通用汽车公司决定大力研发电池组和电源控制系统。
GM has determined to intensify efforts to research and develop battery pack and power control system.
介绍了PLC在机房管理及电源控制系统中的应用。
The paper introduces the application of PLC in the management and PC "s power control system of computer house."
介绍了自行设计开发的微机控制的脉冲MIG焊电源控制系统。
In this paper, the control system of IGBT inverter power source with microcomputer control for pulsed MIG welding is introduced.
提出了一种基于重复控制和瞬时值反馈控制的逆变电源控制系统。
An inverter control system based on repetitive control and instantaneous feedback control is presented.
针对逆变电源控制系统，提出了一种基于重复控制技术的控制方法。
Aimed at the inverter control system, a control scheme was put forward based on the repetitive control technique.
给出了软开关弧焊逆变电源控制系统的硬件系统设计和软件系统设计。
This paper presents hardware and software design processes on control system of the soft-switching arc welding inverter power source.
本文主要介绍IGBT锁相控制电路在感应加热电源控制系统中的设计和应用。
This paper mainly discusses the design and the application of the IGBT phase lock control circuit controlled by the induction heating power supply.
介绍了一种基于DSP的逆变电源控制系统，详细阐述了系统组成结构和软硬件设计。
The inverter control system based on DSP is introduced in this thesis. It is expatiated on the basic frame and the design of software and hardware.
本课题以波控技术为基本指导思想，应用微机技术，对CO_2弧焊电源控制系统加以研究。
In this topic, a new CO2 arc welding power source is researched which is based on the technology of microcomputer and wave control.
讨论了应用DSC MC56 F 8523控制的焊接电源控制系统的硬件设计和软件设计。
The hardware design and the software design of welding power supply control system based on DSC MC56F8523 are discussed.
针对手工焊条电弧焊(MMA)弧焊过程特点，建立了绝缘栅型晶体管逆变式弧焊电源控制系统。
Based on the characteristics of MMA welding process, a new control system of IGBT inverter arc welding power source is developed.
该平台具有强大的在线开发功能，适合于各种数字化电机控制系统和数字化电源控制系统的研究和开发。
The platform is a powerful online development tool. It is suitable for research and development of many kinds of digital motor control systems and digital power control systems.
用数字信号处理器(dsp)和复杂可编程逻辑器件(CPLD)设计了IGBT感应加热电源控制系统。
The control system of IGBT induction heating power supply is designed based on DSP (digital signal processor) and CPLD (complex programmable logic device).
以极向场电源控制系统为研究对象进行时间错误分析，找出影响时间性能的关键因素并提出几种解决措施。
It analyzes timing errors on PF power control system to find out some key factors affecting the time performance.
文章介绍了MSC1210的结构特点和工作原理，并给出在CSR电源控制系统中的硬件电路和软件程序。
The characteristics of structure, the function of pins and the principle of MSC1210 are introduced, and the designs of hardware circuits and software program in CSR Power Control system are given.
实验结果表明，对电源控制系统采用时间错误的解决措施后，能对程序运行过程中出现的时间错误进行及时有效的保护。
Experimental results show that those methods offered to handling timing errors in real-time system can work successfully and availably.
核聚变装置EAST极向场电源控制系统由三层网络组成：WINDOWS监测层、QNX实时控制层、现场总线执行层。
The poloidal field power supply control system of the nuclear fusion device-EAST is constituted of three layer networks: WINDOWS monitor layer, QNX realtime control layer, Fieldbus layer.
由于储存环磁铁电源需要重新设计，并且数量由原来的97台增加到350台左右，所以储存环磁铁电源控制系统需要重建。
Since power supplies need to be redesigned because of the number increasing from 97 to 350, the control system for the power supplies need to be rebuilt.
本文着重介绍了DSP的AD转换模块和PW M生成模块在弧焊逆变电源控制系统中的应用，并给出了相应的硬件电路和软件程序框图。
In this paper, the applications of its AD convert module and PWM module in the arc welding convert system are introduced, and the corresponding hardware circuit and software flow chart are designed.
给出了大功率电源控制系统的控制要求、功能和工作原理以及系统PLC硬件构成图和软件流程框图，总结了系统研制中一些实际问题的解决办法。
To achieve the safe and reliable operation of high power supply in HL-2A Tokamak, an logic control and protection system based on Siemens PLC is applied.
提出了全功能弧焊电源控制电路的各类设计方案，分析了它们的特点；并提出了一种电源控制系统的电路设计方案；分析其基本工作原理和获得的各类电源输出外特性。
The ideas of constructing of the control circuit of full-function controlled power source for arc welding are suggested in this paper, with their features analyzed.
这只小昆虫由外部提供电力和控制，但他计划开发一个板载的电源的传感器，进一步完成机器人的控制系统。
It is powered and controlled externally, but he plans to develop an onboard power source and sensors, and to refine the robot's control systems.
核电站需要现场电源提供动力操作马达、阀门和各项控制系统的仪表，而且还为反应堆堆芯的冷却水系统提供电力。
Nuclear plants generally need ac power to operate the motors, valves and instruments that control the systems that provide cooling water to the radioactive core.
概述了控制系统的电源电路、驱动电路、显示电路与软件设计及信号采集的方法。
The power supply circuit, driving circuit, display circuit, software design and signal collection of the control system are outlined.
除了V6电源和六档变速箱，CHCO11还集合了许多新特性，包括操作型风格的后座和自适应巡航控制系统。
In addition to V6 power and a six-speed transmission, the CHC011 comes with a host of features including executive-style rear seating and adaptive cruise control.
长期的现场运行表明，这一控制系统大大提高了电源的可靠性及中频电源产品质量。
A long field running of the medium-frequency power supply shows that the control system presented in this paper greatly improves its stability and quality.
当然，在液压控制系统中的各种电磁阀等也是需要电源的。
Of course, in the hydraulic control system of the various electromagnetic valve, and so is the need for power.
控制系统主要由电源电路、数字控制电路和机械控制电路三大模块构成。
Hardware system is made up of three modules: power supply circuit, digital control circuit and machine control circuit.
另外，我们还提供电源设备，电气部件和软件控制系统。
In addition, we also provide power equipment, electrical components and software control system.
另外，我们还提供电源设备，电气部件和软件控制系统。
In addition, we also provide power equipment, electrical components and software control system.
应用推荐