并用分形几何的方法描述砂轮表面轮廓形貌。
Using the method of fractal geometry to describe the profile of grinding wheels.
砂轮表面形貌对磨削表面质量及磨削效率有很大的影响。
The surface topography of grinding wheel has great influence on the quality of workpiece and the grinding efficiency.
本文分析了砂轮表面特性和修整对磨削表面粗糙度的影响；
This paper analyze the influence of grinding wheel surface characteristics and dressing on grinding roughness of surface.
采用气囊式内胎和连接式弹簧环结构减少磨削中振动影响，便于控制砂轮表面砂带的张紧力。
With the airbag internal capsule and continuous spring ring structure, grinding vibration is decreased and machining accuracy is improved.
借助于工件磨削区域的分割和砂轮表面的离散化处理，建立了一种新的内圆磨削模拟计算模型。
A new analogue analysis model on the inner circle grinding is set by meshing the grinding area of work-piece surface.
大多数计算磨削表面粗糙度的理论公式都是基于砂轮表面磨粒与工件表面的几何创成机理建立的。
Most of the theoretic formulas to calculate the ground surface roughness are based on the geometrically generating interaction between grits and workpiece surface.
对超精密磨削所用细粒度金刚石砂轮磨粒粒径的分布特点和砂轮表面上磨粒的轮廓波长进行了分析。
Detailed analyses of the grain size distribution characteristics and the grain profile wavelength of fine diamond grinding wheel used for ultra-precision grinding are presented.
便携式研磨工具应装有安全防护装置，这样不仅可防止工人接触运转的砂轮表面，而且他们也不会被破裂时飞溅的碎片击中。
Portable grinding tools need to be equipped with safety guards to protect workers not only from the moving wheel surface, but also from flying fragments in case of breakage.
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means o...
本文主要论述修整参数对砂轮表面地形的影响，借助微型计算机和透射电子显微镜还对高速低粗糙度磨削机理进行了一些探讨。
Especially, this paper is to deal with the effect of the dressing parameters on the grinding wheel surface topography, and, by means of microcomputer and electronic microscope, the mechanism of...
基于此原因，砂轮的速度不应超过制造商规定的安全表面速度的限制。
For this reason, the speed of a grinding wheel should not exceed the safe surface speed limit specified by the manufacturer.
因此，当轧辊表面硬度波动及OR G砂轮硬度波动时常发生轧辊修磨过大或修磨不足等问题，还不能实现工作辊均匀精度修磨。
Thus, working roller to perform uniform accurate grinding has not become true for roller surface rigidity and ORG grinding wheel rigidity fluctuating result in excessive or deficient roller grinding.
用其端面进行表面磨削的圆柱、直杯及外展杯状砂轮。
Cylinders, straight cups, and flaring cups are used for surface grinding with the end face of the wheel.
砂轮的表面是否均匀？
通过实验，对砂轮平衡精度与磨削加工工件表面粗糙度之间关系作了深入的研究。
This article researched the relationship between balance precision of the grinding wheel and the ground surface roughness.
采用低压磨料水射流对高效率、高精度、高表面质量的CBN(立方氮化硼)砂轮进行了研究。
In this paper, the CBN grinding wheel of high efficiency, accuracy and surface quality was studied by means of low pressure abrasive water jet.
这种高刚度的砂轮具有高的磨削能力和磨削效率，缺点是被磨工件表面易产生划痕，难以获得高的表面加工质量。
Such grinding wheel has advantages as high grinding ability and high grinding efficiency, but they are easy to induce scratches on the ground surfaces and hence make bad surface machining quality.
用纤维砂轮加工的不锈钢板材的表面。
Stainless steel sheet with polished surface processed with fiber emery wheel.
研究发现：砂轮速度和磨削深度对表面粗糙度的影响都可归结为未变形切屑厚度的改变。
It is found that the surface roughness influenced by wheel speed and grinding depth can be attributed to the changing of undeformed chip thickness.
研究结果表明，对于单晶硅等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、进给量等因素有关。
It is shown that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single silicon.
研究金刚石砂轮磨削单晶硅片时的表面磨削温度。
The surface grinding temperature of the silicon wafer ground by diamond wheels is studied.
本文从分析动压轴承的弱点出发，着重就砂轮不平衡量对磨削表面粗糙度的影响作了探讨。
In this paper the influence of wheel unbalance on the ground surface roughness is investigated in consideration of the disadvantages of dynamic pressure bearing.
正如料想的那样，这种方法只在要磨削表面比所用砂轮宽度短时才使用。
As you can see, this method can be applied only when the surface to be ground is shorter than the width of the grinding wheel used.
成形砂轮的形状精度直接影响工件表面的加工质量。
The shape precision of form-grinding wheel can directly affect process quality of work-piece surface.
研究结果表明，对于微晶玻璃等脆性材料，其表面粗糙度主要与砂轮的平均磨粒尺寸、砂轮速度、进给量及磨削深度等因素有关。
It is showed that the surface roughness is mainly related with the average grain size and feed per wheel revolution for the brittle materials such as single crystal silicon.
本文就树脂结合剂cbn砂轮的修整方法及其对磨削表面完整性的影响进行了研究。
In this paper, the dressing methods for resin bonded CBNwheels and their effects on ground surface integrity are investigated.
介绍了用金刚石滚轮成型修整陶瓷结合剂刚玉砂轮、然后用所修得的成型砂轮磨削表面具有圆弧形状的辊子的方法。
The method of dressing ceramic-bonded corundum grinding wheel by using diamond dressing wheel, then using dressed profile grinding wheel grinds roller surfaces of arc shape is introduced.
电火花加工技术是金刚石砂轮整形和改善表面质量的有效方法。
It is an effectual way to improve the figure and the surface quality of diamond grinding wheel using EDM.
电火花加工技术是金刚石砂轮整形和改善表面质量的有效方法。
It is an effectual way to improve the figure and the surface quality of diamond grinding wheel using EDM.
应用推荐