对焦炉的热态修理技术进行了分析。
最后进行了冷、热态性能与运行优化调试。
Finally, we make a debugging of cool and hot performance and operation optimizing.
介绍了一台用于研究火焰特性的热态实验装置。
The paper introduces a set of experiment equipment which researches on flame characteristics.
本文主要介绍了热态中唇砖的更换细节及应注意的事项。
This article introduces the changing details of lip brick in hot state and the noticed items.
结果表明，延长焖炉时间可使焦炭热态性能得到明显改善。
As a result, coke thermal state performance can be obviously promoted by prolonging banking time.
并给出了基于可调隔热板的准恒温燃烧的热态试验部分结果。
Some hot state test data of quasi isothermal combustion with adjustable heat insulation boards are presented as well.
介绍了聚酯反应器热态试验装置的设计、制造与试验运行过程。
The design, manufacture, and test run of the hot test units for polyester reactors were presented.
着重分析了热态光场在此作用过程中所展现出的光子统计特性。
We also study the photon statistic properties of thermal radiation field in the process.
系统分析了高炉用新型埋管式铸铜冷却壁的热态性能及热变形。
The thermal properties and deformation of new type cast copper stave with buried copper pipe were studied.
对电弧炉炼钢用集束射流氧枪的射流特性进行了冷态和热态试验。
The cold test and thermal test for the jet characteristics of coherent jet oxygen lance have been carried out.
数据处理中，考虑了热态试验过程中，金属被氧化而增加的重量。
The additional weight due to metal oxidation in the test process is considered in test data processing.
在自行研制的热态试验炉上对圆孔型铜冷却壁进行了热模拟试验。
The hot test of the copper cooling stave with circular channels was done in the test furnace designed by the authors.
对废塑料的软化特性、差热分析及热态造粒工艺进行了系统的研究。
The research of the softening characteristics, DTA(differential thermal analysis)and granulating for waste plastics was described.
经过冷态调试、热态实验和长期运行，验证了该系统的稳定性和可靠性。
Stability and reliability of the system have been proved by cold adjustment, warm experiment and persistent operation test.
用数值方法模拟了液体火箭发动机燃烧室内有无隔板两种情况的热态解。
The hot flow fields in liquid rocket engine combustion chamber with and without baffles are simulated numerically.
炼铁系统随着高炉生产的不断强化，对焦炭的热态性能要求也逐步提高。
Following constantly strengthen producing, demanding to coke's hot reactivity is also improved by puddling system.
在可模拟链条炉中燃烧过程的热态实验台上，研究了块粒型煤的着火时间。
The ignition delay time was studied on the hot position bench that could stimulate combustion process of traveling grate furnace.
针对高炉新型炉体冷却结构，设计了物理模型并建立了热态模拟实验系统。
In this paper, physical model is designed and thermal simulation experimental system built for new type cooling and lining structure of BF.
该文以热天平和半工业性热态试验系统对高钙煤灰增湿脱硫过程进行了研究。
The experiments on humidification desulfurization by high calcium coal ash were carried out at a thermo balance and a semi industrial test ring.
某些制造厂商反对在发动机处于热态以及冷却系内压力依然较高时打开水箱盖。
Some manufacturers warn against taking off the cap when the engine is hot and pressure in the cooling system is high.
可以看出热态光场的平均光子数和多光子跃迁对光场非经典性质有强烈的影响。
It can be find that average photon number of thermal radiation field and multi-photon transition process have intense influence on the non-classical properties.
在不同的炉型和不同的结焦时间条件下，研究了焖炉时间对焦炭热态性能的影响。
Under the condition of different furnace type and coking time, influence of banking time of coke oven on coke thermal state performance is studied.
煤氧竖炉熔化废钢的热态试验研究表明：采用煤氧竖炉熔化废钢在工艺上是可行的。
The experimental research presented in this paper shows that scrap melting with coal-oxygen shaft furnace is technological feasible.
对一种新型流化床热处理电炉的流化特性，热态升温特性及电特性进行了试验研究。
This paper studied the characteristics of fluidization, eating up and electricity on a new-type fluidized bed heat treatment resistance furnace.
减少机床热变形的方法为：进行热误差建模和补偿，温度控制，热态特性优化设计。
The methods to reduce the machine tool thermal deformation are: thermal error modeling and compensation, temperature control, optimization design of thermal state characteristics.
在小型滴管炉内进行了采用生物质废弃物作为再燃燃料还原模拟烟气中NO的热态试验。
Adopting biological wastes as reburning fuel to reduce NO in simulated gas, hot test has been carried out in a small dropper tube furnace.
着重介绍了在高温高压水试验台上进行的立式蒸汽发生器汽水分离装置的热态考核试验。
The article puts emphasis on the qualification test of the steam-water separating device at hot conditions in a high temperature and pressure water test rig.
产品具有转相率高、活性好、用水量小、流动性好、体积密度高、热态强度优良等特点。
It has good properties such as, high inversion rate, good activity, small water demand, good fluidness, high bulk density, excellent thermal strength etc.
产品具有转相率高、活性好、用水量小、流动性好、体积密度高、热态强度优良等特点。
It has good properties such as, high inversion rate, good activity, small water demand, good fluidness, high bulk density, excellent thermal strength etc.
应用推荐