在磨粒磨损理论模型的基础上，揭示了砂带的磨损机理。
The wear mechanism of belt wear was revealed based on a model of abrasive grain's wear.
利用接触疲劳磨损理论讨论激光熔覆试样的疲劳磨损寿命问题。
This paper discusses wear life of laser cladding samples with the aid of the theory of contact fatigue wear.
基于磨损表面的分形表征、经典接触理论和磨损理论，建立了磨合磨损预测分形模型。
Based on the fractal characterization of worn surfaces, classical contact mechanics, and wear theory, a fractal model for predicting wear during the running in process was developed.
长期以来，我国城市轨道交通车辆设备维修主要采取的是基于磨损理论的定期维修模式。
For a long time, the equipment maintenance modes of urban railway car equipment in our country adopted periodic maintenance which is based on wear theory.
根据磨损理论，产生磨损的主要因素为设备本身材质、物料性能、所处环境和输入能量这四种。
Based on the abrasion theory, material quality of equipment itself, materiel performance, circumstance and input energy are the four factors that cause abrasion.
根据实验结果并结合前人的工作，分析了韧性金属材料的冲蚀机理，提出了一个相应的冲蚀磨损理论模型。
Based on work done by the author and others, a theoretical model is proposed for erosion of metals.
在对M - B接触分形模型改进的基础上，根据阿查得粘着磨损理论导出了基于分形参数的粘着磨损模型。
An adhesive wear model based on fractal parameter is derived on the grounds of adhesive wear theory by modifying the M-B fractal contact model.
根据推力轴承磨损规律和可靠性理论，导出了推力轴承磨损的可靠寿命计算的数学模型。
Based on the wear law and reliability theory of the thrust bearing, the mathematical model of reliability life calculation on the wear of the thrust bearing is derived.
本文以图像分析理论为基础，针对切屑形态识别和刀具磨损检测进行了研究。
In this paper based on image analysis theory the chip shape recognition and tool wear inspecting were analyzed and studied.
根据耗损失效产品的渐发性故障模型，应用稳定磨损阶段的理论，提出了一种延拓试验方法。
Based on the gradually appeared failure model of wear-out failure, an extended test method is developed with the help of the stable wear stage theory.
通过理论分析和试验研究，探讨硬质合金刀具在变速切削条件下磨损累积的规律。
With theoretical analysis and experimental research, the regularity of wear cumulation of carbide tools under varying cutting speed conditions is studied.
它的广泛报导集中在磨损的关键理论和实践考虑。
Its comprehensive coverage focuses on key theoretical and practical considerations of abrasive wear.
为了更好地研究现代刀具，将分形理论引入刀具磨损研究。
The fractal theory is introduced into the wear investigation of cutting tool for studying the modern tool.
通过对汽车离合器的工作条件和磨损性质的分析，提出了一种采用理论计算来预测汽车离合器使用期限的方法。
By analysis of working conditions and wear performances of automotive clutch, the method of predicting automotive clutch service life by a theoretical calculating is proposed.
为斜盘泵滑靴磨损故障程度的影响因素分析及液压泵健康状态评估方法的研究奠定理论基础。
This study establishes a theoretical basis for the analysis of the degree of slipper wear factors and the research of hydraulic pump's health status assessment.
文中介绍了设备的磨损及经济寿命的理论和计算方法以及设备的大维修、更换、技术改造等更新方法的决策。
It introduces the theories and calculating method of abrasion as well as economic life for equipment. And the overhaul, renew, Technological transformation for the decision of equipment renewing.
刀具磨损在生产实践中和在理论上都是十分重要的课题。
In practical machining operations and in theory the tool-wear is an important problem.
通过严密的理论推导，得出了不同粉尘浓度条件下发动机的磨损与空气滤清器滤清效率的经验公式。
In this study, an empirical equation is derived which describes the relationship between engine wear and air cleaner efficiency under different dust con-centrations.
基于该理论，通过研究磨屑群的特征，就可以推测机器所处的真实磨损状态。
For this reason, the real wear condition will be deduced by studying the group characteristic of debris group in the ferrogram.
阐述了低压加热器疏水泵平衡盘磨损的问题，在设备现状基础上进行了理论分析，得出了平衡盘磨损的理论依据。
The abrasion state of LP drainage pumps balancing plate are expounded, and analysis in theory under the equipment status, so as to get theoretical causes of abrasion.
阐述了低压加热器疏水泵平衡盘磨损的问题，在设备现状基础上进行了理论分析，得出了平衡盘磨损的理论依据。
The abrasion state of LP drainage pump's balancing plate are expounded, and analysis in theory under the equipment status, so as to get theoretical causes of abrasion.
应用分形理论对弹头磨损表面形貌进行了研究，研究表明，其表面磨损形貌的不规则和随机分布性具有分形特征。
The topography of bullet surface wear was studied by using fractal theory. The irregularity and random distribution of its surface wear show the fractal characteristics.
在总结柴油机磨损模式的磨粒分析基础上，首次提出在柴油机磨损模式识别中采用基于粗集和模糊理论相结合的模式识别方法。
Based on the analysis of wear particles of diesel engine, a pattern recognition method of the wear mode of diesel engine was originally put forth, by combining rough sets theory and fuzzy theory.
本文通过实验和理论分析探讨了磁场对机床切削的影响，发现施加磁场是减小刀具磨损的又一个新方法；
Through theoretical analysis and experiments this paper presents an investigation of the effect of magnetic field on machining processes.
在简单介绍监测刀具状态的重要性的基础上，文章从理论上推导了主轴电流与刀具磨损量之间的关系式。
After a brief introduction the importance of tool condition monitoring, the paper derived the relationship between the spindle current and tool wear theoretically.
从理论上分析了离心泵推力平衡装置产生磨损的原因，并提出了可行的解决办法。
The wear reason of trust balance device of Centrifugal pump is analyzed theoretically. A workable Solvent is put forward.
从理论上分析了在纵向外圆磨削过程中砂轮的磨损特点，得出了砂轮径向磨损的计算公式。
The paper theoretically analyzes the abrasion characteristics in the process of the longitudinal circular grinding, obtains the calculation formula of the radial abrasion of the wheel.
通过对反射式光纤位移法检测原理的理论分析，给出了轧辊磨损度测量的理论依据。
Through analyzing the principle of the reflective fiber-optic displacement method theoretically, the base of detecting roller wear is presented.
试验研究了喷油器密封端面磨损对标准喷油器流量的影响，并从理论上进行了分析论证。
The effect of nozzle holder pressure surface wear on flow characteristics of calibrating injector assembly is investigated and analyzed theoretically.
运用电接触理论，建立了电容式集流环的电接触模型，并将其与普通集流环的电接触模型进行比较，得出其磨损降低的理论依据。
Using electrical contact theory, the model Capacitive Current Collector is established, to compare with the general one, which reduce the wear and tear of its theoretical basis.
应用推荐