导出了变截面梁单元的单元刚度矩阵、单元等效节点荷载和单元一致质量矩阵。
The stiffness matrix, equivalent nodal load and consistent mass matrix are derived for the beam element with variable cross-section.
该法将虚位移原理推广应用于有限单元的节点，从而得到用以描述局部电磁力分布的等效节点力。
The distribution of local magnetic force is described with an equivalent node force, which is derived from an extended application of virtual work principle to FEM node.
针对工程结构中广泛应用的变截面构件，提出了一个变截面平面梁单元，推导了其单元刚度矩阵和等效节点荷载公式。
A nonuniform beam finite element is presented and the element stiffness matrix and equivalent joint load are derived to analyse nonuniform members used increasingly in engineering structures.
根据刚度等效的原则，将板等代为正交密肋体系，板上荷载转化为等效节点荷载，可利用通用结构分析软件对受复杂荷载作用的板作精确分析。
According to the principle of equivalent rigidity, the slab is analogic to closely spaced beams, and the loads upon the slab can be transformed to equivalent nodes load of beams.
本文提出的解析-数值混合解法，为分析此类问题提供了新的途径。首先，在作者所建议的力学模型的基础上，建立轴销的柔度方程和孔边等效节点载荷的解析表达式。
The analysis is based on the model presented by the authors, and therefore the flexibility equation of the pin and the formulae of equivalent nodal forces of the hole are developed.
不存在用于File节点的等效批处理属性。
There is no equivalent batching property for use with the File nodes.
SOAPReply节点需要的等效设置如下面的示例所示。
The equivalent Settings required for a SOAPReply node are shown in this example.
这个新节点与下面的HTML等效。
通过将分发模式设置为all并输入两个或多个总是解析为真的路由决策，该节点可以提供等效于FlowOrder节点的行为。
By setting the distribution mode to All and entering two or more routing decisions that always resolve to true, this node offers equivalent behaviour to that of the FlowOrder node.
在此情况下，通常使用队列管理器别名来实现节点等效性，但是总体效果仍然是在其队列管器的上下文中解析队列。
In this case, a queue manager alias is typically used to achieve node equivalence, but the overall effect is still that the queue is resolved in the context of its queue manager.
提出了一种按分支节点完全等效解耦的配电网故障定位新方法。
A quite equivalent decoupling method based on branch node for fault location in distribution network is presented.
给出一种计算简单电路指定节点之间的等效电阻的方法。
This article provided a new method to calculate the values of resistance between the assigned nodes in simple circuits.
标识转换将源中的每个节点复制到输出以提供逻辑等效树。
The identity transformation copies each node in the source to the output to provide a logically equivalent tree.
应用有限傅立叶变换，导出两套不同阻值电阻组成的平面正方形无限网络任意两节点间等效电阻的积分表达式。
The effect resistance between two arbitrary nodes in an infinite square lattice with two binds resistors is calculated using the finite Fourier transformation.
还给出了常见非节点荷载的等效荷载公式。
Furthermore, the formulas of calculating the equivalent nodal loads of common non-nodal loads were also given.
本文根据静力学完全等效原理提出一种精确数值解法，并对余弦分布的轴承负荷转为节点力的解法作了具体的数学推导，得出了精确数值计算公式。
Based on the equivalent theory of statics this paper presents an accurate numerical method and accurate numerical formulas for calculating the bearing load distributed by cosine curve law are derived.
本文采用静力等效原则，以获得等效开挖释放节点力。
The static equivalent principle was used in order to obtain the equivalent nodal forces by excavating release.
论文分析了含受控源电路的等效变换，给出了应用节点分析法处理受控源电路的解题方法。
This paper analyses the equivalent change of controlled source in circuits and gives an method for handling con-trolled source networks in node analyses.
依据等效电路的节点导纳方程，采用弦截法分析了自励感应发电机的稳态特性。
According to the nodal admittance equation, the analysis of steady state performance of self excited induction generators is carried out by using the secant method.
在此基础上，提出了无源线性网络任二节点间的等效参数的一种简便算法。
On this foundation, a simple method of calculation about the equivalent parameter of the linear network without sources is brought forward.
等效附加应力法根据附加节点力计算方法的不同分别对应整体式和组合式方法。
Equivalent additional stress method can be the same with integral method or combined method depending on the equivalent method of additional nodal force calculated.
通过研究拟静力试验所得的滞回曲线求得该节点的等效阻尼比，并以此衡量它的耗能能力。
With the hysteretic hoops acquired from the experiment, the effective damping ratio of the joint, with which its energy dissipation can be weighted, was calculated.
采用加权残余法建立了静电驱动梁单元的节点法模型，在HSPICE中构建了相应的等效电路模型。
A nodal analysis model of electrically actuated microbeams was developed based on a weighted residual method.
采用加权残余法建立了静电驱动梁单元的节点法模型，在HSPICE中构建了相应的等效电路模型。
A nodal analysis model of electrically actuated microbeams was developed based on a weighted residual method.
应用推荐