燃油箱通常位于车辆后方。
摩托车燃油箱是燃油供给系统的关键部件。
Fuel tank is one of the important components of the fuel supply system in motorcycle.
燃油箱用以储存燃油。
另一种类型的蒸气分离器安装在燃油箱的顶部。
Another type of vapor separator is mounted on top of the tank.
在机翼内部，主梁之后是两个55l的燃油箱。
Inside the wings, boxed behind the main SPAR are the two 55lt fuel tanks.
燃油箱内的高真空，会引起大气压力压塌油箱。
A high vacuum in the fuel tank can cause atmospheric pressure to collapse the tank.
某种辅助燃油箱不能用蒸汽清洗，或受到过渡的热。
Some auxiliary fuel tank must not be steam-cleaned or exposed to extreme heat.
排干燃油箱至收容箱或适当标志为迪塞尔的安全容器。
Drain fuel tank dry into holding tank or a properly labeled diesel safety container.
一个大型600立方公分燃油箱可供较长的飞行时间。
缓冲隔板，在燃油箱或滑油箱内阻止液体流动的隔板。
BAFFLE, A partition in a tank or reservoir to prevent fluid movement in the tank or reservoir.
这个系统能收集从燃油箱和化油器泄漏出来的汽油蒸气。
This system traps the gasoline vapor escaping from the fuel tank and carburetor.
这个系统能收集从燃油箱和化油器泄漏出来的汽油蒸气。
This system traps the gasoline vapor excaping from the fuel tank and carburetor.
位于飞机燃油箱底部的蒙皮内，用以量取燃油油量的部件。
A component located in the bottom skin of the fuel tank for measuring fuel quantity in the airplane tank.
试验结果证明，镀锌钢板能满足汽车燃油箱的工艺和使用要求。
The experimental results have proved that zinc plated sheet steel can meet the processing and service requirements to the automotive fuel tanks.
汽车内泄漏污染物的四个位置是燃油箱、化油箱、曲轴箱和尾管。
The four places in the automobile from which pollutants can escape are the fuel tank, carburetor, crankcase and tail pipe .
汽车内泄漏污染物的四个位置是燃油箱、化油箱、曲轴箱和尾管。
The four places in the automobile from which pollutants can escape are the fuel tank, carburetor, crankcase and tail pipe.
本文给出了一种高位燃油箱自动供油系统能有效地解决这一问题。
In this paper, the author intends to introduce the design of the automatic fuel supply system of a high-positioned fuel tank for the purpose of solving this prob...
本文给出了一种高位燃油箱自动供油系统能有效地解决这一问题。
In this paper, the author intends to introduce the design of the automatic fuel supply system of a hi...
一个活性炭罐控制燃油箱的蒸汽，另一个控制化油器浮子石的蒸汽。
One canister handles the fuel tank vapors, and the other handles the carburetor float -bowl vapors.
沈阳汽车附件厂是生产汽车燃油箱的专业制造商，年生产能力为20万只。
Shenyang auto Accessory Factory is a specialized manufacturer in auto fuel tank. The output comes to 200 thousand units.
有些技术员利用红外线排气分析仪来迅速检测燃油箱周围的少量的蒸气泄漏。
Some technicians use the infrared exhaust analyzer to quickly detect small vapor losses from around fuel tank.
燃料系只有这样几个主要部件，如燃油箱、输油泵、燃油滤清器、化油器、进气歧管等。
The fuel system only has several major parts such as fuel tank, fuel pump, fuel filter, carburetor, intake manifold, etc.
有效的方法是采用高位燃油箱供油方式，但如何保持其油面恒定是实际操作中的一个难题。
In order to meet this requirement, to adopt the fuel-supplying mode of a high-positioned fuel tank is an effective measure, but to keep the constant fuel level is difficult in operation.
在上面所给出P 0442示例中，燃油箱液面位置，进气空气温度和歧管绝对压力传感器将被应用。
In the P0442 example above, the fuel level, intake air temperature and manifold absolute pressure sensors are used.
本文建立模型分析中空填充网状聚氨酯泡沫材料抑爆原理，推导出燃油箱内混合气体燃烧反应终压计算公式。
Model for analyzing the explosion suppression mechanism of void design reticulated polyurethane foam for fuel tank was set up.
具有降低制造成本，避免环境污染以及镀锌板不易锡焊等优点。适用于所有汽车燃油箱加油管与油箱的连接。
It has the advantages of low manufacture cost, no environmental pollution, etc. and is suitable for all kinds of automobiles.
发达国家的许多钢铁厂开发了各种无铅且耐蚀性更好的汽车燃油箱用表面处理钢板材料，包括无铅镀层钢板和预涂层钢板两大类。
All kinds of Pb-free surface treatment steel sheet for automotive fuel tank with better corrosion resistance were developed by many steel company in the developed country.
一种汽车燃油箱加油管连接密封处工艺改进方法，先用点焊方法将加油管与油箱连接若干点，然后用粘接胶将加油管与油箱连接处密封。
The improved hermetic connection method includes spot welding to connect the filling pipe and fuel oil tank and then adhesion connection and sealing with adhesive.
一种汽车燃油箱加油管连接密封处工艺改进方法，先用点焊方法将加油管与油箱连接若干点，然后用粘接胶将加油管与油箱连接处密封。
The improved hermetic connection method includes spot welding to connect the filling pipe and fuel oil tank and then adhesion connection and sealing with adhesive.
应用推荐