采用离散矢量法可以有较好的实时性和观察性。
The Discrete Vector method can achieve the combination of both observability and real-time capacity.
旋转矢量法是研究谐振动的简洁而有效的方法。
Rotational vector is a simple and effective means of researching resonance.
矢量法可应用于任何外形能写出函数关系的目标。
The vector method can be applied to any targets that their profiles can be expressed with functions.
分析震波位移方向有两种方法，即解析法和矢量法。
We have two methods for analysing the motion directions of seismic waves, namely, analytics and vector method.
用基底矢量法对X型列车的摆式机构进行了运动分析。
Kinematic analysis by using base vector method for the swing linkage of X type train is presented in this paper.
文中表明用四元数方法证明该定理比矢量法更为简单。
The paper shows that the method of proving the commutative property of composition for the finite rotations by quaternions is simpler than that by vectors.
通过砂轮机转子动平衡介绍了单平面平衡矢量法的步骤。
Program of vector method is introduced by rotor dynamic balance of emery wheel machine.
实验结果表明，三表法和矢量法比两表法相对误差较小。
The experiment results showed that three-meter method and vector synthetic method have more veracious than two-meter method.
控制策略有阶梯波法、载波相移法和电压空间矢量法等。
There are many control strategy, such as stair waveform, carrier phase shift, voltage space vector and so on.
运用复矢量法建立了刨床急回机构动态静力分析的力学模型。
The mechanical model of the dynamic analysis of quick-return mechanism in the planer is established by complex vector method.
在基本旋转矢量法的基础上，提出了多点旋转矢量优化方法。
A new proposal for multipoint rotate-vector optimization is presented based on the basic rotate-vector method.
运用矢量法建立机构的位移矢量方程，推导出速度、加速度矢量方程。
Establish displacement vector equation of mechanism using vector method to infer the speed and the acceleration vector equation.
提出用复数-极坐标矢量法(简称复矢量法)来分析平面机构的运动。
A new method is proposed to analyse the motion of plane mechanism by means of complex polar coordinates vector method.
而空间矢量法谐波特性好、电压利用率高、控制方法简单便于数字实现。
SVPWM has low harmonic and high voltage utilization. The control method is simple and easy for digital realization.
运用复数矢量法对于单自由度平面连杆机构的运动进行了软件模拟和分析。
This article develops a software to simulate and analyze the movement of planar linkage with single degree of freedom by using the method of complex vector.
并以三电平逆变器为例，推导了三角载波调制法和空间矢量法的本质联系。
And to three-level inverter as an example, the nature contact of the triangular-carrier modulation method and space vector method is derived.
采用光线矢量法设计了两个相互垂直的椭圆截面柱透镜组来准直半导体激光束。
By using the light ray vector method, the elliptic-section cylinder lenses have been designed to collimate the semiconductor laser beam.
然后采用最佳矢量法求解结构体系可靠度指标约束下的最小重量优化设计问题。
Secondly, the problem of the minimum weight design is resolved by using the optimum vector algorithm under the constraint of the structure system reliability.
用矢量法导出了旋转驴头式抽油机悬点运动的位移、速度和加速成度的表达式。
With the help of the vector method, the general expressions for the displacement, velocity and acceleration of the polished nod on the swing horsehead pumping unit(SHPU)was introduced.
由能量方程出发，引入新变量，用旋转矢量法讨论了三线摆大角度摆动时的周期。
New variable is introduced based on energetic equation, the period of vibration of three wire pendulum is studied using the method of rotating vector.
用单自由度系统的受迫振动和旋转矢量阐述了转子现场动平衡的单平面矢量法的原理。
The principle of vector method of single plane for spot balance of rotor has been present by forced vibration of single freedom system and rolling vector.
《医学物理学》课程中，简谐振动旋转矢量法的学习，仅靠静态图片不利于阐明其原理。
During the teaching of Medical Physics, it is difficult to describe harmonic vibration with rotation vector clearly just with some static pictures.
将瞬心分析与速度矢量法相结合的瞬心—速度矢量法较转化机构法更为清晰、明了、直观。
Instantaneous center of rotation-velocity vector method is the integration of instantaneous center of rotation analysis and velocity vector method.
在试验模态分析中分量法及矢量法是非常简便实用的，但在处理密模态结构时会出现问题。
The quadrature and Vector methods are very simple and efficient in experimental modal analysis. The difficulties will be met in the consideration of structures with close-modes.
采用了封闭多边形矢量法和杆长逼近法相结合的综合分析方法对III级组进行了运动学分析。
The generalized analysis method to the III level of groups are carried on with the closed loop method and approximating method.
介绍了目前国内外几种主要电磁暂态计算方法。对贝杰龙法和空间矢量法作了重点的介绍和评价。
Some transient computation methods presently used, particularly the methods of Begeron and space phasor components are introduced and evaluated in this paper.
本文首先应用线性无关矢量法对平面八杆机构作了讨论，得出了满足静平衡条件的构件设计方程；
The design expressions for the planar 8-bar linkage under the condition of perfect balance of shaking forces have been derived by the method of linearly-independent mass-vectors.
并选用了矢量法中的摄动法，在主从手运动学模型的基础上分别建立主手和从手机器人的误差模型。
Then the error models of the master-slave manipulators are established separately using the perturbation way of the vector method on the basis of the kinematics model of the master-slave manipulators.
为了求解曲柄导杆机构的运动学规律，运用矢量法进行了分析，建立了曲柄导杆机构的运动学数学模型。
Using the vector method to analyse and solve kinematics of the crank-pilot bar mechanism, thus established the kinematical mathematic model of the crank-pilot bar mechanism.
矢量法给出的是运动关系的函数表达式，这给机构运动全过程分析及计算机辅助分析机构运动提供了便利。
The vector method represents the motion relations in functions so that it facilitates the application of either the whole - process analysis of mechanic motion or the computer - aided analysis.
应用推荐