探索了丝网化学镀铜和电镀镍工艺。
The technique of chemical deposition of Cu and electroplating of Ni was studied.
允许对校准块表面镀铬或无电镀镍。
It is permissible to chromium plate or electroless nickel plate the surfaces of the block.
颜色主要有银色，电镀镍或者银白色。
研究了一种镁合金表面直接电镀镍的新工艺。
A new process of direct electroplating on magnesium alloys was studied.
对电铸铜与电镀铜工艺、电铸镍与电镀镍工艺进行了比较。
Copper electroforming and nickel electroforming processes were compared with copper electroplating and nickel electroforming process respectively.
回顾了电镀镍添加剂的技术进步过程，是市场需要推动了这种进步。
Technology progress process of additives for nickel plating was reviewed. This progress was promoted by the market demand.
讨论了陶瓷-金属封接中化学镀镍与电镀镍工艺及相互之间的区别。
The paper discusses the techniques of chemical plated nickel and electroplated nickel, as well as their difference in the ceramic-metal seal process.
对电镀镍锰胎体金刚石钻头和镍钴胎体钻头的使用情况进行了对比。
The experiments have been carried out to compare the application of Ni Co matrix diamond core bits to Ni Mn matrix diamond core bits.
用途主要用于电镀镍、化学镀镍、铝材着色、电池材料、催化剂等。
Main Uses: Mainly used in nickel plating, chemical nickel plating, aluminum and activator, etc.
电镀镍及镍合金的研究重点是采用新工艺技术改善镀层性能及电沉积机理的探讨。
The emphasis of research in electroplated ni and its alloy is to use a new technology to improve the capability of coating and to probe the mechanism of electrodeposition.
通过试验，我们确定了分散电镀镍的工艺参数、合适的辅助阳极和纺杯镀件的悬挂方式。
The technological parameters for the dispersed nickel plating are fixed experimentally, the suitable supplementary anode selected, and the optimum ways to hang the plating specimens determined.
本文主要介绍了用纳滤膜处理电镀镍漂洗水的小试研究、工业实践及硫酸镍初步纯化研究。
This paper introduces nanofiltration for nickel plating rinse water treatment in small-scale test, industrial practice and preliminary purification of nickel sulfate, respectively.
尽管一般是通过液态锌蘸洗钢铁来镀锌，有时候也会用电解的方法，在电镀镍和铜时就通常使用电镀。
Though galvanisation is often done by dipping steel in liquid zinc, it is sometimes done by electrolysis—nickel and copper plating are normally done this way.
在无电镀镍浴中因次磷酸根氧化而产生的亚磷酸根离子，可以通过碱金属或碱土金属阳离子如钙的沉淀作用而去除。
Orthophosphite ions produced by oxidation of hypophosphite in an electroless nickel plating bath can be removed by precipitation with an alkali metal or alkaline earth metal cation such as calcium.
提供了保护过程的技术细节，首先在光纤表面进行化学镀处理获得导电的薄镍层或铜层，然后在该导电层上进行电镀镍。
The fiber is firstly coated with a thin copper or nickel plate with electroless plating method. Then, a thicker nickel plate is coated on the surface of the conductive layer.
介绍了不锈钢基材电镀镍钼合金的全部工艺过程，并讨论了前处理、锌酸盐镀锌作底层和钼合金电镀等过程因素对本工艺实施的影响。
The process of Ni-Mo plating of stainless steel is introduced in detail. The effects of pretreatment, Zincate Zn pre-plating and process factors on-the technology are also discussed.
他们发现把钨加入镍会产生适当的结构，额外令人高兴的是其混合物能被电镀，并更有利于环保。
They found that when tungsten was added to the nickel it produced a suitable structure. The bonus was that the mixture was capable of being plated and in a way that was more environmentally friendly.
他们发现把钨加入镍会产生适当的结构，额外令人高兴的是其混合物能被电镀，并更有利于环保。
They found that when tungsten was added to the nickel it produced a suitable structure.The bonus was that the mixture was capable of being plated and in a way that was more environmentally friendly.
提出了含铜含镍电镀污泥综合利用的工艺流程，并用试验考察了各工序的技术经济指标。
The process flow extracting Copper and Nickel sulfate from electroplating sludge is put forward. The economic barometer of technology procedure is investigated by test.
指针的表面电镀需经过下列几道工序：过滤、去油脂、预镀镍、镀镍，之间还穿插了数次清洗。
The finish of the hand is achieved by electroplating involving several stages: leaching, degreasing, pre-nickelplating and nickelplating, along with numerous rinses.
以提高电镀金刚石工具性能为目标，研究了稀土对亮镍镀液性能、镀层性能的影响及机理。
The goal is to improve the performance of bright nickel electroplated tools, and to analyze the influence of rare earths on bright nickel plating performance.
提出了利用铜镍电镀污泥生产金属铜和硫酸镍的工艺流程，并用试验考察了各工序的技术经济指标。
New technological process to extract copper powder and nickel sulfate from electroplating sludge was reported in this paper, and the economic barometer of technology procedures was examined in test.
提出一种适用于摩托车零件的多层镍电镀工艺。
A multilayer nickel plating process is suggested for motorcycle parts.
镀镍前或锡电镀间的阴极接触不良，放电火花将铜材熔成凹洞。
Before or tin plating nickel plating of bad contacts between the cathode, discharge sparks will melt into hollow copper hole.
研究了用电镀法制取镍硼合金的可能性。
The possibility of the electroplating process applied to Ni-B alloy was studied.
简述了氨浸法提取镍的基本原理，总结了氨浸法从电镀污泥中回收镍的基本工艺和规律。
The principle of nikel recovering from the electroplating sludge were described, and the technology and the regular pattern were summed up .
电镀焦磷酸盐铜锡镍废水由“常流水”清洗方式改为反喷淋清洗方式。
Counter-flow spray technique for the treatment of the rinsing water containing pyrophosphates in Cu- Sn-Ni alloy plating is described.
研究了一种柠檬酸盐体系电镀锡镍铜合金新工艺。
A new technology that the tin-nickel-copper alloy deposition can be electroplated in the citrate acid system bath was introduced.
研究了一种柠檬酸盐体系电镀锡镍铜合金新工艺。
A new technology that the tin-nickel-copper alloy deposition can be electroplated in the citrate acid system bath was introduced.
应用推荐