热管换热器形式多样、结构复杂，因而如何选择其形式是工程应用中的一个重要环节。
Heat pipe heat exchanger has many types, it is important how to choose them in engineering application.
不锈钢换热管是换热管是换热器的元件之一，置于筒体之内，用于两介质之间热量的交换。
Thee heat exchange tube of the stainless steel is one of the elements of the heat exchanger, which is arranged inside the cylinder and is used for the heat exchange between the two medium.
这些结果对热管换热器的防止低温腐蚀设计有一定的参考价值。
The relative curve between heat tube constructive parameter and wall temperature is obtained.
所得结果给热管集热器的制造指明了方向，精心制造高效率的冷凝段换热器将是提高此类热管集热器的主要部分之一。
The results also indicated that the most important for a thermally better collector is to improve heat exchange of the condenser.
介绍了重力热管换热器的工作原理、结构和传热特性，以及重力热管换热器在均苯四甲酸二酐生产中的应用情况。
The working principles, structure, and heat transfer characteristics of the gravity heat pipe heat exchangers, and their application in production of pyromellitic dianhydride anhydride were presented.
热管及热管换热器具有传热效率高、结构简单、安全可靠、安装方便、流体阻力小、不需维修和外加动力等优点，已经获得了广泛的工业应用。
The heat pipe and heat exchanger have the advantages of high heat transmission efficiency, simple structure, safety and reliability, small fluid resistance, needing no repairing and additional power.
利用该模型，采用复合形优化法，用QBASIC语言编程，在安装热管的面积一定状况下对碳钢-水热管换热器的结构进行优化。
QBASIC was used to make procedure, structure of heat pipe was optimized with complex method on condition that the area of fixing heat pipe was invariable.
预热法包括用热管换热器、管式换热器、板式换热器、热媒式换热器和蓄热式热风炉。
The preheating method includes heat-pipe exchanger, tubular heat exchanger, plate heat exchanger, heat medium exchanger and regenerative hot stove.
文中介绍一种利用工艺中液体冷却放出热量来加热气体的分离式热管换热器。
The paper introduces the separate type heat pipe exchanger to heat the gas from process liquid.
本论文主要完成了应用于空调系统热管换热器的模拟计算和优化设计的研究。
In this paper, simulation calculations and optimum designs for this heat exchanger were chiefly discussed.
介绍了以液态金属热管技术为代表的高温热管换热器的研究与工业应用。
The research and industrial application of high temperature heat pipe heat exchanger represented by liquid metal heat pipe technology was introduced.
得到了较为理想的优化结果，为热管换热器的设计提供了理论依据。
The result of optimize was good, the research put up the theoretic basis of the device of heat pipe.
本论文主要完成中温热管空气换热器模拟计算和优化设计的研究。
In this paper, simulation calculation and optimum design for the moderate-temperature heat pipe heat exchanger were chiefly discussed.
对板式换热器、波纹管换热器和超导热管换热器的特点及使用场合进行了分析、对比。
A comparison and an analysis are made of the characteristics and situations of use of plate, corrugated tube and super conductive heat pipe exchangers.
在预测管壳式换热器的振动时，准确地计算换热管的自振频率是非常重要的。
Calculating natural frequencies of the heat exchanger tube is an essential step in predicting its potential for flow induced vibration failure.
基于热管原理将燃烧室、蒸发器和换热器集于一体，构成了新型高效热管式加热炉。
The new heat pipe type heating furnace with high efficiency based on heat pipe principle is consisted of the combustion chamber, evaporator and heat exchanger.
热管换热器是一种新型换热器，它是回收工业余热的理想设备。
The heat pipe heat exchanger is a new kind of heat exchanger, which is an excellent device to recover industrial waste heat.
热管换热器换热效率高，具有广阔的推广应用前景。
Hot-pipe heat exchanger has high heat efficiency and a broad prospect for its application.
本文提出了热管换热器加热段和冷却段的三种长度比：流通长度比、经济长度比和许用安全长度比。
Three kinds of length ratio of evaporator to condenser of heat pipe heat exchangers are proposed: the flow length ratio, the saving length ratio, and the allowable safety length ratio.
对热管换热器工业应用过程中热管存在的相容性、积灰结垢和低温腐蚀等几个主要问题进行了分析，提出了相应的解决办法。
Problems such as compatibility, ash deposit and corrosion which appear in industrial application of heat-pipe exchanger are analyzed, meanwhile, measures are brought forward.
这些原则不但适用于气-气热管换热器，而且也适用于气-液热管换热器。
These principles are applicable not only to the gas- gas heat pipe heat exchangers but also to the gas-liquid head pipe heat exchangers.
简述了管壳式换热器管程强化的研究进展，着重介绍了几种强化传热管的研究情况。
The paper presents heat transfer enhancement research development in tube side of shell-and-tube heat exchanger, specially enumerating several heat transfer enhancement elements.
热管换热器是一种高效的换热装置。
将热管作为换热元件应用于相变蓄热系统中，研制了一套热管式相变蓄热换热器。
Using heat pipes as the heat transfer component in latent heat thermal energy storage system, a set of heat pipe heat exchanger with latent heat storage was designed and manufactured.
核动力装置中的燃料元件棒和换热器传热管，常按多跨连续梁模型进行动力分析。
Dynamic analysis model of the nuclear fuel element and the tube of heat exchangers in nuclear power installation is treated as a multi-spanned continuous beam.
本文介绍了换热器中使用的粉末冶金传热管的生产工艺、性能和应用。
This article presents the production technology, performances and application of powder metallurgic heat-transfer pipe used for heat exchanger.
列管式换热器的换热管束与管板连接一般均采用焊接加胀接的密封固定工艺。
In general a sealing technology involving welding in combination with expand jointing is used for connecting a pipe column to a tube plate in a tubulature type heat ex- changer.
介绍热管及热管换热器的特点，设计了试验用热管中冷器。
This article introduces the characteristics of the heat pipe and heat-pipe heat-exchanger, and the author designed a heat-pipe intercooler for experiment.
热管换热器是一种新型的高效换热设备。
The heat-pipe exchanger is a new-type, high-efficiency device of heat transfer.
热管换热器是一种新型的高效换热设备。
The heat-pipe exchanger is a new-type, high-efficiency device of heat transfer.
应用推荐