本文介绍了该吸盘的结构及磁路设计中的问题。
The article also describes the structure and magnet circuit design principle of the chuck.
介绍了差动变压器式压力传感器的工作原理、磁路设计及关键工艺。
The principle, the design of magnetic circuit and the key technics of the differential transformer type pressure sensor were described.
通过改进模具磁路设计，使压坯密度分布趋于均匀，提高了大弧度磁瓦产品的成品率。
An improved method, for design of mould magnetic path in order to uniform the density of the tile billet is introduced, then increasing the rate of finished product.
分析结果显示，将APDL语言面向对象软件设计应用于磁路设计是一种有效的方法。
The software developed with APDL language of ANSYS was introduced and was used for the optimization of magnetic circuit of the magneto-rheological damper.
通过对磁流变阻尼器的电磁学数值模拟，研究了磁路设计与磁流变阻尼器性能的相关性。
Through the electromagnetic numerical simulation, it carried out the study of the correlation on the magnetic design and the performance of MR damper.
目的：研究不同磁路设计的磁性附着体所产生静磁场对人牙龈成纤维细胞酶学的相关作用。
Objective: To investigate the effects of static magnetic fields which are generated by the open-circuit and closed-circuit dental magnetic attachments on the enzymology of human gingival fibroblasts.
结果表明选用较高电阻率的磁性薄膜和优化磁路设计，是薄膜电感器设计中必须考虑的问题。
Results indi- cates that magnetic films with relatively higher resistivity and optimized magnetic circuit have to be considered in film inductor design.
从磁芯材料选择、磁场方向确定和磁路设计步骤三方面总结了磁流变器件磁路设计的一般方法。
Three aspects on magnetic circuit design of MR devices including selection of magnetic core material, determination of magnetic field direction and magnetic circuit calculation were investigated.
通过磁路半集总参数分析，提出了用旋转永磁体法制备非枝晶组织半固态浆料的磁路设计原则。
A principle of the magnetic circle designing of rotary magnetic method used in making semisolid slurry with non dendritic structure is analysed by the semi lumped factor method.
本文介绍了一种永磁磁路设计方法，并以0.35T的MRI主磁体设计为例验证了磁路设计方法的有效性。
A method of permanent magnet circuit design is introduced. Validity of the method is validated by the design of main permanent magnet of MRI with 0.35t.
本文的重点在于系统的磁路设计，采用信号相关性运算比较被测钢管信号和模板信号缩小端头盲区的“无盲区”方法。
The main parts of the article are the designation of magnetic path for the detecting system and the "no blind areas" method, which is based on the signal relativity operation.
分析了提离值选择的主要原则，并从磁路设计角度，提出了一种通过改进油气管道检测器结构抑制传感器提离值波动影响的方法。
The factors affecting the liftoff were analyzed with a method to avoid the effect of fluctuations of the liftoff by improving the MFL detector magnetic circuit design.
现研制出一种新型移动机器人——水冷壁清扫检测爬壁机器人，采用独特的抗倾覆双履带结构、特殊的磁路设计和开放式控制系统。
To accomplish automation of the cleaning and inspecting work, a novel mobile robot was designed to clean and inspect the water-cooling tubes in power plants.
磁滤器是一种用于弱磁性粉体矿物分选的小型磁选机，其磁系是磁滤器的关键部件，针对国内外磁系磁路设计中的问题，研制了一种磁路独特的永磁磁滤器。
On account of the problems of magnetic circuit design of magnet assembly at home and abroad, a permanent magnetic filter with a unique magnetic circuit was developed.
介绍了非接触磁电式转速传感器的基本原理、结构设计及磁路计算，给出了试验数据，并对测试结果进行了分析。
The basic principle, structure design and calculation of magnetic circuit for touchless magnetoelectric rotational velocity sensor are reported. The test data and testing result are also analyzed.
磁路结构的设计是保证机器人在船体表面可靠吸附的关键技术。
The design of magnetic structure is the key technology of ensuring reliable adsorption of the robot on the ship hull.
以实际工程应用为背景，针对电磁轴承的结构参数设计，分析了忽略铁磁材料磁阻对磁路计算带来的误差。
In the structure parameter design of electromagnetic bearings, the error ignoring the ferromagnetic resistance in the magnetic circuit calculation was analyzed.
典型的极化磁系统主要有四种结构，其简化磁路等效数学模型是继电器设计的基础。
The typical polarized magnetic system has mainly four structures and its simplified equivalent magnetic circuit model is the base of the design of the electromagnetic relay.
具体就磁流变液的制备和流变特性，磁流变阻尼器的力学特性及其磁路、结构设计以及磁流变液的应用情况进行了分析研究。
It also investigates and analyzes production of MRF, rheological property of MRF, dynamic property, magnetic route and structural design of MRF damper, and applications of MRF.
给出了线性阳极层离子源磁路的设计。
Design of the magnetic loop for the linear anode layer ion source was given.
并对高性能永磁同步电动机的结构和磁路特点进行了分析，归纳了其设计难点。
On the other hand, the structure of HPPMSM and magnetic circuit characteristics were analyzed in this thesis then concluded its difficulties in designing.
论述了力矩器在设计过程中磁路与结构之间的关系，通过磁路工作点的选择来达到力矩器的最优化设计。
The relation between magnetic circuit and structure in the torque designing is discussed, and via choosing the best working point of the magnetic circuit, the optimal design is realized.
为更好的阐明人工心脏电机及控制系统的设计思路，一方面，本文详细阐述了磁路系统及电机经典设计方法及公式。
To better clarify the artificial heart design of the driving motor and control system, this article first detailed motor magnetic circuit system, classical design methods and formula of motor drive.
根据电磁学的基本原理，对磁路结构进行了设计。
Based on the fundamental theory of electromagnetism, the magnetic structure is designed.
针对电缆管绞机中的实际要求，在对其磁力悬浮系统的磁路、磁力以及电阻和温度等各方面进行理论分析的基础上，提出了设计方法。
Magnetic suspension technology was explored for the cable-creating machine. Theoretical analysis and designing method with consideration of magnetic path, temperature were presented.
通过电路和磁路推导，提出了该集成磁件的等效模型和设计依据。
The equivalent model and design consideration are put forward through electric and magnetic circuit analysis.
在力矩器的设计中，采用了新的永磁、软磁材料，优化了力矩设计，计算了磁路工作磁场强度。
In the design of moment device, new magnetic materials are used, the design of moment device is optimized, the magnetic intensity of magnetic circuit working is calculated.
经过磁路计算，机械设计制造出了本无级变速器，并用实验证明了它的可行性。
We have designed and manufactured this CVT by account magnetic field, which also has been proved by experiment.
采用非线性磁路分析和有限元计算结合的方法给出了该电机的非线性动态分析模型计算的一种思路和方法，有助于电机设计分析。
It propose nonlinear dynamic analyzing model calculation method of the motor in the use of nonlinear magnetic path analysis and finite element calculation.
对其磁路走向的分析得出设计轴径向电机时，要注意防止轭部过饱和。
After the study of the magnetic circuit, a problem of yoke saturation was found which needs regarding in the design.
应用推荐