静态特性计算运用零频率的传递函数。
Calculations of static properties are dealt with transfer functions at zero frequency.
动态特性计算和疲劳寿命预估与试验结果相吻合。
Calculated result of dynamic characteristics and estimated result of fatigue life are coincident to the test one.
其动态特性计算考虑了工质及管壁金属蓄热的影响。
Its dynamic model takes the influences of heat accumulation of medium and tube metal into consideration.
给出了拉索式预应力钢架随机内力统计特性计算表达式。
Furthermore, the formulation of statistical properties of the random internal forces of the cable - prestressed steel trusses is put forward.
首先建立了推进轴系的扭振模型，并进行了扭振特性计算。
Firstly the torsional vibration model of the propulsion shafting was built up and its performance parameter was calculated.
飞机燃油质量分布特性计算是一项复杂困难但又是十分重要的工作。
The calculation of mass distribution characteristics of fuel in tanks is a difficult and complicated work.
对钢铝组合截面的截面特性计算予以介绍，可为类似工程提供参考。
The section characteristic calculation of the steel-aluminium composite section was introduced, which may be are reference for similar engineering.
为飞行器设计初期的喷流气动特性计算提供了一种适用的计算手段。
At the initial stage of vehicle design, the contributed engineering approach provides a powerful backing for prediction jet aerodynamic characteristics.
第二，运用这些特性计算传感器和挡风玻璃的操作范围，以此评估它们的兼容性。
Second, using these characteristics to compute an operating range for both the sensor and windshield in order to assess their compatibility.
本文介绍了一种涡格方法，它适用于亚声速飞机的纵横向气动特性计算。
This paper presents a vortex lattice method which is suitable for the calculation of subsonic longitudinal and lateral aerodynamic characteristics of aircraft.
然后，建立了一个剪刀式尾桨气动特性计算的分析模型，并进行了验证。
A free wake analytical model is then developed for predicting the aerodynamic characteristics of a scissors tail rotor and validated by numerical examples.
本文是针对一个已建成的集装箱岸桥模型，对其进行动力特性计算与试验分析。
In this paper, the dynamics characteristics and experimental research of the bridge crane modal are analysised.
在研究颗粒辐射特性的电磁理论中，粒子复折射率是颗粒辐射特性计算前提和基础。
In studying the characteristics of electromagnetic radiation particle theory, the particle nature of the index of refraction is the prerequisite and basis for the particle radiation.
以柯特略尔法为例，对在级叠加式涡轮特性计算时使用逆算法的适用性进行了讨论。
Taking Kotlial method as an example, this paper discusses the applicability of an inverse computation method for the calculation of stage superimposed type turbine performance.
本文提出一种能够实现三维可视化的燃烧室内燃油分布和喷雾着壁特性计算的方法。
A simulation method for fuel distribution and impinging in DID engine combustion chamber was proposed to realize 3-d visualization.
这种方法不仅适合于传统的静水力特性计算，又适合于任意浮态下的静水力特性计算。
This method is appropriate to not only the calculation of the conventional hydrostatic performances but also the ones under any inclination floatation.
根据拍摄结果，分别采用标尺测量、颗粒重力沉降特性和声波夹带特性计算颗粒粒径。
According to the pictures taken, particles diameters are evaluated by gravitational sedimentation, acoustic entrainment respectively, and measured by ruler.
本文采用接触理论有限元数值方法加特征值计算的方法来解决考虑连接面固有特性计算的问题。
The finite element method (FEM) of contact theory and eigenvalue computing is used in this thesis to solve the problem of natural modal analyzing aircraft structure with contact surface.
通过算例表明，当这一三维旋转效应应用于叶片非定常气动特性计算时，能大大改善计算结果。
Calculational results of unsteady loads on the wind turbine blade show that the calculation is improved by the 3-d rotational effect.
不但可在目标光散射计算中得到应用，也可应用于对复杂目标的微波散射特性计算建模和仿真中。
It can not only apply in calculating of target optical scatting, but also in modeling and simulating for microwave scattering characteristics of complex target.
编制该梁元剖面几何特性计算及板梁组合结构模型的固有特性计算的Fortran 语言程序。
While the FORTRAN language was compiled to calculate the geometry specialty of the beam element and the inherent specialty of the stiffened plates model.
实际计算表明，本文所编写的有限差分束传播法和掺铒波导增益特性计算程序，均能给出合理的计算结果。
Calculating on practical problems shows that both the finite-difference beam propagation method and the gain character programs can give reasonable results.
最后，根据落石运动特性计算结果，结合拦石网系统特点，提出了拦石网基于落石特性计算布设的原则和方法。
Finally based on the results of rockfall trace calculation combined with the characters of safe net system, the authors presented the conception and method of design of safe net system.
计算结果证明：两自由度电机的矩角特性计算程序是正确可行的，两自由度电动机的各项结构参数符合设计要求。
The results prove that Fortran program of static characteristic in two-degree-of-freedom motor is correct and available.
以广义移动最小二乘法为理论基础，将同时考虑挠度和转角双变量的无单元法运用于欧拉梁的动力特性计算与分析。
Based on the generalized moving least square method, a new Element-Free Galerkin (EFG) double-variable approximation is applied to dynamic characteristic calculation and analysis of Euler beam.
通过理论计算，定量地研究了小型无副翼电动无人机的横航向操稳特性，对不同机翼上反角和垂尾面积进行了横航向模态特性计算与分析。
The lateral-direct aerodynamic data of a SUAV without any aileron with different dihedrals and vertical-tail areas were obtained through an aerodynamic estimation method.
在复杂外形的电大尺寸目标的电磁散射特性计算中，由于一致性几何绕射理论(utd)的本身特点所局限，直接计算必然会带来很大的误差。
As an effective high frequency method, the uniform geometrical theory of diffraction (UTD) has been widely used for calculating RCS of electrically large complex targets.
采用基于等离子体物理模型的时域有限差分方法模拟了金属薄膜近场成像特性；采用薄膜传输矩阵方法计算了金属薄膜对倏逝波分量的放大作用。
The property of the near field subwavelength imaging in a metal thin-film structure is investigated using finite difference time domain method based on Drude model.
这个特性提供对于云计算非常重要的灵活性和随需应变功能。
This feature provides the flexibility and on-demand functionality that is vital to cloud computing.
这个特性提供对于云计算非常重要的灵活性和随需应变功能。
This feature provides the flexibility and on-demand functionality that is vital to cloud computing.
应用推荐