主要产品有：焊锡丝、焊锡条、无铅锡线、无铅锡条、锡膏、锡锭、助焊剂、电镀阳极棒、巴氏合金等。
The main products are: solder wire, lead-free solder bar, line, lead-free solder paste, strips, tin ingots, flux, electroplating anode, babbitt, etc.
采用适当的电镀技术诸如阳极化和附加阴极技术可以控制镀层的厚度和范围。
Proper use of special plating techniques, such as conforming anodes and robbers, can control plating thicknesses and runouts.
电镀位置：镀件在药水中位置，与阳极相对位置，会影响膜厚分布。
Electroplating position: in a location in the plating liquid, and the relative position of the anode, can affect the film thickness distribution.
测试了锂离子蓄电池电镀锡阳极在不同充电（合金化）状态和不同充放电循环次数后的电化学阻抗谱。
The impedance spectrum of the electroplating tin anode for Li-ion batteries is measured at various states of charge(alloying)and after charge-discharge cycles.
阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。
Valve body and internal parts: anodized aluminum alloy, copper.
但是在电镀过程中不需要电流或阳极。
The process does not require electrical current or anodes as in electroplating.
阀体和内部零件：阳极电镀铝合金、铜。加固端盖：塑料。
Valve body and internal parts: anodized aluminum alloy, copper. Reinforcement Cover: Plastic.
纯铜基底保证良好的散热效果，阳极电镀铝质上部防止锈蚀。
Pure copper base ensures excellent heat dissipation, and anodized aluminum top prevents corrosion.
辅助阳极：除了在电镀中正常需用的阳极以外，为了改善被镀制件表面上的电流分布而使用的附加阳极。
Auxiliary anodes: in addition to the normal in electroplating need outside anode, and to improve the product plated on the surface of the current distribution and use additional anode.
电镀，镁合金，阳极处理相关处理剂。
Electroplating, magnesium alloy, and other anodic treatment agents.
盐水喷雾试验机针对各种材质之表面经电镀、阳极处理、喷涂、防锈油等防腐蚀处理后、测试其制品之耐腐蚀性。
Salt spray test machine for a variety of surface materials by electroplating, anodizing, painting, rust-proof oil, anti-corrosion treatment, testing its products on the corrosion resistance.
同时此系统也可以用于电镀，铝阳极氧化等电化学过程控制，以及晶体管直流特性测试等方面。
This system can be also used for the automatic control of the electro plating and aluminum anodizing process and the DC characteristic measurement of some semiconductor transistor.
为了防止铅系合金阳极引发电镀锌钢板黑变，对不同成分及不同制造方法得到的阳极进行了电化学性能研究。
The electrochemical characteristics of lead based alloy anodes with different composition prepared by different way are researched for suppressing the black patina of galvanized steel sheets.
电镀工艺参数主要包括电流密度、温度、PH值、搅拌、阴阳极和换向电流等因素，其中影响最大的是电流密度。
Electroplating technological parameter includes factors of ampere density, temperature, PH value, stir, negative and positive pole. The maximum influencing factor is ampere density.
采用电镀法在铜箔上制得了金属锡电极，用作锂离子蓄电池阳极材料进行了电化学测试。
The metal tin electrodeposited on cupper foil was used as anode material of lithium-ion batteries.
通过试验，我们确定了分散电镀镍的工艺参数、合适的辅助阳极和纺杯镀件的悬挂方式。
The technological parameters for the dispersed nickel plating are fixed experimentally, the suitable supplementary anode selected, and the optimum ways to hang the plating specimens determined.
首先制备了铝阳极氧化模板，随后通过电镀法制备了纳米线，并对铝阳极氧化模板和纳米线进行了表征。
A template of anodic aluminum oxide is prepared first, then a nano-wire is electrodeposited, and on this basis, the template of anodic aluminum oxide and nano-wire are characterized.
碱性锌钴合金电镀常采用锌阳极和低碳钢阳极。
Soluble zinc and insoluble low carbon steel anodes are used for alkaline zinc-cobalt plating.
电镀时，镀层金属做阳极，被氧化成阳离子进入电镀液；
Electroplating, coating metal anode, was oxidized to cationic into plating solution;
主要探讨了影响电镀铜用磷铜阳极质量的因素，包括原材料、铜晶粒结构、磷含量及阳极表面的清洁。
The plating conditions show great influences on the P content of the coatings and thus the corrosion resistance.
主要探讨了影响电镀铜用磷铜阳极质量的因素，包括原材料、铜晶粒结构、磷含量及阳极表面的清洁。
The plating conditions show great influences on the P content of the coatings and thus the corrosion resistance.
应用推荐