本论文以大型制鞋行业的制造生产线为研究对象，结合面向大规模定制生产模式的特点和相关理论，开发出相应的生产线优化设计系统。
The research is aimed at the production lines plant in shoe industry. A design system for production lines optimization is developed, under the principle of MC.
在之后的5年内每年攀升500亿瓦并帮助企业优化生产线，这样太阳能发电的价格将下降到6美分每千瓦时。
In the next five years, annual construction would rise to 5 GW apiece, helping firms optimize production lines. As a result, solar electricity would fall toward six cents per kWh.
优化与设定新的与现有的自动化工艺，参与优化生产线布局和工艺参数，提高生产效率和产品质量。
Optimization and setting of new and existing automotive processes, Involved in the optimization of the production line layout and process parameters, improve production efficiency and product quality.
其次，通过作业改善和优化，平衡生产线，使员工平均利用率从76%提高到88%左右。
Second, it increases the average usage of operators from 76% to 88% through optimizing operations and balancing assembly lines.
优化设计后的纸面草板生产线兼顾了生产率和经济性两方面的要求，总体性能得以优化。
It can meet the demands of both productive capacity and economy of the optimal design straw board production line and the general performance is optimized.
优化物料的摆放和生产线看板的控制周期；
Optimize the material line-side concept and KANBAN control-cycle for production.
生产线的平衡可以通过负荷的优化分配来实现。
Optimal line balance may be reached with optimal load distribution.
提高了称重计量的效率，优化了铜自动包装生产线的现有结构。
Improve the efficiency of the weight measurement to optimize the automatic packaging production line of copper existing structures.
运用整数线性规划方法，结合焊管生产线的实际，提出了焊管配尺优化锯切的方法，并编制了相应的软件。
In this paper, integer linear programming is applied for improving pipe production line. A new method of cutting optimization and the relevant software are present.
一条生产线或接近生产线的直接化学分析可以为有效的过程引导和生产优化提供新的视角。
The direct chemical analysis in or close to a process line enables new perspectives for efficient process guiding and product optimization.
本文采用数字化设计方法和优化设计手段，研究设计了具有操作简易、高可靠性等特点的腈纶生产线移动装箱机。
A simple operating, high reliability Movable Packing machine used in acrylic fiber product lines is designed in this paper by the means of digital and optimum design methods.
最后，基于上述统计资料，分析得出生产线的瓶颈所在，并通过对比得出优化方案。
Finally, based on the above statistics, the bottlenecks of production line were found, and the optimized scheme was obtained by comparison.
本文结合实例对自动化装配生产线的结构原理、生产节拍、生产效率进行了详细的介绍，并提出了对自动化装配生产线进行工序优化设计、提高生产效率的方法。
Structure principles and a comparison of present and ideal cycle time, present and ideal production rate of automatic assembly production line are introduced in detail based on practical project.
提出一种具有逻辑时序特征的微粒群优化算法，并将其应用于半导体封装生产线的工序参数优化中。
A kind of particle swarm optimization method with the characteristic of logical time-sequenced is proposed and applied to procedure parameters optimization of semiconductor assembly product line.
因此新建或改造的生产线基本都配备了优化剪切系统，实现飞剪的最优化剪切。
Newly-built and revamping product lines are basically configured with crop optimization system, which realizes the most optimum cutting.
建立优化程序只是获得了静态的平衡，而生产线的效率要求获得动态平衡。
Creating optimal programs allows static line balancing, while line efficiency provides the dynamic line balancing.
通过这项研究，实现了测试生产条件的优化，提高了生产线的总体产能，实现了降低产品成本的最终目的。
Finally, we can finish OEE improved forecast, balance production line, reduce production burthen, and deliver output to consumers just in time.
为亚洲市场开发或引进新的树脂砂轮产品和通过优化生产线来降低生产成本或提高产品质量。
Develop or transfer new organic products and optimize the process line to reduce manufacturing cost or improve product quality for Asian market.
本文研究所采用的平衡优化技术与方法，对于一般离散型制造企业的装配生产线平衡设计具有理论指导意义和实际参考价值。
The balancing optimization theory and methodology under this study may serve as a valuable reference for the design and optimization of assembly lines in discrete manufacturing enterprises.
具有一定的生产现场布局，生产线建立，生产工艺优化和改进经验。
Have certain production site layout, production lines, optimize production processes and improving the experience.
将重调度策略划分为半导体生产线、设备组和设备重调度层次，利用仿真评价确定优化的重调度策略，并获得样本数据。
The rescheduling strategies are divided into line layer, machine group layer and machine layer. The samples for FNN are setup by simulation evaluation.
负责机械系统的操作和维修管理，保障生产线的环境要求并优化供给系统。
Operation and maintenance management for facility mechanical system stable clean room environmental to production lines and optimize systems.
最后，针对仿真结果分析的生产线中的问题，提出了排产优化方案、在制品控制优化方案、人员配置优化方案分别重新建立了生产线物流的模型。
Finally, the problem of the production line is diagnosed by simulation and the model is rebuilt based on schedule optimized scheme, WIP optimized scheme, people optimized scheme.
通过本研究，实现了生产条件的最优化，提高了生产线的总体产能，最终达到了降低产品成本的目的。
After the study, the BGA line capacity is increased with optimized production, and realized the cost reduction.
本文对CIMS生产线中缓冲区容量进行了优化分配，提出了拉格朗日乘子优化法和启发式优化算法，得到了满意的结果。
This paper discusses the optimal apportionment of capacities of buffers in CIMS production line, presents the Lagrange Operator Algorithm and Heuristic Algorithm, obtains the satisfied results.
并根据生产线工艺流程与生产计划，通过TCL编程实现虚拟生产线的交互式仿真，获得优化的生产线方案。
According to the production line process and production plan, through the TCL programming, achieved interactive simulation and obtained optimized production line.
建立了优化调度模型和优化调度仿真模型，研制了仿真系统，并以重庆某卷烟厂生产线为工程背景进行了仿真。
The optimization schedule models and simulation of CPL are created, and the simulation system is developed, which is run by a CPL in Chongqing as the project background.
建立了优化调度模型和优化调度仿真模型，研制了仿真系统，并以重庆某卷烟厂生产线为工程背景进行了仿真。
The optimization schedule models and simulation of CPL are created, and the simulation system is developed, which is run by a CPL in Chongqing as the project background.
应用推荐