在汽车电源电压参数的基础上,设计了点火电子组件测试用电源的有关电路。
Based on discussing the voltage parameter of auto power, this paper designs the related circuits about the ignition electrical module.
本研究提供一简便方法,量测铝表面电解抛光之时间与外加电压参数对表面的影响。
This study provides a convenient method to obtain the conditions of electro-polishing for aluminum.
结合近年来国内外相关文献阐述发电机绝缘老化机理,并提出用统计过电压参数与运行记录相结合的方法,推定绝缘剩余寿命。
Based on the insulation aging theories in recent years, the method combining statistic overvoltage parameters with operational records is proposed to estimate the residual life of insulation.
使用MAX038波形发生芯片产生波形,通过修改MAX038相应引脚的参数方便地实现输出波形的频率和占空比及偏置电压参数的调节。
The waveform is generated by MAX038. It is very convenient to adjust the frequency, duty cycle and offset voltage of the waveform by changing parameters of the corresponding pins of the chip.
物理参数包括CPU温度、内存与文件系统利用情况、接口利用、电压读数,以及其他物理值。
Physical parameters range from the temperature of CPUs, utilization of memory and file system, interface utilization, and voltage reading, among other physical values.
最后,磁通量随时间改变,产生了我们叫做电压的参数。
Finally, magnetic flux varies with time, leading to the quantity we call voltage.
因此击穿电压的检测必须重视电介质击穿现象的电参数值的测量。
The exact determination of the breakdown voltage must therefore be attached to the measurement of an electrical value characteristic of the dielectric breakdown phenomenon.
另外,还对滤波器的结构和参数对输出直流电压脉动和发电机相电流波形的影响及相电流谐波进行了仿真分析。
In addition, the thesis analyzes the influence of the filter structure and parameters on the output DC voltage ripple and the shape of phase currents, as well as harmonics of phase currents.
利用非速度信息,如:电机的电压、电流及电机本身参数,通过滑模观测器产生控制器所需的速度反馈信息。
The control system utilizes a sliding mode observer for the generation of all controller feedback information by means of non-speed information, such as voltage, current and parameters of motor.
电压跌落的发生、恢复时间的精确确定是获得跌落特性参数而首先要解决的问题。
The precise decision of the time that the voltage sag occurs and recovers will be the first problem to be solve for the sag characteristic parameters.
分析了等离子喷涂逆变器在高电压大电流条件下,高频变压器参数设计和IGBT保护问题。
The designing parameters of high frequency transformer and the protecting IGBT in plasma spraying inverter with high voltage and large current is analyzed in this paper.
源-测量单元还可以测量其它的二极管参数,包括正向电压降和击穿电压。
The Source-Measure Unit can also test other diode parameters, including forward voltage drop and breakdown voltage.
在连接交流电源之前,请验证交流电压、相位和频率是否与控制装置外壳门参数板上的相应数据相同。
Verify ac line voltage phase and frequency with the controller data plate on the enclosure door prior to connecting ac power.
同时给出了其牵引绕组电压、电流等系统主要参数的计算。
The system interface parameters calculation, such as input voltage and cur-rent for traction windings is also presented.
以铝合金MIG焊为例,在每种脉冲模式下,分别改善焊接电流、焊接电压、脉冲频率、占空比等参数进行焊接并采集输出电流波形。
Taking MIG welding as example, under each control modes, the welding parameters such as the welding current, welding voltage, pulse frequency, etc.
所以设计此类电压比较器的关键在于对所有参数的折衷。
So, the key of designing this kind of comparator is keeping a tradeoff among all parameters of it.
结果显示,当放大器的负载网络取不同参数值时,分别得到高q值的正弦输出电压和低q值的非正弦输出电压。
The results showed that the sinusoidal output voltage at high Q and non-sinusoidal output voltage at low Q were obtained respectively when the parameters of the load network got various.
通过键盘可设置:功率、测试时长、记录周期、电压下限、电压上限、导线内阻、操作模式、日期、时间等参数。
Power, test time, record period, voltage lower limit, voltage upper limit, lead internal resistance, operation model, data and time parameter can be set with keyboard.
通过实验确定了最佳参数,其中包括:离化电子电流和电压、加速电压、阻止电势、供气压力等。
The optimum parameters, such as electron current and voltage for ionization, acceleration voltage, retarding voltage, gas inlet pressure, were determined by experiments.
本文还涉及到了新型的焊接参数显示系统,可以显示电压,电流和焊接速度。
It also involves a new type of welding parameter display system, can display voltage, current and welding speed.
电能质量中的两个重要参数是运行电压和谐波状况。
Two critical parameters of power quality are run-time voltage and harmonic components.
本文讨论了这种方法的理论基础,ANN模型的结构及用这种方法进行参数和电压稳定性识别的结果。
This paper alsodiscusses the theoretical basis, the architecture of ANN models, the characteristic parameters and voltage stability recognizing result using this new approach.
引出束流大小与源的工作参数、引出结构和电压以及阴极材料有关。
The extracted beam current depends on operating parameter of source, extraction voltage and cathode material.
用于测量光源的电性能参数,测量电压、电流、功率、功率因数。
For measuring the electric performance parameters of light sources, measuring the voltage, current, power and power factor.
实验同时分析了加工参数如加工电压、电解液种类和浓度、加工材料等对冷却孔成形的影响。
The effects of such machining parameters as voltage, type and concentration of electrochemical fluid, materials etc on the cooling hole formation were also analyzed.
由于电缆的电容电感分布参数加剧了电压的变化。
Owing to the capacitance and inductance of the cable distribution parameter intensified the voltage change.
对信号处理电路的工作频率、工作电压、温度补偿等参数进行了分析并给出了具体试验数据。
The signal processing circuit operating frequency, operating voltage, temperature compensation and other parameters are analyzed and presented concrete test data.
通过数值模拟,可以从理论上预言高压单元工作点的稳定性以及输出电压随其他参数波动式的变化。
From the data simulation, the feasibility of the steady work of HVU and the wobbling feature of its output voltage with the change of other parameters can be theoretically obtained.
通过数值模拟,可以从理论上预言高压单元工作点的稳定性以及输出电压随其他参数波动式的变化。
From the data simulation, the feasibility of the steady work of HVU and the wobbling feature of its output voltage with the change of other parameters can be theoretically obtained.
应用推荐