该文介绍了西门子全数字直流调速装置(6ra70)和可编程逻辑控制器(SIMATICS7- 300)首次在码垛电磁铁系统中的应用。
This paper introduce the application of Siemens digital direct current timing device (6ra70) and program logical controller (SIMATIC S7-300) in piling bed electromagnet for the first time.
该模拟神经控制器能用于直流与交流调速系统中。
The analog neutral controller can be applied to DC and AC speed governing system.
利用模糊自适应PID控制器对直流调速系统进行控制，设计了三个自适应模糊控制器分别实时调整PID参数。
Apply fuzzy self-adaptive PID controller to control the DC timing system and design three self-adaptive PID controllers which adjust the PID parameters respectively in real-time way.
本文论述了应用集成PWM控制器的直流调速系统，并对该系统结构和工作原理进行了分析和研究。
This paper discusses the integrated PWM controller for the direct current governor system, and studies the system construction and the working mechanism.
整个系统由可编程控制器、全数字式直流调速系统、芯棒断裂检测系统、管料跟踪系统等构成。
It includes programming logical controller, digital direct current adjustable rate system, steel wick sticks crackle detect system, steel pipe track system.
采用直流调速器和可编程控制器的结合来实现飞锯机模拟。
In this system, the PLC and the DC speed-regulator are combined to simulate the operation of flying saw machine.
该系统选用西门子新一代的6RA70系列直流调速装置作为核心控制器，较好地实现了船模拖车速度的控制要求。
The new generation of Siemens 6RA70 series d. c. speed adjustment device is selected as the key controller of the system, which satisfies the requirements of controlling carriage speed well.
介绍可编程控制器、直流调速系统、变频器、电子凸轮开关在倒棱机中的应用。
This paper introduces the application of the programmable controller, the direct current velocity modulation system, the frequency inverter and the electronic CAM switch in chamfering machine.
通过设计一种模糊pid控制器，应用模糊算法在线自动整定PID参数的方法，将其应用于无刷直流电动机调速控制系统。
A kind of PID controller with fuzzy algorithm setting on-line PID parameters automatically was designed and applied in brushless DC motor speed control system.
提出了一种用于直流电机调速系统的控制器设计方法，该方法主要基于ITAE最优控制理论，并结合PI控制。
The controller of the DC motor speed adjusting system is developed, which is based on ITAE optimum control theory combined with PI control.
采用MCS-51单片机为主控制器，用于步进式冷床同轴的直流调速系统，比较成功地解决了强力矩耦合情况下的双机转矩平衡问题。
MCS - 51 computer on slice is used as the main CPU in the step DC governor system for cold bed solving problems of two unit torque equilibrium under heavy moment coupling.
本文介绍一种使用英国欧陆直流调速模块作为控制器的直流调速装置的构成及在糖厂压榨机中的应用。
The application of digital DC speed regulating equipment which USES EURO controller in sugar factory is introduced in this article.
本文分别用PI控制器和IP控制器对直流伺服电机模型建立PWM驱动数字型调速系统。
The numeral timing systems driven by PWM are set up for the direct current servo motor model by using the PI. and IP contrail ers respectively.
介绍了基于单神经元控制的直流调速系统的结构组成，单神经元控制器及其学习算法设计，单神经元直流调速系统参数设计和微机仿真试验。
This paper introduces the composition?controller and its algorithm?parameter design and simulation test based on direct current timing system of single nerve cell.
根据DMC算法设计DMC控制器，以提高直流调速系统的动态性能。
A DMC controller was designed based on DMC algorithm to improve the dynamic performances of DC motor's speed adjusting system.
针对直流调速系统，将单神经元自适应PID控制器与负载观测器有机结合，提出了一种基于单神经元的自适应速度控制方法。
An adaptive speed control scheme for DC drive system, which combines an adaptive PID controller based on single neuron with a load observer, is presented.
利用该方法为直流脉宽调速系统设计了控制器，并在实验室进行了实现，显示了良好的动态特性，表明控制器具有较大的工程实用价值。
With the CAD Program, controller is designed for the PWM system, Its realization shows good dynamic properties and that the design is valuable in engineering practice.
首先，在所搭建的试验平台上，用软件设计了无刷直流电动机的全数字双闭环调速控制，验证了DSP控制器的高性能、高精度等优点。
First, speed control of motor based on DSP is designed with this platform, which approves good performance and good precision of DSP controller.
同时，电流闭环控制器可以快速地跟踪给定电流，因此系统可以自适应地调节环境变化，提高了无刷直流电机调速性能。
At the same time, the current loop controller traces the change of given current rapidly, so that the system can adapt to variational environment. Improved its speed performance.
介绍了以十六位单片机80C196KB/KC作为中心控制芯片，结合直流电机PWM调速原理制成的数字直流PWM调速控制器。
The digital PWM speed controller based on the DC motor PWM speed regulating theory and using a 16 bit microcomputer 80C196KB/KC as the central control chip, was presented.
本文根据模糊控制理论设计了模糊控制器，并将PID控制和模糊控制相结合，用于直流双闭环调速系统。
This article is based on fuzzy control theory and design of fuzzy controller, and PID control and fuzzy control, for DC double loop system.
张力分段控制，采用变频调速或数字直流调速系统，并采用多点同步控制器控制，整机同步运行。
Tension is separately control with inverter or digital D. C. adjusting system. And synchronized operation is realized by multi point synchronous controllers.
简介采用直流调速器和可编程控制器的结合来实现飞锯机模拟。
Abstract: In this system, we use PLC and DC Digital Drive to Simulate the Flying Saw.
简介采用直流调速器和可编程控制器的结合来实现飞锯机模拟。
Abstract: In this system, we use PLC and DC Digital Drive to Simulate the Flying Saw.
应用推荐