简要介绍了等离子点火机理和等离子发生器工作原理。
Briefly introduced the plasma ignition mechanism, the plasma generator principle of work.
可根据客户要求配备美国原装进口海宝等离子发生器和国产等离子发生器；
It could be equipped with Hypertherm plasma generator imported from America and plasma generator made in China as required by users;
它主要由切割平台系统、电脑控制系统、等离子发生器和专用套料软件组成。
It consists of a cutting table, a computer-based control system, a plasma generator and special software.
用湍流扩散燃烧的简单概率密度函数模型对等离子发生器燃烧流场进行了数值模拟。
Uses turbulence diffuse combustion and simply PDF model to numerical simulation plasma generator combustion flow.
采用涡耗散概念（EDC）模型，对等离子发生器内三维湍流燃烧流场进行数值模拟。
The eddy-dissipation-concept (EDC) model is used to simulate the three-dimensional combustion process in a plasma generator.
为了获得比较均匀的大面积直流电弧等离子流，设计了一种利用外磁场驱动电弧旋转的等离子发生器。
In order to obtain a more uniformity flow of the dc arc plasma, the large-scale arc hollow electrode plasma generator with an outer magnetic field is designed in this paper.
研制了用于尾气净化的低温等离子体催化反应器，该反应器由介质阻挡放电型低温等离子发生器和金属蜂窝载体催化剂组成。
Cold plasma-catalytic reactor for exhaust purification was developed, where the reactor was consisted by two parts including dielectric barrier discharge system and metal honeycomb substrate catalyst.
本文在对等离子发生器内部纯空气流场的模拟过程中，分析了不同进口气流角、不同进口总压以及不同气流压缩角对发生器电极壁面温度的影响。
The article analyses the influence to the generator electrode temperature from different inlet Angle and inlet total pressure and the compressive Angle of fluid in the situational process.
试验装置是由等离子体发生器、半密闭爆发器本体和一个专用螺栓以及其他附件组成。
The experimental set-up consists of a plasma generator, a semi-closed vessel, a special bolt with a blowout disk and other accessories.
但是目前EHD等离子体发生器的能量转化效率仍然很低。
However, until now the converting efficiency of EHD plasma actuator is quite low.
介绍一种新型的毛细管等离子体发生器电源系统的工作原理并计算了电流波形。
The principle of power supply system of capillary plasma generator is introduced and the waveform of power is calculated.
在电热化学发射中，等离子体发生器的放电过程是电能转化为热能的重要阶段。
Discharge of plasma generator in electrothermal launchers is a main process of converting electrical energy to heat energy.
消融毛细管等离子体发生器是电热化学发射系统中重要的组成部分。
Ablation capillaries plasma generator is a basic composition element in an electrothermal launching system.
文摘：论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。
Abstract: The working principle, structure and parameters design of plasma arc generator for heat treatment are described.
本文对脉冲等离子体发生器等离子体射流产生及其膨胀特性开展了实验研究，并对射流膨胀过程进行了数值模拟。
The discharge and jet expansion characteristics of the pulsed plasma generator are investigated, which is beneficial to study the dynamic characteristics of transient pulsed plasma.
本文对脉冲等离子体发生器等离子体射流产生及其膨胀特性开展了实验研究，并对射流膨胀过程进行了数值模拟。
Experimental studies of the generation and expansion processes of a pulsed plasma generator are conducted, and the jet expansion process is simulated numerically.
论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。
The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.
探讨了电弧等离子体发生器的静态伏安特性以及气体流动状态对等离子体发生器热效率、热焓的影响。
Static characteristics of arc plasma reactor and the influence of flowing gas state on the thermal efficiency and stagnation enthalpy of plasma torch has been investigated.
从热特性、电特性、焰流速度和燃烧稳定性的角度分析了发生器中等离子弧的特征。
It analyses the plasma electrical arc characteristic from the thermal and electrical characteristic and flame flow rate and the burning stability.
该等离子体发生器是一种以等离子体作为二次线圈的变压器。
Plasmatron is a transformer in which plasma serves as a secondary coil.
等离子体诊断技术和等离子体发生器的研制是等离子隐身技术的两项关键技术。
Diagnosis of plasma and manufacture of the plasma production are two key technologies of the technologies of plasma stealth.
本文介绍了电热炮的基本原理、实验装置结构、等离子体发生器和发射实验结果。
The basic principle of ET gun, its experimental device and the experimental results are described in this paper.
带喷流再入假目标是战略导弹弹头突防的一种重要手段，电子密度及其分布是等离子体发生器实现飞行器隐身的关键。
Reentry bait with cascade is an important means of strategic missile-warhead penetration . Eletron consistence and their distribution is the sticking point of the plasm production implement.
GEET燃料处理器是一种自我诱导等离子体发生器。
The GEET Fuel Processor is a self-inducing Plasma generator.
在单管射流电极和阵列式射流电极的放电实验中，从电压、流速等方面讨论了两种等离子体发生器的放电特性。
In the discharge created by single pipe cylinder-ring plasma jet electrode and array jet electrode, important factors of discharge, such as waveform of applied voltage and flow rate, are studied.
在高热流条件下电热毛细管材料的消融过程中 ，会形成壁面蒸气罩效应 ，这种等离子体壁面蒸气罩特性对消融控制电弧发生器的工作性能非常关键。
While the capillaries materials are being ablated under the high heat fluxes condition, vapor shield often occurs near the inner wall, which could help control the surface being eroded furthermore.
在高热流条件下电热毛细管材料的消融过程中 ，会形成壁面蒸气罩效应 ，这种等离子体壁面蒸气罩特性对消融控制电弧发生器的工作性能非常关键。
While the capillaries materials are being ablated under the high heat fluxes condition, vapor shield often occurs near the inner wall, which could help control the surface being eroded furthermore.
应用推荐