这两种方法都是在空隙被电解液填满之前对导电构架进行电镀。
In both cases these are electroplated onto the structure before the remaining gaps are filled with liquid electrolyte.
尽管一般是通过液态锌蘸洗钢铁来镀锌，有时候也会用电解的方法，在电镀镍和铜时就通常使用电镀。
Though galvanisation is often done by dipping steel in liquid zinc, it is sometimes done by electrolysis—nickel and copper plating are normally done this way.
两种情况下都是这些材料电镀在机构上，然后余下的空隙用液体电解质填充。
In both cases these are electroplated onto the structure before the remaining gaps are filled with liquid electrolyte.
电镀：利用电解原理，使金属或合金沉积在制件表面，形成均匀、致密、结合力良好的金属层的过程。
Electroplating: use the principle of electrolysis, the metal and alloy parts deposition in the surface, form even, density, good adhesion of the metal layer process.
电解也用于将一种金属电镀在另一种金属上。
电镀就是利用电解原理在某些金属表面上镀上一薄层其它金属或合金的过程。
Electroplating is to use the principle of electrolysis in some metal surface plating a thin layer of the other metal and alloy process.
产品广泛用于石油化工、电解电镀、机械船舶、海水淡化、体育用品、钛工艺品等领域。
Products are widely used in petrochemical, electrolytic plating, machinery of the ship, sea water desalination, sporting goods, handicrafts, such as titanium in the area.
测定了他们的电化学窗口和电导率，为下一步离子液体在电解活泼金属和电镀领域的应用奠定了基础。
Their electric conductivity and electrochemical window, which play an important role in the applications of ionic liquids to electrodeposition and electroplating of active metals, are determined.
产品广泛用于石油化工、电解电镀、机械船舶、海水淡化、体育用品、钛工艺品等领域。
Products are widely used in petrochemical, electrolytic plating, mechanical ships, desalination, sporting goods, handicrafts and other fields of titanium.
在电镀过程中，电解液也将随着改变，从而会使信号传感器给出错误的结果来。
The electrolyte would also be changed by the electroplating process and would cause the pickoff to give erroneous results.
在含有铅、锡、铜、镍和一些贵金属的电镀池中，甲磺酸(msa)是一种很好的电解质。
Methane sulphonic acid (MSA) has the right combination of properties for electroplating baths containing lead, tin, copper, nickel and some precious metals.
管排可以在换热器、太阳能集热器、电子器件冷却以及电解电镀工程中的排管电极等领域发现其应用。
Tube arrays can be found in the area of heat exchanger, solar collector, electronic cooling and electrodes used in the plating bath.
电镀期间，依据电解原理，将表盘浸入带有电流的液缸中若干次。
During electroplating, based on the principle of electrolysis, dials are immersed into several successive baths through which an electric current is run.
通过电镀电极，并利用电镀的电极通过电解法处理工业造纸废水，研究最佳电镀工艺和处理条件。
Through galvanizes the electrode, and using galvanization electrode through Electrolysis processing industry papermaking waste water, research best galvanization craft and process condition.
本研究采用动态电解装置直接从电镀生产线的回收槽中循环电解回收铜。
This is a study of recovery of Cu from acidic copper rinse water by mobile electrolysis equipment which is installed on the rinsing tanks of the plating line.
而所谓电镀锌就是利用电解，在制件表面形成均匀、致密、结合良好的金属或合金沉积层的过程。
And the so-called electro galvanizing is the use of electrolysis, the formation of uniform, dense, combined with the process of metal or alloy deposit on the surface of workpiece is good.
在电镀溶液中使用连二硫酸和连二硫酸金属盐作为可溶性金属离子和电解质的来源具有潜在的应用。
Dithionic acid and metal dithionate salts are potentially useful sources of soluble metal ions and electrolytes for electroplating solutions.
为了处理电镀车间排出的含铬废水，进行了电解法除铬的小型试验。
For the sake of treating chromium waste from the electroplating workshop, experiments on the electrolytic method of removing chromium were carried out.
该电解液和方法适合于电镀钢材。
The electrolytes and methods are suitable for plating on steel.
连续进行电解直到淀积基本完成为止，在提高溶液的浓度水平后无法在阴极棒未进行电镀的表面进行电镀来判断淀积基本完成。
Continue the electrolysis until deposition is essentially complete, as indicated by failure to plate on a new surface of the cathode stem when the solution level is raised.
锌电镀片的后处理产品表征为：锌镀片经过铬处理或者抗指纹电解印刷处理。
The post treated product of the zinc electroplated strip is characterized in that the zinc electroplated strip is chrome treated or anti-finger printing treated.
研究结果表明，电炉、电镀和电解等纯电阻性或近似电阻性负荷以恒定阻抗模型表示，潮流计算结果更加符合电力系统实际运行情况。
The calculation result on a 5 bus system shows that the new power flow algorithm based on constant load impedance can get more reasonable solution.
研究结果表明，电炉、电镀和电解等纯电阻性或近似电阻性负荷以恒定阻抗模型表示，潮流计算结果更加符合电力系统实际运行情况。
The calculation result on a 5 bus system shows that the new power flow algorithm based on constant load impedance can get more reasonable solution.
应用推荐