第一次在六大战斗机，用电传控制系统。
For the first time in six major combat aircraft, use telex control system.
针对电传控制增稳飞机进行了进场着陆的飞行品质地面模拟试验研究。
The studies of flying qualities during approach to landing for the fly—by—wire aircraft with control and augmented system were conducted on a fixed—base flying quality simulator in this paper.
这种苏霍伊超级喷气式100飞机是一种现代的、电传控制的支线飞机，座位数从75座到95座。
The Sukhoi Superjet 100 is a modern, fly-by-wire regional jet in the 75 - to 95-seat category.
这项工作也包括了CH - 53直升机电传飞行控制的整合，该整合将使飞机的乘员安全性、环境整合性、任务持久性得到改善。
It will also include integration of the CH-53K's fly-by-wire flight controls, which will allow for improved occupant safety, ergonomic integration, and mission endurance.
其中一份电传说这些控制器发往伊朗，用来控制“铀浓缩级联”——有关成群旋转离心机的术语。
They were headed for Iran, one cable said, and were meant to control "uranium enrichment cascades" - the term for groups of spinning centrifuges.
机械飞行控制系统已经被主动式电传飞行控制系统所取代，电传系统通过计算机来响应飞行员的操作指令，使操作更安全有效。
Mechanical systems have been replaced with electrically activated fly-by-wire controls that use computers to interpret the pilot's commands in the safest and most efficient way.
人体的汗腺是受神经系统控制的，因此可以用皮肤电传导来衡量情绪反馈。
Sweat glands are controlled by the nervous system so skin conductance can be used as an indication of emotional response.
飞行员通过F-16的电传操作系统能很好的控制飞机。
The pilot has excellent flight control of the F-16 through its "fly-by-wire" system.
在一个实施例中，一种装置设置有光源、光学元件、至少一个光电传感器、和控制系统。
In one embodiment, apparatus is provided with a light source, an optic element, at least one photosensor, and a control system.
余度设计是提高电传飞行控制系统安全性与任务可靠性的一种重要手段。
Redundancy management is a key means of improving the reliability of safety-critical flyby-wire flight control systems.
电传动是电动汽车的关键技术之一，它由牵引电机、牵引变流器、控制系统三部分组成。
Electric drive, consists of traction motor, traction converter and control system, is one of the key technologies of electric vehicle.
在此基础上，作者提出了直流电传动机车的控制型粘控系统的设计方案，即粘着自适应控制系统。
Based on these, the author puts forward a design concept in relation to the controlling type of adhesion control on locomotive, that is, the self adaptive concept.
压电传感器和驱动器直接粘贴在母体材料上，和单片机控制系统一起构成了压电式主动减振智能结构。
Piezoelectric sensors and actuators are adhered to the base material directly, and compose the active vibration control system along with the single chip.
由于具有这种奇特的效应，因而在机电传动与控制系统领域有着广泛应用前景。
Due to the Electrorheological (ER) Effect is a kind of remarkable effect, ERF can be widely applied in electromechanical transmission and control systems.
在航空航天飞行器设计中，随着主动控制技术、随控布局及电传操纵系统的普遍采用，飞行控制系统的地位变得更为重要。
With widespread adopting of the Active Control Technique(ACT) and Control Configuration Vehicle(CCV)and Fly-by- wire system, position of Flight ControlSystem(FCS) become even more significant.
采用红外光电传感器实现膏布长度计量控制。
The length metering control is implemented with infrared photoelectric transducer.
采用基于DSP和CPLD的数字化伺服控制技术解决光电传感器的机载应用问题：隔离机体的高频振动并随动于驾驶员头盔。
Digital servo-control technology based on DSP and CPLD is used to solve airborne application problems of optical-electronic sensor: isolating vibration of airplane and tracking pilot helm.
其应用于结构主动振动控制领域的研究，在国外和国内都开展了很多工作，但对于压电传感器和作动器的布局和尺寸优化方面的研究相对较少；
Much research work on active vibration control has been performed. However, the study on optimization of collocation and size of piezoelectric sensor and actuator is an ongoing research issue.
所述控制系统与所述至少一个光电传感器和所述光源两者都可操作地关联，以根据从所述至少一个光电传感器接收的测量值来调节所述光源的光输出。
The control system is operably associated with both the photosensor and the light source, to regulate the light source's light output in accordance with measurements received from the photosensor.
具有电传飞行控制系统的飞机，其飞行品质取决于系统参数。
The flying qualities of the aircraft with FBW FCS is determined by the varied parameters of the system.
论文以自动控制理论和机电传动控制理论以及计算机应用技术为基础，介绍了国内瓦楞纸板包装和纸板生产线的现况。
This thesis introduced the situation of corrugated cardboard crosscut machine based on automatic control theory, electromechanical drive theory and computer theory.
该系统按照坦克电传动的特点、以DSP为主控芯片设计成的数字控制双闭环系统。
The electric drive system is designed on the basis of the electric transmission feature in tank, which composed of DSP is a two closed loop and digital control system.
基于光电传感器的离散布置形式，介绍了一种智能汽车控制系统。
This paper was introduced all vehicles bus protocol and development of vehicles control system.
同时，通过CCD光电传感器将粗纱张力实时反馈到专家控制器，从而保持纱的张力处于某一给定的范围之内。
Using CCD photoelectric sensor the tension of yarn feeds back to the expert controller and keeps under the certain precision.
本文介绍的基于高速嵌入式dsp的双余度数字电传式防滑刹车控制器可以大幅度的提高飞机防滑刹车控制系统的可靠性和安全性。
Based on the high speed inserted chip of DSP, the digital telex anti-skid controller with dual-redundancy introduced in this essay can significantly improve the present system.
为了解决传统电传操纵系统抗电磁干扰能力差、带宽低等问题，提出了飞行控制系统光传方案。
A fly-by-light flight control system was developed to replace the fly-by-wire system which is susceptible to electromagnetic interference and has low bandwidth.
方法：将单片机控制技术和传统的输液器相结合，采用光电传感器、信号处理电路、单片机控制系统、马达伺服电路和机械闸门、数字显示等技术。
Methods: Computer, opto-electronic sensor, signal processing circuit, digital display circuit and a mechanical gate driven by motor are used with common intavenous drips.
该控制系统采用光纤光电传感器检测焊接过程中焊缝的实时熔池深度，并据此调节脉冲焊接电流宽度。
A fibre-optoelectrical sensor is used for detecting realtime depth of weldpool during welding process and pulse current duration is adjusted dependent on the detect depth of weldpool.
实际应用证明，热释电传感器和光敏传感器在智能照明控制中的应用提升了照明控制的智能化水平，节约了能源。
It was concluded that pyroelectric sensor and photosensitive sensor could improve the level of intelligent lighting control and save e...
实际应用证明，热释电传感器和光敏传感器在智能照明控制中的应用提升了照明控制的智能化水平，节约了能源。
It was concluded that pyroelectric sensor and photosensitive sensor could improve the level of intelligent lighting control and save e...
应用推荐