电瓶充电电源设置在巷道壁上。译为“电源”。
The main power for charging the battery is located on the wall.
这个问题多半是由于网卡的电源设置不当造成的。
Most of the problem is due to an improper power adapter caused.
使用本文提供的技术，根据焦点中的应用程序、用户活动及一般系统性能更改电源设置。
Use the techniques presented here to change your power Settings based on the application in focus, user activity, and general system performance.
单或附加其他地方在图表中，火星将打开电源设置一个令人振奋的春天旋转运动的社会。
Single or attached, elsewhere in your chart, Mars will turn on the power to set an exciting spring social whirl in motion.
现代下降特性电子弧焊电源设置的后拖特性一般是由电弧电压取样作为参考电压形成的。
The electron arc welding power source without sampling of arc voltage is introduced in this paper.
在节点上设置了BMC地址之后，就可以进行远程电源控制，这样的话就可以更加轻松地配置集群了。
After you set the BMC address on a node, you have remote power control, which makes life easier when configuring the cluster.
此外，还有丰富的文档可供更改处理器设置时参考，从而最大程度地发挥基于当前电源动态调整频率的优点。
In addition, extensive documentation is available for changing your processor Settings to maximize the benefits of dynamic frequency scaling based on your current power source.
另外，它还提供命令行工具，这些工具对从远程电源控制到控制台设置的各种IPMI命令进行抽象，可以在同一框架中使用它们。
In addition, it has command-line tools that abstract IPMI commands from remote power to console setup and USES them in the same framework.
如果没有硬件电源控制(没有设置BMCIP地址)，请先从刷新BM c固件开始，使您能够同时设置IP地址。
If you have no hardware power control (no BMC IP address is set), start by flashing the BMC firmware, which enables you to set the IP address at the same time.
现在已讲解了设置和启用SNMP警报的步骤，以下是电源警报的示例。
Now that the steps to configure and enable SNMP alerts have been described, here is a demonstration of a power supply alert.
CPUfreq结构利用调控器和守护程序来为系统设置静态或动态电源策略。
The CPUfreq structure makes use of governors and daemons for setting a static or dynamic power policy for the system.
完成这些步骤之后，SAN上的Linux将设置为主要的候选磁盘，在服务器电源打开和通过自检运行时将从这里启动。
After doing these steps, Linux on the SAN will be set as the primary candidate disk for booting up when the server powers on and runs through its self check.
这个网站给你机会尝试很多重要的功能，如网络，媒体库，Aero桌面，任务栏，电源管理等功能，还可以测试Windows XP模式，远程桌面，位置感知打印，演示设置等其他功能。
You can also test other features like Windows XP Mode, Remote Desktop, Location aware Printing, Presentation settings etc.
修复电源管理和休眠设置，例如休眠以使您的计算机进入待机或休眠状态。
Fix problems with power management and hibernation Settings, such as the inability to put your computer into standby or hibernation mode.
把micro - SIM卡放入您的手机后，需要按住设备的电源键，并且持续几分钟，然后您可以按照屏幕上的提示正确地对您的iPhone进行相应的设置。
After you've got it in your phone, press and hold the power button for a few seconds, and then you'll be prompted with onscreen instructions to properly set up your iPhone.
你需要在BIOS中设置电源管理功能，以便冷却风扇在安静模式下运行，如果有这个选项的话。
You'll want to set BIOS power management to run cooling fans in quiet mode, if that option exists.
应急电源的设置是通信系统设计中的一个极为重要的课题，需要妥善策划、精心设计。
The setting of emergency power supply is a key topic in telecom system design which is need to be well prepared and aborative designed.
通常人们在BIOS设置里可以激活一些电源管理，但在操作系统里的智能设置可使你达到更高的目标。
Often one is able to activate OS-independent Power Management in the BIOS, but an intelligent setup in the operating system adapting to different situations can achieve much more.
一接头，设置在上述芯线及包覆层的首端与电源的供电线的连接处，用以包覆所述的铜绞合线与电源的供电线的电气连接的塑料罩壳。
A joint. It is set at the connection of the cover head of core with power supply wire to cover the plastic casing of electric connection of copper strand and power supply wire.
电源状况：本工程的变电所设置在界区内的西北侧，其中包括10KV分界室及变配电室。
V. power Supply Situation: transformer station of this project is set at the northwest side of the factory area, of which there is a 10kv separation room and a power distribution and transformer room.
在所设置的四种供电系统中，由接触网电压直接供电的网压电源是最经济、最合理的供电系统。
Among the four electrical power system mentioned before, the most economical and reasonable one is the overhead contact voltage power supply which is supplied by the overhead contact directly.
开启电源，于力量显示器上设定施力值，计时器上设置作用力时间；
Turn on power, setting force value on power display, and time of acting force on counter.
此中初始化包括：调解堆栈指针、需要使用的内部数据存储器的初始化、设置数控电源的开机输出电压以及CPU中断部分设置。
Initialized which include: adjusted stack pointer, the need to use the internal data memory of the initialization, set up the boot nc power output voltage and CPU interruption of the set.
通用操作有设备的动态连接与移去、设置地址、信息配置、数据传送、电源管理、请求处理及出错处理等。
The common operations are dynamic attachment and removal, address assignment, configuration, data transfer, power management, request processing, request error.
可以对温度控制装置进行人工设置，可根据设定的温度自动开关电源。本款电热水器还在工厂就预先安装了能够在温度控制装置失效的情况下切断全部电源的装置。
The temperature limiting device is of the manual reset, trip-free type and has been factory installed to interrupt all ungrounded power supply conductors in the event of thermostat failure.
注：送丝速度及焊接电压设置范围与配套焊接电源相关。
Note: the wire feeding speed and welding voltage set range are dependent on the selected welding power.
本文介绍了系统设置原则、系统构成、系统功能、票制票务管理、电源及接地。
The paper introduces the system configuration principle, system structure, system function, ticket system and ticket affairs management, power supply and the earthing.
提出了电源系统设置、手术室、X射线室的一些电气设计原则。
The principles of power supply system institution and the electrical design of operating room and X room are proposed.
设置电源开关，可以自由手动调节。
设置电源开关，可以自由手动调节。
应用推荐