大型铸铁、铸钢件，钢结构件、大型锻件，热处理件的清砂、除锈去除氧化皮表面清理等。
Sand and rusts removing of large-sized cast iron, cast steel, steel structures, large-sized forging and surface treatment of oxidized work pieces.
这些零件已全部经过热处理。
现主要从事摩托车、汽车零部件的开发和制造，摩托车零部件的热处理。
Now it mainly focuses on development and manufacture of motorcycle and vehicle components and heat treatment of motorcycle components.
龙门刨床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
床身等关键件的回火、震动时效、超音频淬火等热处理工艺，使机床精度更稳定，使用寿命更长。
Heat treatment technics such as tempering, vibration aging, induction quenching and so on adopted on key parts like bed enable more stable accuracy and longer working life.
离合器钢片多数是大直径的薄片件，技术要求高，热处理难度较大。
Most clutch sheet steels have a diameter of large size, and need higher technology requirement, and the heat treatments are difficult.
产品均采用优质球化冷墩线材，使用台湾进口模具成型，台湾热处理炉和台湾表面处理工艺，并执行首件检测、自主检测、巡回检测。
Our raw material is the cold heading spheroidized wire with high quality. We adopt the Taiwan heat treatment furnace and Taiwan surface treatment process to mold with molds imported from Taiwan.
对触变成形AZ91D镁合金件进行了不同条件的热处理研究。
The heat treatment of thixoformed alloy AZ91D was studied in different conditions.
详细介绍了主要受压件的焊接工艺、整体消除焊接应力热处理技术以及关键的检验控制点。
The welding procedure of main pressure parts , its bulk heat treatment and checking point are detailed.
制动轮是门座式起重机制动装置的关键零件，制动轮在生产制造和使用过程中的早期失效及热处理缺陷是影响生产成本及效率的重要因素。
The brake wheel is a key part of portal frame crane, and its earlier failure and heat treatment defect during manufacture and use is the key factor, which affects the cost and efficiency.
主要分析各种热处理方法及其他因素使金属零件产生裂纹的原因。
Analyzes the causations of crack in metal parts casused by heat treating and other factors.
本文摘自作者关于电磁感应热处理的新书，全面地概述了齿轮淬火，包括零件的材料选取、硬度模式、线圈设计和加热方式等。
Extracted from the authors' new book on induction heating, this comprehensive overview of gear hardening includes sections on material selection, hardness patterns, coil design and heating modes.
用金属磁记忆检测技术，对不同热处理状态下焊接件的磁场强度进行了检测和分析。
The magnetic density of weldments was detected and analyzed in different heat treatment conditions by metal magnetic memory technology.
针对本厂生产的柴油机中合金铸铁和低合金钢表面热处理的大型零部件进行对比测试，扩大里氏硬度计在实践中的应用。
In this paper, large alloy iron parts and low-alloy steel parts after surface heat treatment, used in the diesel engine, were tested and compared. By Leeb hardness sclerometer.
介绍了渗碳淬火零件热处理畸变的原因，分析了热处理内应力的形成过程。
The present paper analyzed the reasons of heat treatment distortion of carburizing and hardening components and the formation process of the internal stress.
在轴杆类零件生产过程中，热处理后校直是一道关键工序。
Straightening of the shaft after heat treatment is a key process.
在分析这些事故的基础上，讨论感应加热中几个主要工艺参数，以进一步提高感应加热处理零件的质量。
On the basis of analysing the failure main technological parameters in induction heating are discussed in order to further improve the quality of induction-heat treatment parts.
制造的定义为制作生产原料，零件或组装，或热处理，涂装与电镀服务。
Manufacturing is defined as the process of making production materials, parts or assemblies, or heat treating, painting, plating services.
利用红外测温原理，研制出高频热处理时的小目标非接触式在线动态监控淬火件温度的装置。
Using infrared system the apparatus of non-touching at limited-area to monitor the hardening temperature at site is produced for high-frequency induction heat treatment.
根据引进美国P&H公司挖掘机制造技术，探讨了大型挖掘机零件热处理技术要求的规律性。
The regularity of technical requirements for heat treatment of power shovels are investigated on the basis of licenced technique from P & H, U. S. A.
以气门的离子轰击热处理为研究对象，通过对装炉形式、处理温度及工艺方法等试验，探讨了尺寸精度要求较高的细长杆件的离子热处理工艺。
An process of ion bombardment heat treatment for high dimension precision slender rods was discussed through treating the valves with different loading ways, heating temperature, and heating ways.
密封箱式炉热处理零件的质量控制是一个系统工程，包括炉子结构、炉子控制系统、热处理工艺以及操作，其中一个环节出问题都将影响热处理零件质量。
The quality control of parts heat treated in the sealed box furnace is a system engineering, including design, control system of the furnace and heat treatment process as well as operating.
零部件经过热处理，强度高，耐磨性好。
Components are under heat treatment. high impact and good abrasion resistance.
根据生产实践，总结出了在热处理情况下，正确确定热处理零件的技术要求方法。
According to production practice, this paper summarizes the method to accurately define technical requirements on hardening part in the heat treatment.
钢，不锈钢，铜及铜合金的棒，零件和管的热处理连续辊底式炉。
Continuous roller hearth furnaces for the heat treatment of steel, stainless steel, copper and copper alloy bars, sections and pipes.
主要供备件金属零件淬火、氰化、退火和回火等热处理用，尤其适用于紧固件、标准件热处理。
Mainly for spare parts heat treatments and so on metal parts quenching, cyaniding, annealing and tempering USES, especially is suitable for the fastener, the standard letter heat treatment.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
Applications: widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
文章分析了零件的工艺性，着重介绍了不锈钢零件套裁级进模的结构、间隙及模具的热处理。
The article analyses craft nature of part, With the emphasis on introducing the structure and gap of nesting progressive dies design for stainless steel parts and its heat treatment.
为研究锻件喷雾淬火冷却过程，研制了喷雾淬火热处理装置，并对轴类件进行喷雾淬火热处理试验。
For studying spray-quenching process of large-scale forgings, spray-quenching equipment was developed, and experiments of spray quenching on shaft type parts were carried out.
为研究锻件喷雾淬火冷却过程，研制了喷雾淬火热处理装置，并对轴类件进行喷雾淬火热处理试验。
For studying spray-quenching process of large-scale forgings, spray-quenching equipment was developed, and experiments of spray quenching on shaft type parts were carried out.
应用推荐