has great advantage in reducing the agglomerates and improving the homogeneity of powder compacting materials.
简单描述了颗粒洗衣粉的成型技术。
This paper describes the moulding technique of the pellet detergent.
与现有技术相比，具有生产能力高，生产过程无断丝、收缩、扭转等现象，生产的粉芯丝材成型效果好，表面光滑等优点。
Compared with the prior art, the mechanical device has no phenomena of wire breaking, contraction, torsion, and the like and has the advantages of high production ability, good molding effect, etc.
本文讨论了摇摆滚塑成型中粉料粒径大小、工艺条件等对产品性能、内部结构、氧化物的存在及诸因素的影响。
The influences of powder particle diameter and processing conditions upon the factors like product property, inner structure and existence of oxide in rotational molding processing were discussed.
本机用于桃酥饼干辊印脱模成型，将调粉机已调好的面团经辊印，成各种形状及不同克数的饼干生坯。
This machine is used for stripping roller which makes semi-finished biscuits, will adjust molding machine has prepared by roller, dough into various shapes and different.
实验中研究了硅藻土与熔块釉粉之比对试样的吸、放水率，吸、放湿气率等的影响；并且探讨了改性剂、成型压力以及保温时间对吸、放水率等的影响。
The effects on water-absorption and water-desorption of the mixture ratio of diatomite powder and frit particles as well as modifiers, forming pressure and soaking time were studied.
过滤后的溶液浓缩为硫酸铵副产品。粗碳酸锶细粉加助剂成型，高温煅烧、浸煮、过滤、碳化、干燥得纯度为97％以上的碳酸锶。
Through moulding by adding assistant, high temperature calcination, soaking and digestion, filtration, carbonization and drying, strontium carbonate of 97% over purity is produced.
激光三维快速立体成型已成为新的研究热点，送粉器是激光三维快速立体成型技术中的关键技术。
Laser three-dimensional shaping is a new research hotspot, and powder feed unit is the key to this technology.
论述了粉体性能、压制工具在技术陶瓷成型中的主要作用，阐述了各种缺陷的产生原因和克服方法。
The main effects of pressing powders and compactors in forming technical ceramics were discussed, and the reasons of the defects and the ways to solve them were put forward.
对粉料的团聚行为和团聚对成型、烧结的影响作了深入的研究。
The agglomeration behavior of powder and the effect of agglomeration on compaction and sintering were studied in detail.
用途与性能本机用于桃酥饼干辊印脱模成型，将调粉机已调好的面团经辊印，成各种形状及不同克数的饼干生坯。
Purpose and performance This machine is used for stripping roller which makes semi-finished biscuits, will adjust molding machine has prepared by roller, dough into various shapes and different.
以洋葱粉和马铃薯淀粉为主要原料，从原料的配比和成型条件等方面对洋葱脆片的制作工艺进行了研究。
The processing technology of Fried onion chips was studied from the ratio of raw materials to forming conditions using the onion flour and potato starch as the main raw materials.
粉体制备，粉体处理如研磨和混合，成型，涂层技术，烧结。
Powder preparation, Powder treatments like milling and mixing, Forming into a green shape, Coating techniques, Sintering.
对墙地砖成型粉体在压制过程中的应力与应变进行了分析并且提出了几种成型粉体的流变模型。
The stress and strain of forming powder of wall ground tile in compacting process are analysed in this paper and several rheological models of forming powder are put forward.
研究探讨了以竹材加工剩余物粉炭、淀粉为原料制造棒(块)状成型炭的工艺过程和成型条件。
This paper studied and discussed the technological process and moulding condition of long (lump) moulding charcoal with biological substance and starch.
前言： 对影响锰粉矿冷压球团的主要工艺参数进行了试验，研究了粘结剂、成型压强、物料配比与球团的关系。
The author tells of main technical paramenter of cold-pressing ball, including some glue, typed pressure and the relationship between materials rate and balls.
该涂料由树脂液、负离子粉等材料配制而成，将该涂料涂布在卷烟高透成型纸上或喷洒在丝束上制成嘴棒。
This dope is made by colophony liquid, minus ion powder and other materials, besmearing this dope on the cigarette high-penetrated molding paper or spraying in the silk ties to make the mouth stick.
系统研究了激光功率、扫描速度、预热温度、铺粉厚度等工艺参数对成型试样质量的影响。
The effects of different process parameters such as laser power, scanning speed, preheat temperature, powder-bed depth on the sintered quality were studied systematically.
简述了基于同步送粉器的金属直接成型系统工作原理；
This paper introduces the basic Work principle of directly metal forming system by laser cladding with a synchronous feeder.
超细石英粉经热压成型(HP)制成红外陶瓷材料，工艺简单，原料成本低。
Infrared ceramics material is prepared using HP ultrafine quartz powder in a simple process and at low cost.
介绍了在VC悬浮聚合中添加碳酸钙填料和热稳定剂，合成可直接用于加工成型的PVC专用粉料的开发工作。
By adding calcium carbonate filler and thermal stabilizer in the VC polymerization processing, PVC special-use resins ready for processing were synthesis.
本文通过转动成型法对5a分子筛原粉进行成型，研究了影响催化剂颗粒强度的因素。
In this paper, the powder stock of 5a molecular sieve was formed by method of rotational forming and factors influencing particle intensity of catalyst were studied.
该粉具有良好的流动性及快速填充性，可直接用于干压成型。
This powder is of well flowing property and fast-packing property, and can be directly made into shape by dry compaction.
将CBZP系列粉体干压成型，用无压烧结制成CBZP系列陶瓷，研究了烧结条件对致密化程度及其力学性能的影响。
The ceramic of CBZP series were made by pressing and sintering, the affection of sintering conditions to mechanic character were investigated.
应用推荐