电路与器件的模型是进行分析设计的基础。
Circuits and devices 'model is the basis of analysis and design.
采用传统的电路与器件的模型进行电路设计与模拟，已难以适应复杂的大规模电路与系统的设计需要。
Using the traditional model of circuits and devices to circuit design and simulation can no longer meet the needs of complex large-scale Integrated circuit design.
近年来，由于神经网络、模糊逻辑等智能信息处理技术的兴起，电路与器件的建模也开始使用这类方法。
In recent years, because of the emergence of intelligent information processing technology, such as neural networks and fuzzy logic, circuit and device modeling have begun to use such methods.
该候选人是一名应届硕士毕业生，主要研究方向是天线工程与CAD、微波射频识别技术、微波电路与器件。
This candidate is a graduating master graduate, the main research direction is project of an aerial and CAD , microwave radio frequency recognition technology , microwave circuit and device.
通过对数据接收电路CPLD内部参数的调整，可以实现对各种数字接口器件的配置，从而使得电路控制更加简单、灵活与可靠。
By adjusting parameters in CPLD of data receiving circuits, we can implement configuration of all kinds of digital interface devices, which makes the circuit control simpler, neater and more reliable.
光碟机马达驱动芯片作为功率集成电路的一个重要分支，充分体现了控制集成电路与功率器件在单一芯片上的有机结合。
Motor Drive ICs, to be one of the important branches of the applications of SPIC, have symbolized the harmonic combination of the Controlled IC and Power IC within a single chip.
作为功率集成电路运用的一个重要分支，荧光灯镇流器芯片在其实现上充分体现了控制集成电路与功率器件在单一芯片上的有机结合。
Fluorescent lighting ballasts-to be one of the important branches of the applications of PIC- have symbolized the harmonic combination of the Controlled IC and Power IC within a single chip.
这些微器件与信号调节和处理电路集成后，组成了可执行分布式实时控制的微电子机械系统(MEMS)。
These micro transducers can be integrated with signal conditioning and processing circuitry to form micro-electro-mechanical systems (MEMS) that can perform real-time distributed control.
该器件不仅输出电流可调范围宽、允许工作电压变化范围大、电路接口与TTL兼容，而且体积小、调节方便。
The device has several advantages such as adjustable wide current range, controllable wide voltage range, circuit interface compatible with TTL, small volume and easy modulation.
本文介绍了一种高频荧光灯镇流器芯片的设计，在芯片的实现上充分体现了低压控制电路与高压功率器件在单一芯片上的兼容性。
The design of a novel high frequency fluorescent lamp IC, on which low voltage control circuit and high voltage power device encapsulated in one chip, is introduced.
介绍了半导体器件与电路的总剂量辐射效应及其测试技术。
The measurements of total dose effects of electronic devices and circuits are presented in this paper.
器件与电路的模型是进行CAD的基础，建模在数学上实质是函数逼近问题。
Circuit and device modeling play the fundamental role in the CAD of electronic circuits.
本文建立了开关器件在不同关断方式下的统一模型，分析了关断过电压与电路参数之间的关系。
This paper builds a general model of switching devices during different turnoff mode, and analyzes the relationship between the overvoltage and the circuit parasitic parameters.
本发明公开了一种半导体器件与集成电路硅单晶废弃片的回收利用方法。
The invention discloses the method of reclaiming and utilizing the silicon single crystal waste of semiconductor device and integrated circuit.
总结出的这些效应规律可为了解和掌握CMOS数字电路器件与系统整体HPM效应机理规律提供一定的参考价值。
These findings can provides a good reference value for the study of high power microwave (HPM) interference effects towards the CMOS digital circuit devices and systems.
目前承担微电子专业方向的主干课程：固态电子论、微电子器件与原理、集成电路设计，微电子工艺等课程。
It has key courses of microelectronics: solid-state electronic theory, microelectronic devices and principles, integrated circuit design, micro-electronics processing, etc.
EWB是一个优秀的电子电路设计与仿真的软件，主窗口由菜单栏、工具栏、元器件库和仪器仪表栏、控制按钮栏、电路工作区组成。
EWB is a excellent software of electronic circuit design and simulation. Its main window consists of menus, toolbars, parts bin toolbar, control pushbutton and drawing area.
测试系统中采用了以数字信号处理器为核心，以复杂可编程逻辑器件为外围电路，来控制执行部件和测试与接收由外部返回的数字信号、模拟信号和开关信号。
Testing system, in which DSP is the part of core and CPLD is as peripheral circuit, controls operation parts, and test or incept the digital signal, analog signals and switch signals from exterior.
主要步骤包括：器件的射频等效模型分析、混频电路设计与优化、混频电路的阻抗匹配。
The main process includes following: analysis of device model, design mixing circuit, impedance matching.
基于非制冷红外焦平面列阵(ufpa)探测器件进行了气象测云红外成像系统的光学设计、结构设计与电路设计，对系统光学设计结果进行详细分析。
On the basis of Uncool infrared Focal Plane Array (UFPA) detector, the optics, structure and the circuit of the infrared imaging system for cloud meteorological observation are designed.
本文介绍了XSZ-4型显微镜电子变压器电路原理、元器件选择与故障维修。
The article analyses the choice and malfunction of the XSZ-4's microscope electronic transformer circuitry element parts of an apparatus.
海底大地电磁仪为满足上述要求，其内部配备了高精度时钟源、姿态检测器件以及与海底电磁信息采集相关的自动信号测量与存储电路。
In order to solve the problems above, the high-precision clock, detecting posture device and automatic measurement circuit are equipped in Marine magnetotelluric instrument.
同时，复杂可编程逻辑器件的应用，简化了电路的设计，增强了系统的灵活性与可靠性。
Simultaneity, the application of complex programmable logic families simplifies the designs of circuit and enhanced the flexibility and reliability of the system.
如果FPGA上的引脚分配与在电路板一级实现的设计不符的话，就会损坏fpga器件或电路板上的外围器件。
If the pin assignments within the FPGA do not agree with the implemented design at the board level, damage can occur to either the FPGA component or the board-level circuits.
散热片与器件间的电容耦合是电路产生共模辐射的主要原因之一，其对研究电路的辐射发射特别重要。然而长期以来人们将该电容简化为平板电容，采用静电场推导的电容公式计算。
Coupling capacitance between the heatsink and the devices produces common mode emission, which is considered as a constant calculated by a equation resulting from the static field for a long time.
为缩短理论与实践的距离，提高灵活应用数字元器件的能力，提出了组合逻辑电路设计的第五步。
To shorten the distance between theory and practice, improve the ability of flexible application of digital components, logic circuit design is proposed combination of the fifth step.
编码器与译码器是计算机电路中基本的器件，本课程设计采用EDA技术设计编码和译码器。
Encoder and decoder is a basic computer circuit devices. This Curriculum design by EDA design encoder and decoder.
本发明的门极换流晶闸管易于与印刷电路板组装，且使得门控晶闸管与印刷电 路板组成的器件易于维护。
The gate commutated thyristor is easy to be assembled with the printed circuit board, and ensures that a device consisting of a gating thyristor and the printed circuit board is easy to maintain.
半导体器件与集成电路抗静电放电(esd)。
半导体器件与集成电路抗静电放电(esd)。
应用推荐