该系统的设计与实现为更为复杂的现场总线控制的设计打下了基础。
The design and implement made a very good foundation for the more complicated FCS.
网络连通性的动态监测是现场总线控制系统（FCS）的重要方面之一。
The dynamic monitoring of the network's connectivity is one of the important aspects of the Fieldbus Control System (FCS).
BOX3000长丝打包机是以现场总线控制技术为基础的机电一体化设备。
UNI - BOX3000 baler is an electromechanical integration device based on fieldbus technology.
由智能传感器和现场总线构成的现场总线控制系统，采用三层线性网络结构。
Based on intelligent sensors and field bus, the three-level linear network was adopted by FCS.
介绍在CAN现场总线控制网络中保证优先级较低站点数据传输实时性的有效方法。
This paper introduces that a real time transmission of some low priority stations can be guaranteed in CAN field bus control network.
指出基于软件冗余同步现场总线控制系统具有可靠性高，利于国内自主开发等优点。
According to the research work and experience, it points that Software Redundant Fieldbus Control System Based has high reliability and is easy to be developed.
提出一种基于FCS的现场总线控制系统，来实现对化工间歇生产过程的管控一体化。
The paper presents a kind of field bus control system based on FCS to realize integrative management and control system for the intermittent chemical production process.
工业以太网和过程现场总线控制技术是21世纪的主流技术，应用也将会越来越广泛。
Industry Ethernet and process field bus is the mainstream technology in 21 century. It is widely used nowadays.
本文主要论述现场总线和现场总线控制系统的定义、构成、功能、优点、发展趋势和应用。
This article discussed the definition, configuration, function, advantage, development, application of Fieldbus and Fieldbus control system.
介绍炼油装置生产过程中现场总线控制系统应用，以及控制系统总体设计、控制系统应用软件开发。
The field bus control system was used in the process of oil refining. This system solution was designed and the application software development to this control system was described.
OPC规范和IEC 61499标准在现场总线控制系统中均属于用户层协议，二者都基于组件技术。
OPC specifications and IEC 61499 standard both are protocols of User Layer of FieldBus Control System(FCS), and both are based on software component technology.
介绍了应用现场总线控制技术在聚丙烯薄膜生产线上的设计方法，阐述了系统的组成特点及各部分功能。
The designing method of applying fieldbus control technology on polypropylene film production line is introduced, and the composition feature of the system and functions of each section are described.
在对SZ绞合成缆机设备组成简介的基础上，设计了基于模糊神经网络的SZ绞合成缆机现场总线控制系统。
After brief introduction of equipments of SZ stranding machine for optical fibers, this paper designs SZ stranding machine field bus control system based on fuzzy neural network.
结合合成氨厂实践情况，从硬件、软件的角度介绍现场总线控制系统FCS的组成、优点及目前存在的不足。
The paler amply introduces composing and advantages, and currently disadvantages of field- bus control system FCS from hardware, and software and application in the plant.
设计了基于Profibus - DP的现场总线控制网络，介绍了控制系统的硬件配置、系统组态、软件体系。
A monitoring control network was designed based on PROFIBUS-DP, and its hardware, system configuration, software system were introduced.
介绍了以P LC为控制单元，变频器为执行单元的全数字现场总线控制传动系统，重点讨论了系统的构成和实际应用。
This paper introduces the fully digit fieldbus control drive system which consists of PLC and frequency converter. The structure and application of the system are also discussed in detail.
主要阐述JX-300X集散控制系统和基于Profibus现场总线控制系统的教学实训装置的基本构成、功能和应用。
This paper introduces the basic composition, function and application of teaching and practical training device composed of JX-300X DCS and FCS based on PROFIBUS.
在工业过程控制技术上，从分布式控制系统（DCS）走向现场总线控制系统（FCS）是已经在进行并必将由后者取代前者的过程。
The industrial process control technology is just under the shift from DCS to FCS, and the latter will surely replace the former.
论文叙述了变频调速技术在现场总线控制系统中的应用。介绍了该FCS的硬件配置、控制策略组态方案和采用变频调速技术的节能原理。
This paper describes the application of Variable Frequency Device in FCS. The hardware configurations and control strategy configurations of FC$ and the principle of VFD are introduced.
应用HART协议的智能测量仪表和智能执行机构变频器，通过可编程控制器实现总线连接和通讯监控，实现流浆箱的现场总线控制方案。
HART communication smart transducer and brainpower actuator brainpower by A PLC to field bus and communication monitoring, The way is head box field bus control system.
根据管控一体化系统特点，提出了CAN现场总线和以太网综合应用的控制方案，以及采用SHCAN 2000型现场总线控制系统的设计与实现。
According to the character of integration system of management and control, we present the scheme of process controlling of CAN field -bus and Ethernet, and its realization adopted SHCAN2000.
考虑到现场的环境干扰较强，对总线电缆及CAN控制器、驱动器采用了冗余设计，保证数据传输的可靠性。
Considering strong disturbance environment in the field area, redundant design in bus cable, CAN controller and driver is involved to assure the reliability of data transmission.
采用防爆计算机与CAN现场总线将井下各控制分站与井上控制中心进行联网。
With the explosion protected computers and can field bus, the underground control substations and control center can be linked into network.
论述了基于PROFIBUS-DP现场总线的浮法玻璃生产线的PLC双冗余控制系统结构、硬件组态以及软件实现情况。
The PLC double redundant control sys- tem structure , hardware configuration and software running status were described on the basis of PROFIBUS-DP field bus on float glass line .
为了排除人为干扰、提高可靠性，采集数据以可编程逻辑控制器为核心，通过现场总线和以太网的多层网络传送至数据库中。
To avoid interfering by work, data were sampled through a multi-layers network which synthesize the field-bus and Ethernet and center on programmable logic controller.
PLC及变频器是该系统的重要组成单元，各单元之间通过现场总线PROFIBUS-DP组成冶金原料吊车的控制系统。
PLC and transducer are the cell of systemic import, track PROFIBUS-DP constitute the control system of metallurgy stock crane.
它是一种利用多媒体计算机、CAN现场总线和微控制器组成的一种新型的分布式多媒体控制系统。
A new type distributed multimedia control system, which utilizes multimedia-computer, CAN BUS LINE, and micro-controller is introduced.
它是一种利用多媒体计算机、CAN现场总线和微控制器组成的一种新型的分布式多媒体控制系统。
A new type distributed multimedia control system, which utilizes multimedia-computer, CAN BUS LINE, and micro-controller is introduced.
应用推荐