它们的作用，是调节离子流入细胞的流量。
And what they do is they regulate the influx of ions across that cell.
木文对热灯丝cvd沉积金刚石膜的核化过程进行了分析，从理论上研究了负衬底偏压增强活性离子的流量。
In this paper, the nucleation process of diamond by filament CVD was analyzed, and enhanced flux of ions by negative substrate bias was investigated in theory.
现在的等离子弧切割机大多靠气体压力来控制流量，因为当枪体孔径一定时，控制了气体压力也就控制了流量。
Now the plasma arc cutting machine part on gas pressure to control the flow, because when gun aperture, the gas control certain pressure and you control the flow.
本文对热灯丝cvd沉积金刚石膜的核化过程进行了分析，从理论上研究了负衬底偏压增强活性离子的流量。
In this paper, the nucleation process of diamond by filament CVD was analyzed, and enhanced flux of ions by negative substrate bias was investigated in theory.
研究小组下一步需要揭示负责调节血流量的肌细胞如何检测到细胞外钾离子的增加。
The team next needed to uncover how the muscle cells responsible for determining blood flow in the blood vessel sense an increase in external potassium.
原因是由氯化钠引起的离子强度的增大导致了药物活度的下降，进而致使稳态流量减小。
The decrement of the steady state flux was attached to the change of thermal activity of on and the existence of ion competition.
脑血流量的局部损害限制能量底物(特别是氧和葡萄糖)的传递，造成维持离子浓度梯度所需要的能量受损。
Focal impairment of cerebral blood flow restricts the delivery of substrates, particularly oxygen and glucose, and impairs the energetics required to maintain ionic gradients.
结论：预防性吸入空气负离子可增加耳蜗血流量，改善微循环，因而对保护噪声性耳蜗损伤是有益的。
Conclusion: Prophylactic inhalation of negative air ions can increase the cochlear blood flow and promote microcirculation thus protecting the cochlea from acoustic trauma.
虽然离子气流量的变化对穿孔熔池的孔径影响较小，但对熔池金属的流动性和焊缝成形影响较大。
The variation of the plasma gas flow can heavily influence the fluidity of the puddle metal and the weld formation though the diameter of the keyhole is hardly changed.
本文主要探讨了屏蔽气氧气流量变化时对该新光源背景发射光谱及某些元素的原子线、离子线发射的影响。
The effect of O 2 flow rate on the background emission and some atomic and ionic lines in the new source is exploited in this paper.
对二氧化硅反应离子刻蚀中反应室压力，刻蚀气体流量和射频功率等因素对刻蚀速率和刻蚀均匀性的影响进行了研究。
The influence of chamber pressure, gas flow rate and RF power on micro loading effect in reactive ion etch of silicon dioxide is researched.
发现焊接电流、离子气流量和焊接速度对收弧过程影响较大。
The welding current, welding speed and the plasma gas flow rate were the most important parameters in the ending stage.
通过对离子膜烧碱生产线工况条件分析，提出了在浮子流量计结构中增加阻尼装置等措施。
This paper advanced how to add damping equipment among the structures of metal tube rotary flow meter according to analyses the working condition of production line of ion exchange soda.
研究结果表明通过适当提高进气流量、提高混合气体中的氮气或氢气含量和减少喷枪通道长度，均能提高等离子喷枪热效率。
The results show that the thermal efficiency of the torch increases with the increase of the gas flow rate, the nitrogen or hydrogen content and decrease of the length of torch.
研究了电弧功率、喷涂距离和等离子气体流量对涂层显微组织和性能的影响。
The effects of the plasma power, spraying distance and plasma gas flow rate on the microstructure and properties of the coatings were investigated.
通过试验证明，严格控制焊接电流和离子气流量，可以对焊缝成形进行有效控制。
Through experimental measuremnet, the optimum current and gas flow rate for strictly controlling the bead forming process are found out.
血浆高速等离子弧切割技术工程热金属削减部分熔融，并与高流量同样会被熔化的金属吹走，形成一个狭窄的切口。
High-speed plasma arc cutting technology plasma engineering hot metal cutting, and partial melting with high flow will also be the molten metal blow, form a narrow incision.
当一个低载气流量报警出现有30秒时，等离子体或者TCD关闭。
When a "Low carrier flow" alarm remains active for 30 seconds, turns the plasma or TCD off.
单体流量是影响等离子体聚合沉积过程的重要宏观参数之一。
Monomer flow rate has been referred as a key parameter in the preparation of plasma polymer films.
结果表明：天然气在氮热等离子体中热解反应强烈，其转化率主要由输入功率和甲烷流量决定，产品的选择性亦即乙炔的收率与反应器的结构密切相关。
Results show that the conversion rate of methane is mainly determined by plasma power and methane flow rate, the product selectivity is sensitive to reactor configuration.
以氯化钠中氯离子作为反应的转化率指标，研究了温度、硼酐与氯化钠摩尔配比、蒸汽流量及反应时间改变对反应的影响。
Some reaction conditions, which include temperature, molar ratio of B_2O_3 to NaCl, and flow rate of water vapor, were studied.
过小的气体流量则使等离子弧失去应有的挺直度而使切割的深度变浅，同时也容易产生挂渣；
The too small gas flow makes plasma arc lost due to the degree and straight cutting depth becomes shallow, but also easy to produce hang slag;
提高等离子氮流量、增强搅拌、延长精炼时间，钢中含氮量增加。
The results show that increasing the nitrogen rate as plasma arc gas, higher stirring intensity and longer alloying time, the nitrogen content in steel is also increased.
实验证明利用等离子体技术去除室内空气中的挥发性有机物，在合适的流量和较高的放电电压下，可以达到90%以上的去除效果。
The experiment indicated that plasma technology has excellent effect to remove indoor VOCs, and can reach more than 90% on condition of proper flux and stronger discharging voltage.
实验证明利用等离子体技术去除室内空气中的挥发性有机物，在合适的流量和较高的放电电压下，可以达到90%以上的去除效果。
The experiment indicated that plasma technology has excellent effect to remove indoor VOCs, and can reach more than 90% on condition of proper flux and stronger discharging voltage.
应用推荐