传统的多路寻址液晶驱动矩阵电路设计规模与矩阵阶数平方成正比。
The design scale of traditional driving matrix of MLA-LCD is in proportion to square of matrix dimension.
介绍了在袋式除尘器电控系统的设计中，利用继电器构成矩阵电路的设计和实现方法。
The design and realizing method is introduced using matrix electric circuit which consists of relays in the electric control system of bag type dust collector.
此外，在诸如逻辑电路之类强调操作速度的电路与矩阵电路之间，薄膜晶体管的结构不同。
Further, structures of thin film transistors are different between a circuit in which emphasis is placed on the speed of operation, such as a logic circuit, and a matrix circuit.
文中详细分析了3电平交流斩波电路和3电平矩阵电路的工作原理，介绍了3电平矩阵电路所采用的控制方法。
The operation of 3 level AC chopper and 3 level matrix converters are introduced, the control method applied to 3 level matrix converter is presented.
然后使用矩阵求解的方法解得该电路。
通过观察，直接由网络写出导纳矩阵，并由其求解电路。
By observing the network, the admittance matrix is written directly and thus circuit can be solved.
本文讨论用导纳矩阵描述多节点运算放大器电路的有用方法。
This paper discusses an useful method by which the multiple nodes circuit composed of the operational amplifier is described using admittance matrix.
该法以电路的改进节点方程为基础，具有建立故障诊断方程容易，所建立的方程具有较低的非线性度及规则的雅可比矩阵的特点。
This method based on modified nodal approach is easy to set up the fault diagnosis equations and has lower degree of nonlinearity and regular Jacobi matrix form.
本文提出了一种用对称阻抗矩阵直接得出等效电路的方法。
This paper presents an approach to derive equivalent circuits directly from symmetrical impedance matrix.
根据电路基本定律，列出了计算各层定流的矩阵方程并推导了有关的计算公式。
Based on elementary circuit theorems, the matrix equations for calculating layer currents are set up and some formulas are deduced.
本文就利用数据选择器实现逻辑函数的问题进行研究，引入了矩阵和概率的方法，对电路的最简设计作了初步探讨。
In this paper, the question of logic function accomplished by data selecter is studied, draw into the method of matrix and probability to preliminary explore of the simplest design of circuit.
本文利用微分方程单位解矩阵估计的相关方法，得到了确定含有非线性电阻的动态电路唯一稳态的条件。
Based on the estimation of the unit solution matrixes of differential equations, the unique steady state of the dynamic circuits with nonlinear resistors is studied by matrix measure.
本文就电子电路机助分析与设计中的稀疏矩阵技术进行了分析和讨论。
This paper deals with the topics of sparse matrix techniques for computer-aided analysis and design of electronic circuits.
在分析现有模拟电路多频灵敏度故障诊断方法的基础上，提出一种新的测试频率范围的选择方法，即灵敏度矩阵分析方法。
After analyzing current fault diagnosis methods based on multi-frequency sensitivity in analog circuits, a new sensitivity matrix analysis approach is presented to select testing frequency.
本文讨论负反馈放大电路的一种分析方法——节点导纳矩阵分析法。
This paper gives the discussion on a kind of analysis method, Node Admittance Matrix method, for negative feedback amplifying circuits.
本文的结果表明，含有非线性电阻的动态电路的唯一稳态。可以用矩阵范数决定。
The main results show that the unique steady state of the dynamic circuits with nonlinear resistors can be determined by the matrix norms of some matrixes.
本文提出一种用最大秩逆矩阵诊断线性模拟电路故障的新方法。
A novel method is proposed for fault diagnosis of linearly nonreciprocal analog circuits.
结果表明，该类电路的唯一稳态，可以用分解矩阵的稳定性来决定。
The main results obtained in this paper show that the unique steady state of the nonlinear nonautonomous circuits can be determined by the stability of decomposed matrixes.
此法区别于采用关联矩阵的一般方法，对于规模较大的电路，具有明显的减少输入数据、缩小内存、节省计算时间的优点。
It has shown that the proposed method has the advantages of reducing input and input and storage and of saving computational time espacially for a larger circuit.
通过改进原有馈电电路并调整开关矩阵与阵列天线的连接顺序，现提出了一套新型的多辐射中心仿真系统的设计方案。
This paper presents a new de- sign for RFSS of multi - radiation centers, which bases on modifying feed circuits and the join order in traditional sys- tem.
在一个单片机系统的基础之上，实现不多于六位数字(包括符号和小数点)的输入。该单片机系统由80c196 KC单片机和矩阵键盘电路组成。
Based on a system of SCM, realizing the input of digits (including of symbols and decimal) which is less than six bits, the system of SCM is composed of 80c196kc and matrix keyboard.
特勒根定理2是电路理论中的重要定理。本文用矩阵方法分析其共轭性，最后给出特勒根定理完整的矩阵表述。
Tellegen's theorem 2 is important in circuit theory. This paper analyzes its conjugation with matrix method and represents the complete matrix formulation of Tellegen's theorem.
矩阵运算广泛应用于各类电路计算中，矩阵运算的硬件实现能够充分发挥硬件的速度和并行性。
Matrix operation is widely used in different kinds of circuit calculation. Hardware implementation of matrix operation can fully realize the speed and parallel of the hardware.
本文依据流体力学的基本原理和电路中网络理论提出一种新的通风系统计算方法——网络矩阵法。
According to the basic principles of hydromechanics and the electrical network theory, a new method named network matrix approach is presented in this paper to calculate ventilation system.
本文提出用矩阵信号流图和信号流图编写电路状态方程的方法。
A method for state equation formulation of electric circuits by means of signal flow graphs and matrix signal flow graphs is presented.
微波开关矩阵主要是实现自动测试系统与被测电路单元之间的信息交换，以及为被测单元提供必要的负载。
The microwave switching matrix is to exchange messages between ATS and the circuit units under test, and to provide necessary load for these units.
最后，本文提出了一种电位控制的矩阵式，N 中取1的互斥逻辑电路和电位控制的自动取样电路。
Finally, a choice of 1 out of N potential controlled mutual blocking logical circuits in the form of matrix and a potential controlled auto-sampling circuit have been recommended.
介绍了一种基于I2C总线的大型开关矩阵结构及其功能，给出了其测试电路结构组成及控制电路组成。
The structure and function of a large-scale switch matrix which based on I2C bus are introduced, and its test circuit structure and control circuit structure are given.
像矩阵那样排列的像素电路的每一个借助于一个光电转换元件把入射光转换成电信号。
Each of pixel circuits arranged like a matrix converts incident light into electrical signals with a photoelectric conversion element.
像矩阵那样排列的像素电路的每一个借助于一个光电转换元件把入射光转换成电信号。
Each of pixel circuits arranged like a matrix converts incident light into electrical signals with a photoelectric conversion element.
应用推荐